iPad 2 will not activate after installing 9.3

My ipad2 activate after installing the latest update, ios 9.3.  The only option is to return a page to select the wifi.  He let me try again, but the result is always that your ipad could not be activated because the activation server is temporarily unavailable.  Try to connect your ipad to itunes to activate or try again in a few minutes... over and over and over again.

My iphone6 had no trouble to activate after update.

I connected to itunes, but it is said that your ipad is not recognizable.  Apple does not know I have crops to harvest, collect and angry birds launched coins?

https://support.Apple.com/en-us/HT206203

Tags: iPad

Similar Questions

  • iPad 2 will not activate after update 903

    iPad 2 will not activate after update 903 said only: update completed and just a few steps and you're done displays white screen

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Take a look at these articles:

    Solve the iOS update and restore error in iTunes - Apple Support

    Get help with iOS update or restore errors - Apple Support

  • IPad 2 will not activate after update

    IPad 2 will not activate after the update this morning he says "could not activate ipad, ipad could not be activated because the activation server is temporarily unavailable. Try to connect your ipad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple to Apple.com/uk/support support.

    I tried to connect my ipad to iTunes and I get the same message that I have also restored the ipad and still the same message from Paris! Started to get a little frustrated now. Any help would be great.

    Many users encounter this problem. The server may be overloaded. I suggest to wait and try again later. This can be irritating, but it seems that the only solution for now.

  • Computer will not activate after installing XP SP2 repair

    I see a lot of people have posted on this subject, and some have set.  I did a repair of an old computer installation.  At the start, it says I need to activate my copy of XP.  It just hangs.

    I can boot into safe mode (but not with networking).  I followed the 312295 article, which had me do the following

    1 regedit-localmachine-software... - winnt - winlogon - notify delete RESETS (there was none this entry, so I didn't do anything)

    2... regedit wpaevents OOBETimer 'Edit' (don't know what you mean about a hex file editing, so I just delete a line)

    3 renamed WPA.dbl

    4 extended wpa.db_ from wpa.dbl installation disc (ran OK)

    5 looking for any reset5.* or srvany.exe (no current)

    6 restart the computer.

    The same problem.   Still will not start.  Any other ideas?

    Some recommend to replace IE 8.  I'm certainly willing to do that - except my installation disc is a version of SP2.   So, how can I get a version of SP3 to install in safe mode?   (I download from another computer, but I don't know which version to get).

    Why I installed? There was no failure, but because after 8 years of use the computer was bogged down so he could barely work.

    But if this was justified is besides the point, because it is already done.

    I installed SP3.  I Redid the things listed above.

    I still get the message saying to activate windows and it crashes whenever I try.

    So I took the advice of others, installed IE8 in safe mode.  Upon restart, it worked!  (An arisen window asking me to activate, I said yes and it worked.

    This window looked like IE8 material - probably at the heart of the problem.

    Problem solved.

  • My iPad 2 could not activate after installing 9.03. Say... could not be activated because the activation server is temporarily unavailalble. I tried to 'activate' for four days... went to an Apple store bar 'Genius' and still no solution.

    I have an iPad 2 and before executing the last IOS 9.3 update, it was a camera works perfectly well. I don't have any iCloud upward. I have the valuable photos and info on my iPad that I don't want to lose!  Now I can't even use it!  He failed to activate after the execution of the update and is now in an infinite loop.
    The display shows the following:

    Could not active iPad. Your iPad could not be activated because the activation server is temporarily unavailable. Try to connect your iPad to iTunes to activate it, or try again in a couple if minutes. If the problem persists, contact Apple support. .... Try Again... and again...

    I was 'Try again' for four days and spent a day at the Apple Genius Bar store.  They could not find a "fix" and suggested I send my iPad in California and pay for data recovery, because the next step would be to wipe my iPad!  ***!

    I understand that you're angry about the issue of server activation, but sittuations as why it is so important to backup your data using iTunes or iCloud. You never know when you might have to restore from a backup.

    http://appletoolbox.com/2016/03/iOS-9-3-activation-error-update-fix/

  • iPad 2 could not activate after update 9.3

    updated in 9.3 and now my iPad 2 will not be activated via OTA or iTunes direct connection.

