IP CONFIGURATION

Hello

Please I need help for HP laptop with windows VISTA. My wife made with laptop computer and used a 3G internet connectivity overseas dial for wireless connection, but when she returned to the United States (I don't use of wireless in the United States), I just connected the internet cable from the modem to the laptop, but I received a message server not found. I talked to my internet provider and said this is my IP address that has the problem. If it is the period of INVESTIGATION, how can I do this?

Help, please.

Lanreadekoya

I don't know how it coulld be the IP address because traveling as she did his IP would be constantly changing.  Configure you your wired network to have a static IP address to be added to make the connection (I doubt it)?

Frankly, the solution the simplest is to start from scratch with a wired network connection entirely new, as if you have been logged on for the first time with your default connection.  Then try to log in again and it should work as long that you got ALL the correct settings.  If you are not sure of the settings, contact your ISP, and this time ask them to guide you through the process of set of installation instead of you don't give any real help.  If the person that you are talking don't do, request access to his or her supervisor.  They are forced to help with the problems of this kind – make them earn their salary.

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • Tips to add a VPN router to my current network configuration

    Dear all

    My apologies if the answer to this question already exists, however, I searched in many situations and none seem to match what I'm after.

    I currently have an ISP modem/router in Bridge mode connected to a TC of Apple which is my wireless router, I have 2 Express airport connected to this acting as the extensors of the range.  I have a VPN service through the MyPrivate network I activate on the desired device when required and everything works fine.

    What I want to do now is to be able to use my AppleTV and burning Amazon via the VPN as well so you need to add a VPN router in the configuration.  I want to finish with 2 wireless networks running together for these devices who need VPN and those who are not.  I don't want to lose the opportunity to extend the network to express it however airport.

    If someone could explain to me if this is possible and if so how do I set up the network.

    Thanks in advance

    Mark

    Basically you would need a device that supports VPN-passthrough and VLANS for your goals of networking. MyPrivate network, seems to be a VPN SSL, which is a user-server configuration. In other words, you install a client VPN on your Mac and you connect to the VPN network MyPrivate server to establish a VPN tunnel.

    Networking two or more "separated", should be using a router that supports VLAN services. Each segment of VIRTUAL local area network, in essence, would be a separate, she either wired or wireless network or a combination of both. This would probably be the 'easiest' part for the installation program.

    Now how combining the two would be the question, and I don't know what would be the best way, or even if it is possible.

    A few thoughts:

    • Use a router that supports VLANS. Create at least two VIRTUAL LAN segments. One for Apple TV & Burns, one for Internet access in general. Connect the device to VPN client host on the first segment, and configure for Internet sharing.
    • Download a dedicated VPN network application that supports hosting of third-party VPN clients, like yours. You would still need a router that supports VLAN to provided separate network segments.
    • Hire a consultant network. Let them know what you the goals of networking and ask them to offer potential solutions.
  • Configure my email on Thunderbird

    Hello world

    I use a PC for business purposes (I know it's bad) and I would like to set up my email address in a Thunderbird client. I tried to use my email address in @ mac.com, me.com and icloud.com with iCloud vainly password authentication each combination.

    This means that there is a password different email than the one iCloud and if yes, where can I find it?

    Thank you for your support.

    Lionel

    Here are some links that should help you-

    Configure iCloud Mail in Thunderbird

    Download Thunderbird to work with Apple mail

    Cannot get iCloud email must be recognized in Thunderbird

    iCloud: server for e-mail clients - Apple support settings

    ICloud mail in Thunderbird configuration

  • Old lock to activate ipad asking for Apple ID and password used to configure icloud, which is forgotten. Help?

    My older ipad bouchoirs activation requires Apple ID and password used to configure icloud. I think I know the ID because she tips ***@outlook.com, but not the old password. Help?

    Try https://iforgot.apple.com

    or

    Contact Apple for the Apple ID account security support

    https://support.Apple.com/en-us/HT204169

  • Can automatic unlocking be configured on more than one Mac?

    I can set up this feature on my iMac, but not my MacBook Pro? Can only be used with one machine at a time?

    Hello

    Apple Watch can be used to unlock several Macs using Auto unlock, subject to each Mac meeting the requirements of the system and is configured accordingly.

    Automatically unlock your Mac with your Apple Watch

  • Cannot configure the Pop of Hotmail on Mail account under macOS Sierra

    Hello.

    I'm on a MacBook Air - end of 2014 with macOS Sierra installed.

