iPad 2 - iBook screen goes black

I have an iPad 2 and use it a lot for reading books on iBook. iBook started to shut down the first time I open the app, but opens on the second try. Time to time (at least once per session), the screen turns black with white writing or not written at all. When he is not writing, I can not read this page and can find no way to stop the app change the color of the page. Also when I close the application, it does not save the bookmark, or my place in the book. I have to make a note where I am so I can go back to the page. This problem is only in the iBook app. The rest of my apps are great, including the Kindle App would appreciate some advice on what it's getting very annoying.

Hello suepernz,

Please ask for help here in the communities of Apple. I will be happy to offer you some things to try to get your application properly functioning iBooks on your iPad again 2. The first thing we want to do is make a backup of all your data in iTunes or iCloud. This link will help with that:

How to back up your device using iCloud or iTunes

Once we know that your data is safe, go ahead and restart the iPad. You need not to do the cover, just a normal reboot will suffice for this.

Restart your iPad, iPhone or iPod touch.

If problems continue, go ahead and try to reset the settings on your device. Go to settings > general > reset, and then click Reset all settings. That it does not reset some of your settings to factory default. It is not a complete elimination of the settings and will not affect your personal data. It deletes all of your preferences for the Wi - Fi (including passwords for each network), Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

If you're still having problems, so we want to get a new version of the operating system, which will bring a new version of iBooks. To do this, you will need to erase your personal data and to define up to nine iPad using iTunes. This link will help you do this:

Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

Once the iPad is set up as new, you will test to see if the iBook issues are pass without your personal data on the device. If this isn't the case, we know, it was with some data on the device or in the version of iOS, which will be in you backups. You can make the data manually using iCloud or iTunes, but not restored from the backup that you will bring the problem immediately in. These two items will help you synchronize your feedback:

Sync your iPhone, iPad or iPod touch with iTunes on your computer through a USB port

Media synchronization between your iPhone, iPad or iPod touch and iTunes on your Mac or PC

See you soon.

Tags: iPad

Similar Questions

  • iPhone 6 screen goes black randomly. Hard reboot solves the problem temporarily

    Hi all

    My iPhone 6 screen goes black randomly (usually during sleep) and when it happens, the fact response to touch or no sound. I know that the phone is on because I can always call another phone and it sounds on the line, but as I said the iPhone does not ring. Hard reboot (press home + power button for a while) will not solve the problem immediately after the restart, but after some time (hours or days), it goes black again and I have to do the same thing.

    No idea why this is happening? Is it a software or a hardware problem?  I'm really curious to know how to restart the phone resolves the problem.

    I am not able to take it to the bar of the kind of these days because of my busy schedule. I wonder what they need to replace when I take it to the store.

    Please, share your ideas.

    Thank you

    Sounds like a problem of software for me, especially because it forces is a troubleshooting step software, and you say that solved the problem (of least temporarily).

    However, I still think that the Genius Bar would be a good idea. They have access to diagnoses that are not accessible by the user, who can easily identify which applications or processes are causing the problem. I think that they can also do this by phone, but I rarely call support so I am not sure.

  • The screen goes black when I click and drag text, use the version on my 18.0.2. Thank you

    I'm entering text in the space of your question and click on a Word to drag it to another location, or if I am writing something in an email on gmail and click on a part of the text to drag it to another part of the text, the screen goes black as soon as I start to drag the text

    -Installing and re - install, it's what makes work - although I've still "hardware... use" unchecked.

  • Updated to firefox9 and now when I use extension of tree style tab the screen goes black, with the exception of the "window of the tab" and the part of the screen behind him

    Update firefox9. Using tree style tab extension. Everything works fine, except that my screen goes black when in 'tab window', with the exception of the window of the tab and the part of the screen behind him. Once out of the tab section everything comes back fine, but it is rather annoying. Checked homepage for the extension and have the updated version, firefox add-on page - it also says that it is compatible. Any ideas on that?

     Am realizing pages will stay on as long as I don't move the mouse,but as soon as I do move it,black goes the screen.
    

    Ok. A installed version 1.4? Manufacturers homepage. This is apparently what caused problems. Get rid of this and installed version 1.3? Since firefox add on the pages. Problems solved...

  • Satellite U920T - the screen goes black when you drag the keyboard

    This morning, I turned on my U920T-10 days but the screen remained black.

    At first, I thought the screen was broken, but in mode 'Tablet', the screen became. Now when I slide the keyboard the screen goes black again.

    How can this problem be solved?

    Hello

    For me, it looks like a bad connection somewhere between the screen and the motherboard.
    This could be possible reason for failure to display while sliding in and out.

