IPad 2 Air battery drained and does not load after update 9.3

Similar Questions

• Battery does not load after update

  I have a MacBook Pro end of 2011 and just installed El Capitan. Since then, he has worked super slow. I've upgraded to version 10.11.4 yesterday, hoping that to solve some problems. Now it does not recognize my MagSafe adapter, and it does not charge. I did a reset SMC, but nothing happened. Before the issue of the battery, my screen was black when you start the computer. I did a reset of the PRAM, and it worked. I was stupid and never sustained up to my computer because I don't have an external hard drive. My battery percentage is very low and I have no idea what to do! Help, please...

  Unfortunately timed but you can have reached the point of battery failure.   If you have an Apple store near you, make an appointment and bring in assessment.   I'm sure you'll learn to save more often

• Firefox does not load after update on 09/12/14

  I downloaded the recommended update and Firefox could not connect to the server. Restore my computer to an earlier time and OK all worked.

  Hello Reh3335, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

  Difficulty of problems connecting to websites after Firefox update

• Windows does not load after update

  I just installed windows vista on my calculation, after that I return it. I had to reinstall windows and every time I do the windows update it restarts and when it turns back all that I get is a black screen with nothing load on this subject?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Smartphones BB App World does not load after update 5.0

  I have a BB Storm 9530 and just upgraded to 5.0 software... Several apps came through.  The biggest problem is that BB App World itself would not move correctly. I tried to install it several times. It's going through the download process and in the end, I get a message 'exception eception lack of resource net.rim.device.apps.internal.appstore.resource.BlackBerryAppStore'... How can I get this resource loaded on?

  A difficult start will solve the problem...

• Https: / specific page does not load after udate to 38.05

  https://my.albertahealthservices.ca
  does not load after update of 38.05 on my desk.

  I tried it on my laptop and it will load BUT after having been undated to 38.05 also failed to load this page.

  Other secure pages (Bank) loading OK

  Works well in Chrome and IE

  Error message:
  The secure connection failed

  The connection to my.albertahealthservices.ca while the page is loading.

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Thank you
  Brian

  The site may attempt to return to a lower version of TLS in a way that is no longer allowed in current versions or maybe use a deprecated suite of encryption.

  You can open the topic: config page through the address bar and use the search bar to locate this pref:

  • Security.TLS.insecure_fallback_hosts

  You can double-click the line to edit the prefs and add the FQDN (my.albertahealthservices.ca) to the value of this preference.
  If there are already websites (domains) in this list, then add a comma and the new domain (without space).
  There should be only areas separated by a comma in the column value (example.com,www.example.com).

  If this help you can contact this Web site and ask them to look into this and update their security.

  • https://developer.Mozilla.org/en-us/Firefox/releases/36/Site_Compatibility#security
  • https://developer.Mozilla.org/en-us/Firefox/releases/37/Site_Compatibility#security
  • https://developer.Mozilla.org/en-us/Firefox/releases/38/Site_Compatibility#security

• Updated my iPhone6 to ios10 and now my battery heats up and does not load

  Updated my iPhone6 to ios10 and now my battery heats up and does not load

  I have never experienced this with another iPhone or iOS version

  Of course, it's a problem because I use my phone all day

  What troubleshooting steps have been taken so far?

  Have you completed a reboot, reset or restore such as recommended by Apple?

  Best,

  GDG

• Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

  Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

  Hi TG24.

  Acrobat Reader 16.09.21 is now available in the App Store.

  It should solve the performance problem that you are experiencing.

  We apologize for the inconvenience.

• My battery does not load after my Vista laptop off for 3 months

  my battery does not load after having my laptop for 3 months

  * original title - after a 3 month vacation my battery not charging *.

  Hi jimycaan,

  1. How are the battery once the power is discharged?

  2. what happens when you try to connect the laptop to the main supply and work on it?

  You can update the BIOS and see if the problem is resolved. Follow the steps mentioned in the article below.

  BIOS: Frequently asked questions

  Note: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also consult the following link for more information:

  Solve battery problems

  Hope this information is useful.

• My charger Apple Watch emits a ticking sound and does not load?

  The round magnetic disc at the end of my charging cable is a "ticking" or clicking sound which seems to be the rhythm of a clock. He has recently begun and did not charge the watch. I tried to connect the cable to the USB port on the MacBook Pro rather than on the wall, but still, he clicks on and does not load. Is my favorite charger?

  Hello

  I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation in one goal of your Apple Watch and cable magnetic charge verified and, if recommended by Apple, repaired / replaced (whether under warranty, if it qualifies, or via the chargeable repair service):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  To check your warranty status (the serial number is on the back of your watch):

  • https://checkcoverage.Apple.com

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  If you leave CC 2015 Installer remove older versions of Photoshop you can re - install older versions using the creative Cloud Desktop application or through direct downloads, you can install.

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Download new Adobe CC trials: direct links (no Assistant Manager) | ProDesignTools

  Download Creative Suite 6 applications

• Leave my Pro XI of Adobe Acrobat, reading documents and does not load my original CD.  Where can I download the program from the internet and my key code?

  Leave my Pro XI of Adobe Acrobat, reading documents and does not load my original CD.  Where can I download the program from the internet and use my original key Code?

  Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

• IPhone 6 Plus does not load after upgrading iOS 9.3

  Hello!

  given that I've updated the iOS to 9.3, the phone does not.  The only way to do is to turn off completely.  And it charges very very slowy (5% per hour).  I also used other chargers for iphone genuine and it's the same thing.  The battery down too quickly (10% per hour). And sometimes, the battery goes down 7-8% in a few seconds.  It was perfect before the update but not anynore.

  I have exactly the same problem.  There are many of us that do. I need my phone for work and it is a huge problem, because it won't hold a charge and does not load.