    I decided to perform a new installation of the latest version of Mac OS. As I did this, of course, I've erased completely any configuration, I had: this has the Mail app.

    I want to create access to two accounts different Hotmail via Mail App. Apple unfortunately, it's automatically my IMAP accounts - something I really don't like / want - and I want to create POP accounts!

    I check online on how to do it (because Yosemite, holding the Option key during the initial installation, no longer works.) I write a bad e-Mail and after trying to access it, I get an error message and automatically mail gives me the possibility to choose between an account IMAP or pop. Also, it requires me to give the outgoing server and receiving code «»

    MY QUESTION IS: What are the current codes for Hotmail? Because I searched online and after typing the (I assume) good, Mail tells me that it does not recognize my email address and/or password. (Be aware that during the execution of this, I also write my e-Mail address correctly!).

    I really need my accounts connected to Apple Mail, BUT I really need to make sure that it doesn't copy emails and not delete them from the server!

    Thanks in advance for any information you can give me.

    Ask Microsoft about the configuration necessary to initialize one of their products to access pop.

  • I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

    I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

    Try this procedure

    Cancel the twinning of your iPhone - Apple and Apple Watch Support

    Spend your Apple Watch a new iPhone - Apple Support

  • Impossible to manually configure the wireless settings.

    I have an Apple Time Capsule of 7.7.7 version and no matter what I do I can't seem to accept my manual settings wireless.  My building a House requires several APs to provide adequate coverage, and time Capsule keeps selecting wireless channels that are in conflict with other access points in the House.  Does anyone know of a work around that will allow me to force the desired channels? I use a Windows PC 10 with Airport Utility for Windows version 5.6.1 configure time Capsule. Here are the steps I followed:

    -Select the "Time Capsule" on the left side

    -Click on the "Manual Configuration" button at the bottom

    -Select the tab "wireless".

    -Radio mode - menu drop down select "802. 11A / n - 802. "11b / g ' (very intentional)

    -Radio channel selection - I select in the drop-down "manual."

    -Select 'change... '. "and choose"36"for the 5 GHz channel and '1' for channel 2.4 GHz, then 'Ok '.

    -Select "Update."

    After restarting the device, I check the settings and I find...

    -Radio mode is back 'automatic '.

    -Selection of the radio channel is 'Automatic' and channels do not necessarily match what I selected initially.

    Someone at - it advice?

    The main problem is that the version of the AirPort for Windows utility is not designed to work with 802.11ac airport base stations. Unfortunately, Apple has not updated this utility since Windows 7.

    The other problem is that Apple has "dumb - which crashed" AirPort Utility for Macs and the iOS devices with version 6.x. One of the things that he removed has the possibility to define patterns of radio and channels that "stick" to the 802.11ac base stations.

  • How to configure automation with Apple TV, Homekit and Hue

    I have what I believe should be a viable home automation installation: a new brand (4th generation, Sept. 16) Apple TV, a hub of hue with the support of Homekit and seven lights attached via the hub.  The lights appear in the home iPad app and can be enabled or disabled here.  I can also do things with Siri on the Apple TV as "turn one room family", and have the appropriate lights.  Thus, it seems that everything works.

    BUT: when I go to the tab "Automation" in the app iPad Home, all I get is a page telling me that I should get an Apple TV to put in place of the automated activities - there is no way to actually DO something.  Am I missing something obvious?  I do this also?  Don't forget that I can control the lights in the House on the iPad, so they certainly know each other...  Thank you!

    Howdy Jim

    Looks like you are unable to configure Automation with your Apple TV. I would check that you have everything set up correctly with the steps described in this article:

    Automate and remotely to your accessories HomeKit

    If everything looks OK, then use the section 'Get help with your home hub' down. Thank you for using communities of Apple Support.

  • How to configure microsoft exchange account

    How to configure Microsoft Exchange account on iPhone.

    I'm getting a problem while creating a Microsoft Exchange account on the iPhone. Can any body tell me How to set up a mail in iPhone because I want to set up an account for Microsoft exchange on iPhone

    Thank you in advance

    Alondra Cooper

    You can read this article to learn how you can put your email on iPhone

  • How can I configure an iPad to iOS and boot up without any question/entry level?