    I guess this can be resolved easily and I think that it is a job for a technician (authorized service provider). I recommend you contact the service technician in your country to get the laptop fixed. I hope that the warranty is still valid in order to repair for free.

    I hope that this can be corrected. I keep fingers crossed.

  • HP ProBook s 4540: the screen goes black after the mode "Eve"

    Hello!

    My computer works fine but there is a problem, when I do not use it for a few hours or maybe an hour my screen goes black and it is nothing to do, but closed and then turn it back on.

    I have disabled all parameters almostly, screenshots here:

    #1- http://i.imgur.com/zelMPLD.png

    #2- http://i.imgur.com/FJNyLzi.png

    I don't know what to do, I think it goes to sleep after a certain time and then he don't wake up, I need to remove the battery and then turn again, he started arrive about 2 days ago when I updated my radeon HD7650 to 15.11.1 Crimson video card driver or sth.

    Hello

    Try disabling the startup of Windows 10 hybrid - you can do the following.

    Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

    In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, close all open windows, and then restart the laptop.

    Kind regards

    DP - K

  • Spectrum x 360: screen goes black randomly when on battery and some energy-saving options enabled

    Hello everyone,

    I bought this fantastic machine called spectrum x 360 and I love it.

    Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).

    This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
    This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.

    Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.

    Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).

    The entire screen works fine for normal operations, no artifacts.

    Replication of the problem
    Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
    Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 21.20.16.4494, as of July 25, 2016 and the problem happens much more rarely.
    Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.

    I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):

    -update panel houses;
    -advanced mode; energy saving

    If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.

    In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
    The rest of the computer works correctly.
    Any idea to solve this problem? Or should I keep these options turned off power saving?

    Hi, thanks for your help.

    I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
    Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
    I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
    To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
    It certainly is a problem with this energy-saving option.
    Now everything works fine.
    If the problem appears again, I will post more information.
    Thank you for your support.

    I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible.

  • Qosmio F60-100 - after that upgrade RAM screen goes black

    Hello world
    I upgrade my RAM a g-skill 2 * 4 GB 1066 Mhz DDR3
    I have a Qosmio F60-100
    I am on Windows 7 pro N
    I checked whether they have updated bios (the toshiba soft explain to me, that there is not an update available)
    I checked if the RAM were compatible with my laptop (these have been suggested to me)

    When I put the new RAM in the laptop, in "Starting Windows", the screen goes black and the fan works hard.
    So I'm not able to install my new RAM.

    These ram are compatible with my laptop?
    What is the problem?

    Thanks so much for all those who can help you.

    PS: English is not my mother tongue, sorry about that...

    Hello

    According to your Qosmio notebook specifications can be improved up to 8 GB. The comparable memory modules are:
    2 GB DDR3-1066-PA3676U-1M2G
    4 GB DDR3-1066-PA3677U-1M4G

    I don't know that references your RAM modules but the behavior described is probably as a result of the use of non compatible modules.

  • Satellite C660-1J2 - the screen goes black for a second

    Hey everybody.

    I recently changed my HARD drive and did a reinstall fresh, as previous was damaged. What is happening now is that whenever I have connect or disconnect the cable the screen goes black for a second. There is no real consequence of this, I'd rather just if there was an option to make it happen.

    Then, give a shout someone if you know how to deal with this.

    Hello

    > I have recently changed my HARD drive and did a reinstall of fees
    You have installed Windows from Toshiba normal Microsoft Windows disk or recovery disk?

    To me it sounds like that, you forgot to install the display driver. Also check the Manager of devices for the yellow exclamation points or unknown devices.
    Make sure that correct display driver is installed. You can download the latest version of Toshiba's official website:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Check this box!

  • Portege 7010CT shows Toshiba logo then the screen goes black

    Help! When I turn on the Toshiba logo comes up then the screen goes black and I find myself with a cursor blinking in the upper left corner. Nothing seems to work, keyboard seems locked even though CTRL, ALT & DEL it restarts. Was working perfectly one day, so that the next. Any ideas?

    Hello

    You can start the machine in safe mode? Which operating system you are using? Are you using it for a while or is this first boot after installation.

    Please write a little more. If you give more info and detailed description, it is easier to understand what may be the problem.

  • Satego P100 - the screen goes black

    Hello

    If I turn on my laptop there is no problem. After maybe 5 minutes, the screen goes black and after a few minutes, he just a blue screen. Restarting the laptop. But now I don't have lines on the screen for the display of the BIOS and the power of Windows screen but during the operation. If the laptop is turned on after minutes the same, it goes black and then blue screen.

    BIOS and reinstalled system. nothing happens. I think that BIOS is flawed, because there are lines on the screen when I turn on the laptop again.
    If I leave the laptop for 15 minutes off the coast, it starts normally but aftern maybe 5 minutes it starts again with blue screen and other funny stuff.

