iPad 2 Air drag does not

Curiously, the slide on the feature no longer works on my iPad 2 Air.

I used this much before. It was working fine. I had an iPad Pro 12.9, where I continue to use it. Now, I went back to my iPad 2 Air and it just doesn't work. It shows the small handle, but I can't seem to drag over.

Does anyone else know this?

Try to force the reboot of the iPad - see if the problem resolves

Restart your iPhone, iPad or iPod touch - Apple Support

Tags: iPad

Similar Questions

  • IPad 2 Air screen does not intermittently not

    I have an iPad 2 air with ios9.1 installed. Every so often, the response of the screen for faucets and slides seems to slow down. When I slide across the screen I can see that what really happens is that the iPad I'm removing my finger for a slide becomes a series of notches, as if I'm lifting my finger on the screen. If I type, sometimes I type a letter twice to get the press to register. The only way to the iPad back to normal is a reset, holding the power and home buttons until the Apple logo appears.

    Any other experiences of similar symptoms?

    Hi Madrilleno,

    Please visit Apple support communities.

    It looks like the touchscreen on your iPad that 2 Air is always not responding as it should. To troubleshoot, start with these tips If the screen of your iPhone, iPad or iPod touch does not respond to the touch:

    Check your touch screen

    Make sure your hands are clean and dry, then try the following steps:

    1. If you have a case or a protective screen on your device, try removing it.
    2. Clean the screen with a soft, slightly damp, lint cloth.
    3. Unplug your unit.
    4. Restart your device. If you are unable to restart it, you can force restart your device.

    If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

    Best regards.

  • Why iPad 2 Air cover does not turn or turn off my iPad 9.7 Pro

    I love my iPad 2 Air cover and it fits my iPad 9.7 Pro but he can't or don't switch when I open or close the lid, and yes the lock/unlock option is enabled.

    The magnets are in different places on the new Pro vs iPad iPad 2 air. So where is the cover, it is not aligned with the magnets on the new iPad to be able to use the 'smart' money and power off.

  • I have an iPad 2 Air myPhone does not appear at the bottom of the screen on FaceTime, when call is received. Tried typing the wallpaper nothing.  Could I have accidentally disabled something?  Any suggestion would be appreciated.

    I have an air of the iPad 2. I can't answer my incoming calls on facetime no phone on the screen.  I tried to hit the bottom of the screen and nothing happened.  could I have accidentally disabled somethng? Any help would be appreciated.

    Hello Freckles60,

    After reviewing your post, it looks like you aren't able to answer calls FaceTime on iPad. I recommend you to read this article, it may be able to help solve the problem.

    Get help if you cannot make or receive calls FaceTime - Apple Support

    Thank you for using communities of Apple Support.
    Good day.

  • My iPad is blocked and does not turn on, it is responsible

    My iPad is frozen and does not... It is responsible.

    Hold the sleep/wake and the "home" button until the Apple log appears. -AJ

  • HP Envy 17: HP Envy 17 Notebook Synaptics click & drag does not work

    My Synaptics-click & drag does not work. When I click on an icon it will highlight, then I click on the new icon and drag, and it do not drag. If I manual pushes the lower left corner of the Tablet and make it work. Sometimes it works but 90% of the time it does not work. The problem makes this laptop a laptop of poor and done really click and drag a pain.

    I deleted the driver and installed the latest driver HP Synaptics for my laptop than a couple of times and no luck. I even downloaded the Synaptics ' generic driver for win 8.1 "and it's worse. I can see why there are so many people not loving is not this Synaptics click on the button and I would certainly not buy another if this is not resolved. All other synaptics features work except this one.

    Any help would be greatly appreciated.

    REB

    Figured it out. My mistake. Must click twice VERY quickly and hold to drag on the second. I have been to much too much time between clicks and it wouldn't hang in the window or icon. Hope this helps others who may have difficulty with this.

  • I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

    I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

    If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

  • Dragging does not not on iOS App

    Dragging does not not on iOS App

    Hello

    Anyone know what if by dragging the slider does not work? The mouse pointer and mouse icon actually change everything by pressing the cursor, it seems so recoginzes app, but it does not work (well, a finder window, for example, will move to 2 pixels, but that's all).

    PocketCloud App is the 3.0.126, version I am connected manually to a Mac with OS X via VNC 10.9.4 (in my own WiFi), iOS is updated. I did use the application in a while, but I can't drag worked without problem about half a year ago.

    any advice?

    Thank you, salvo

    Charles,

    Sorry, but PocketCloud has been discontinued and is no longer supported.

  • My Port of Air express does not appear on the usefulness of air port on my iPhone

    I have an Apple air port express router to connect the remote speakers. I installed a new router wireless modem Arris and reconnected successfully the apple tv. However, the air port express does not appear on either of my iPhone airport utility or the menu wi fi iPad. So I have no way to connect air port exress my router to base.

    If your AirPort Express Terminal has already been configured as a receiver AirPlay, and it is not on the current WiFi, AirPort Utility has no way to find. I suggest that you use the button on the airport to restore it to factory settings and to reconfigure it according to the manual. You can also configure your new router to use the same SSID and key as the prior network. Then, the airport will not know the difference.