    Hello

    recently, my greatest pain is the process of upgrading a remote iPad (Yes, for old people like my parents). So if I have an iPad set up in a specific way and there is an update to iOS, it restarts and goes through a series of Questions and comments. I don't mind (it's a lie, I DON'T MIND). For literate people no gadget, it is frustrating and therefore for someone by train - remote to help regain access. The Question is: can we have a configuration that goes through an iOS update WITHOUT asking one thing? Maybe an oke pop-up asking 'agree' with setting level and all other Q later? No PIN code of installation ask if I hadn't any prior to installation? I mean, if you please, seriously? I have install i-device in a specific way and I LIKE IT like that. Include a button in the installer to accept all license agreements or agreements after an upgrade without asking. Unless I have clear. PLEASE? I guess anyone who support parents or grandparents remotely includes part of the simple upgrade...

    So, is there a way of "secret"? It will never be a?

    Kind regards

    Thanos

    Hello. Unfortunately, I do not think that lawyers in the County of Santa Clara would be happy for the prior acceptance of the new T & C. It's probably not possible.

  • Inject an apple ID and PW using the Configurator 2?

    Hi all

    Wondering if a id apple & PW can be added to a profile and deployment using the Configurator 2. Sorry if this has been covered, am new to this and learning and discovery I.

    see you soon,

    Kristian.

    Hello, Kristian,.

    AC2 negates the need to have a configuration of account iTunes\AppleID on each device, can I ask why you wanted to do this, there may be a better way? ipads how are you trying to install? ipad users can add their own iTunes account to download other additional applications then deployed via the configurator.

    Kind regards

    Rick

  • Xcode Server installation failed (ssl configuration infrastructure)

    After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

    The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

    Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

    Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

    And then an error stating:

    Xcode Server installation failed (ssl configuration infrastructure)

    Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

    Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

    Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

    Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

    Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

    Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

    20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

    control = getSetXcodePathProgress;

    currentPercentageCompleteRangeMaximum = 10;

    currentPercentageCompleteRangeMinimum = 10;

    currentStep = 'Xcode stop server';

    percentComplete = 10;

    status = running;

    }

    20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

    20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

    (4 / 6) [START] stop nginx daemon

    (3 / 6) Server [START] stop API

    (1 / 6) [START] stop CouchDB

    (6 / 6) [START] stop builder

    (5 / 6) [START] daemon stop control

    (2 / 6) [START] stop repeat

    (5 / 6) [END - 0.05 S] Stop control daemon

    (1 / 6) [END - 0.05 S] Judgment of CouchDB

    (2 / 6) [END - 0.05 S] Stopping repeat

    (3 / 6) [END - 0.05 S] Stop server API

    (4 / 6) [END - 0.14 S] Stop the nginx daemon

    (6 / 6) [END - 0.16 S] Stop generator

    A successful!

    Total time: 0.32 seconds

    20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

    20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

    20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

    20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

    20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

    20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

    20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

    Note : There was a lot of posts like this that I missed:

    20 September 15:50:38 syslogd server [69]: notice of Configuration:

    ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

    These messages may not appear in the standard system log files or in the database of the ASL.

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

    20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

    20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

    control = getSetXcodePathProgress;

    currentPercentageCompleteRangeMaximum = 75;

    currentPercentageCompleteRangeMinimum = 20;

    currentStep = "Configuring SSL infrastructure."

    percentComplete = 54;

    status = running;

    }

    20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

    20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

    20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

    20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

    (1/29) [START] make sure Xcode is accessible

    (1/29) [END - 0.20 S] Make sure Xcode is accessible

    Audit (2/29) [START] version of Xcode is supported

    (2/29) [END - 0.00 S] Check if the version of Xcode is supported

    Developer mode (5/29) [START] if necessary activation

    [START] Running (4/29) xcode-selector - /Applications/Xcode.app

    (29/3) [START] check if the server version is supported

    (3/29) [END - 0.02 S] Check if the server version is supported

    Data directories (6/29) [START] creation by default (if they are missing)

    (6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

    (7/29) [START] create a symbolic link to the current path of the Xcode application

    Access to the repository (8/29) [START] HTTP configuration

    Integration of control (9/29) [STARTED] preparation

    Access [START] SSH configuration repository (10/29)

    (8/29) [END - 0.12 S] Access to the HTTP repository configuration

    (7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

    (10/29) [END - 0.12 S] The access to the repository SSH configuration

    (11/29) [START] establishing the file config for Redis

    (12/29) [START] set up the config for CouchDB file

    (13/29) [START] Setup launchd job system

    (5/29) [END - 0.16 S] Enabling developer mode if necessary

    (9/29) [END - 0.23 S] Preparation of control integrations

    (11/29) [END - 0.16 S] Setting up the config for Redis file

    (12/29) [END - 0.20 S] Setting up the config for CouchDB file

    (13/29) [END - 0.20 S] Launchd jobs system configuration

    Group creation [START] (14/29) for users of service if required

    Saving configuration [START] (16/29)