    Now - what is someone the problem and a solution?
    I think the BIOS is a virus that destroyed. But I think that on a laptop, it is not possible to change only the BIOS. Because the update of it was ok but the problem remains.

    Thx for the answers and cordially

    I put t think the BIOS is defective. There must be another problem. All that you have done is just. Update the BIOS and the clean OS install are only option that you can do about it.

    Please contact the nearest authorized maintainer and let the technician to check your laptop. Let them to test the operation of the equipment using the service tools.

  • Re: Satellite L350 - screen goes black when I try to play

    I have a laptop Toshiba L350 Sat. Its currently running on Windows Vista. Caused by a virus, I recently had to reinstall Windows. The laptop is now free from virus.

    My problem is that when I try to play some games that I have the screen goes black and I have to do a forced restart using the power button. There are no other noise running in the background, and Ctrl alt del does not work either.

    Is or has anyone else suffered from this problem and if so how they remedy? I'll try to re-installthe drivers when I get home this morning, but I can't think of anything that could be the cause of the problem...

    Any help would be appreciated

    Hello

    Which disc you used to reinstall Windows?

    Normally, if you use the all Toshiba Recovery disk should work fine after that. These parameters are pre-tested by Toshiba.

    In addition, you can try to clean your laptop using a jet of compressed air. This could blow the dust of fans cooling and, therefore, it of not necessary to disassemble the laptop.

  • Windows 7 screen goes black

    A PC brand new, all updates, installed the latest version of Skype.

    When I make a call the screen call comes in then the screen goes black, no video running and so the screen turns off.

    No keyboard input or mouse entries don't work back on screen.

    The call follows through the test call is running its normal cycle.

    Only solution is to manually restart the PC.

    Any ideas?

    Thank you

    Try to uninstall the currently installed version of Skype and install the previous 6.14.0.104 version by using the download links provided here:

    http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

    Be sure to turn off the automatic updates:

    Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

  • Satellite P100 - the screen goes black

    Hello

    I have a Satellite P100 and randomly, the screen goes black but the system continues to operate. I downloaded the latest drivers from toshiba, all power options the maximum support, run ccleaner and driver Sweeper to remove the old entries driver, re-installed the login screen of the mobo and nothing seems to work.

    The screen goes black sometimes when using windows but STILL turns black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.

    Any help would be greatly appreciated.

    Model: Toshiba Satellite P100-PSPA6A-02NO21
    Processor: Intel Core 2 Duo T7200@2GHz
    GPU: Nvidia Quadro nvs 510 m
    Chipset: Intel i945PM
    HARD drive: Fujitsu 148GB
    RAM 2 GB
    Windows 7 Ultimate SP1 operating system

    Hey,.

    > ALWAYS goes black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.
    This means that the graphics card is defective

    Theoretically, it could be an overheating problem too. Higher time can also cause a black screen. You should try everything that is possible to clean your laptop using the jet of compressed air to blow the dust from the cooling fans.

    If it doesn t help it seems to be a hardware malfunction but seriously a point would be interesting: have you noticed the same thing with preinstalled OS (Vista) Toshiba?

  • Satellite L405D-11V - freezes and the screen goes black when you watch the video

    OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

    I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

    However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

    Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

    Thank you

    Hey Buddy,

    You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
    What operating system you use on your L405D satellite?

    To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

    In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
    If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

    If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
    Explain your very detailed problem. I think that everything can be clarified then. :)

Maybe you are looking for

  • TosBtMng message on windows

    I have ASUS laptop that uses bluetooth Toshiba and. Recently, I received the following message: 'TosBtMng' has stopped working. I have been informed that I need to update the driver. If so where and how do I do? I run Windows Vista Business 32-bit. T

  • Chrome crashes constantly

    For these last days, Chrome has been crashing, around 20 to 30 times a day. I sent the accident report to Google and it seems that it is a Mac problem. This was the response from Google: Thanks for the report. We know about it and believe it to be ca

  • Calendar of the RT

    Hello, my question is this. I'm trying to save the value minimum mV for maps of mV. My problem arises when I am recording of data, I use a deterministic loop to try and acquire the signal, then I built an array with all the values that are captured i

  • 98% available (plugged in, not supported)

    When I do an online search, this seems to be a common problem with the computers acer laptops. Obviously you can't remove the battery because it is integrated in the S3, as many people have suggested to do this with removable batteries to reset. the

  • How to save pictures sent by e-mail and organize them for later use?

    original title: photos I took a bunch of pictures with my Ipad and sent to my email address. I want now to download or place them in a folder so I can send them instead of sending of 40 different emails. I also need to be able to send the photos I wa