  • iPad keyboard Smart Pro does not

    iPad Pro is not intermittently at the Smart Pro IPad keyboard.

    Your occurs when you attempt to enter text in the field application of e-mail address

    When the mail application has been opened by Safari to post a link etc.

    Hello BobBurns,

    Thank you for using communities of Apple Support.

    If I understand your message that your keyboard Smart Pro iPad fails all the time. I recommend the steps described in the following article to help solve this type of problem:

    Use your Smart keyboard with iPad Pro

    Get help

    If your iPad Pro does not detect your Smart keyboard or you see an 'Accessory not supported' alert on your iPad Pro, make sure that there are no debris or plastic on the pins of the Smart connector on the keyboard or the Smart Connector on the iPad Pro. Also, try the following steps:

    1. Make sure your iPad Pro and Smart Keyboard are in a position to Type .
    2. Remove the Smart keyboard for your iPad Pro.
    3. Restart your iPad Pro.
    4. Reconnect the Smart keyboard.

    Best regards

  • MacBook Air battery does not load after resetting SMC

    Hi all, hope you can help me with this. My model of Macbook Air early 2014 seems to have some problems with its battery. The battery status says "do not load" and it is stuck at 74%. My charger light is still red and I tried to check the status of the battery, it is said to be normal; also I have reset the SMC and all that stuff that is suggested on the discussion Forum, but still it is of no use. Someone had a similar problem before?

    Try resetting the SMC two times more.

    If this does not help, please contact Apple support.

    https://support.Apple.com/contact

  • Manual synchronization of Photos iPad 9.7 Pro does not

    I just bought an iPad Pro, 9.7-inch, 256GB running iOS 9.3.1. I'm syncing with my laptop that has El Capitan Version 10.11.4. and iTunes 12.3.3.17. They are all updated. When I sync my iPhone 6 more there is no problem at all. All transfers as planned.

    BUT...

    I am syncing manually all of the content on the iPad, but I'm having a problem with the photos. Note that I do not wish to use iCloud for my photos, so please ignore this potential 'solution '. At the start of synchronization, the iTunes reports it's synchronization 13,47 GB of photos (11, 531photos), but the copy of the photos stops at around the label 577 photos.

    I tried all THE photos sync. Does not work.

    I tried to synchronize individual albums. In a 37-photo album, for example, it can transfer only 28.

    I tried to sync from the hot folder on the portable computer, and not the Photos app same problem.

    I have rebuilt the library several times. No change.

    He has no problem with syncing my iPhone more than 6. Why is this happening? What can I do?

    Then...

    On Sunday, I deleted my library of photos on my Macbook and started importing images in the application and the creation of new albums. Then I tried the synchronization process again. Sync failed with 504 photos.

    I took the iPad and my Macbook at the Genius bar yesterday (Monday, April 4). They have tested the iPad iOS and find no problem but, just in case, they have replaced the unit with a new model. I got it home and tried syncing again.

    The same problem. All synchronize EXCEPT photos that stagnates around the label with 504 photos.

    On the Apple store people think that the problem must be with my Macbook. With this in mind, I am currently reinstalling OSX El Capitan and restore my files. I'll get back to you soon.

  • Click and drag does not work Magic Trackpad 2

    I have a new Magic Trackpad 2, paired to a Macbook Pro (mid-2014). It works for the most part very well, but I have a big problem. Dragging never works well. For example, if I want to move a folder in the Finder to a different location, I used for a click or select, then just drag it to the new location. Now it does not work or works so rarely that it is useless.

    I got the 1 trackpad, and I have no problem.

    Make sure that you are not too much pressure.

  • Site does not work on iPad - bar full screen does not full screen

    FREEQUENT home

    The top dark grey bar goes from one side to the other, also on the iPad and pc/mac

    But the clear behind instagramfeed gray bar and dark gray bar background starts from the left, but finished in 5 cm front right on iPad! Im going crayy here.

    The two bars, I copied from the top bar to fix the problem, but still does not work

    Hi hege_d,


    I can't reproduce the problem of 5cm on the ipad. Were you able to fix this issue? Please specify.

    For questions please also send the file to [email protected] to study.

    Kind regards

  • Bug in AIR, landscape does not work

    First: In my FlashCS6 I export for AIR 3.2 and I test on my Samsung Galaxy S3.

    Now on the bug. In Flash, AIR controls under general we have landscape and full screen, I chose the two of them, now, when you open the application on mobile, turn off the screen and you rotate the phone, the screen turns into portrait orientation.

    If 'push' landscape option does not work.

    Any solution for this?

    Download the SDK you want to try, might as well be AIR 3.6 at this stage. Unzip the package to download a file. The folder can keep its name and its location, but out of habit I've name it correctly and put it in the Flash Pro folder. So, I have an AIR3.6 folder sitting next to Flash Pro CS6. Then go to the Help menu in Flash Pro and choose the option manage AIR SDK. There, you can add in the SDK you just expanded and then choose as the version of the player in the properties panel.

Maybe you are looking for