    (15/29) [START] configuration CouchDB to use all cores

    (14/29) [END - 0.02 S] Creation of service if required users group

    Users of creative services [START] (17/29) if necessary

    (4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

    (15/29) [END - 0.08] Configuration of CouchDB to use all cores

    (16/29) [END - 0.33 S] Configuration of the recording

    (17/29) [END - 0.52 S] Creation of users of the service if necessary

    Configuration of SSL infrastructure [START] (18/29)

    (18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

    Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

    Total time: 4.13 seconds

    The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

    20 September 15:50:41 Server servermgr_xcode [867]: response: {}

    error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

    errorCode = "-1";

    errorDomain = ServermgrXcodeErrorDomain;

    errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

    errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

    errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

    errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

    status = 1;

    }

    20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

    20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

    control = getSetXcodePathProgress;

    currentPercentageCompleteRangeMaximum = 75;

    currentPercentageCompleteRangeMinimum = 20;

    currentStep = "FAILED: SSL infrastructure configuration ';

    error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

    errorCode = "-1";

    errorDomain = ServermgrXcodeErrorDomain;

    errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

    errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

    errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

    errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

    percentComplete = 54;

    status = FAILURE;

    }

    This article is interesting:

    20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

    No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

    Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

    Help to get the Xcode service backup and race would be much appreciated!

    I had this same problem. I typed in the following in the terminal:

    sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

    After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

  • Not an Airprint printer can be configured with a new Macbook Air?

    Recently purchased a new Macbook Air.   Can it be configured with an older printer on our WiFi network that has no Airprint?

    Sure. At the end of the day, COMMAND + P (or CTRL + P in Windows) always sends this same basic command PRINT to the default printer. Any printer that is.

    The only problem is the printer driver software. If the manufacturer of the printer has written a driver that works with MacBook Air, download it, install it and make your old default printer.

  • Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

    Hello

    I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the updates and applications easily with very few questions, because of that I've never felt the need to update to AC2. However, this time during the update of ios and refreshment, I get the error 'complete with an error - cannot install iOS' 10.0.1 And now 12 of my iPads are stuck in recovery mode.

    I tried before wipe them off and re supervise them, but I always get the cannot install iOS 10.0.1 error, followed by all the iPads stuck in restore mode. I tried to update only 1 or 2 at a time. I tried the update/supervise them with no apps queued for installation. I tried to restore the iPad via iTunes, which works, but when I try to put it back on AC1, I still get the same error mode and recovery.

    I tried searching online for compatibility with the new iOS and AC 1 problems but found nothing.

    I would like to know if there is more information I should provide that might help.

    Thank you for your time.

    Ben

    Hi Ben

    Makes your iPad successfully update to IOS 10, we have approximately 400 ipads, I've updated a single ipad at 10 IOS using our MacBook pro AC1 OSX El Capitan to test, ill try another now and see if its success.

    When you connect an ipad update the Configurator re-download the IOS 10 or use a cached copy?

    How your Configurator is connected to the internet (behind Proxy, Wifi, Ethernet), perhaps the downloaded IPSW file is corrupted and need to be redownloaded removed\.

    Kind regards

    Rick

  • Apple Configurator - ios 10 - applications are allowed with a composition problem

    Hello

    We use apple configurator to generate configuration profiles imported into MDM and install remotely to iphones.

    Suddenly, we have a strange problem with configuration and 10 of IOS. In the configuration, we use "Allow only certain applications" and with this settings, we cannot make outgoing call. Nothing happens... (nothing is happen hit the button risk, nothing will happen if select contact and select the phone number and click the call button). Receive works fine... If the configuration profile published and enable the allow all apps restriction, the call works again...

    No idea what has happened in the new IOS? There is a new application of system that we should include in the list of allowed applications?

    Concerning

    Hello

    We have exactly the same problem. We use Apple configurator to generate profiles and import to MDM.

    Suddenly once updated to iOS 10 and assistance to only allow applications in the section - whitelistedAppBundleIDs - we cannot make outgoing calls. Tapping the green button does not work.

    Any ideas what happened after updating to iOS 10?

    Same behavior with iOS 10.0.2 and in the whitelist BundleID com.apple.mobilephone

Maybe you are looking for