    Please read countless other threads saying the same thing before opening new threads.

  • Windows Vista will not activate after I reload.

    * Original title: Windows Vista

    Hi, I had to reload Windows Vista on my laptop that has been loaded correctly. My problem is that it will not activate its telling me the code and I need to get another.

    This software is used only on my laptop so why wont he accepts the code, can someone help me with this please?

    Thank you

    Hello

    Do the activation of the phone and hold on to explain to a real person it's a reinstallation on the same laptop you do.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • iPad will not activate after update to 9.2.1

    iPad does not illuminate after update to 9.2.1 we get the white Apple then disappears and nothing...

    Try a forced reboot. At the same time hold the sleep and home buttons until the Apple logo appears on the screen.

  • Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

    Model A3E82AV number

    I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.

    I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.

    I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

    I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.

    This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?

    Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

    FIXED!

    I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.

    The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

    For people who can run on the same topic, here's a recap of what I did to solve my problem:

    Centrino 2230 installed 15.18.0.1 driver
    Update driver Bluetooth 10.0.10586.0

    Updated the BIOS to the version of Windows 8 F.2D Rev A

    If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

  • Brother HL-2240 printer will not print after installing Windows.

    original title: MS upgrade on Windows XP

    Help, please.  I installed the recent update of MS for XP and now brother HL-2240 printer will not print.

    KB982670 seems to have something to do with .NET Framework 4 Client Profile.  This update or Windows PowerShell have been updated "critical", then maybe you didn't need to get.  However, it's water under the bridge now.

    When you open the print queue, are shown print jobs as stuck there?  Just to make sure that the queue is cleaned, do the following:

    Open a command prompt window (start > run > cmd > OK)
    Type each of the following commands in the command prompt window and press ENTER after each line

    • net stop spooler
    • del "% windir%\system32\spool\PRINTERS\*.*" {answer Y when prompted}
    • net start spooler
    • output

    It's really only a shot in the water, but he could help and can not hurt to completely uninstall and reinstall the printer.  Follow the directions here: http://www.coribright.com/windows/Article_One.htm

    Get the complete installation package here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/004500/dlf004515.html?reg=us&c=us&lang=en&prod=hl2240_us_eu&type2=1&os=7&flang=4&dlid=dlf004515

  • Reference Dell 926 printer will not print after installing Windows 7

    After the upgrade to Windows 7 my 926 printer will not print. I followed the suggestions found here (unplug the printer on the wall, remove the brick, low load patch R166248 to delete the printer, the latest driver to load, R146832 dated 26/01/07, reboot). Restarts, driver going through complete installation process then I get an error at the end of the process, "the Dell Photo 926 Printer printer driver is not installed". I did this several times. In addition, I restarted the spooler to print several times. No luck. Additional suggestions on how I can get my 926 to work with Windows 7?

    Greg,

    I think that we all regret our first wedding, well most of us.

    Removal of print jobs is a way of really nice to get rid of your documents. After you restart your computer, you should be able to run the fix, Manual printer removal driver and restart once more. Try it to install the Vista drivers in compatibility mode, I used Vista SP2.

    Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change Vista compatibility. Then, install the appropriate drivers. You will be asked when connect (printer)

    To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

    Rick

  • My iPad air2 will not charge after the software update

    My iPad air2 will load after 30 per cent since the software update. The software says that it is up-to-date (10.01). Nobody knows how to solve this problem, until Apple makes in the next update?

    Hello

    Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo

    It may take 30 seconds

    See you soon

    Brian

  • Windows 7 will not activate after a hard drive failure

    I tried the phone activation option and it will not work. IM assuming that it's because I reinstalled windows once before, the upgrade from 32 bit to 64 bit. Im not sure what to do and id prefer not to buy another copy of windows. My computer specs are as follows:

    OS: Windows 7 Home Premium
    Motherboard: Asrock Z77 Extreme 4
    CPU: Intel Core-i5 3570 k
    GPU: NVIDIA EVGA GeForce GTX 560 Ti
    Help, please! Thank you!

    Use the phone activation:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • My Satellite will not start after installing Vista updates

    My Toshiba satellite laptop does not start after the installation of updates. I get the Toshiba screen, then a screen that gives me two options. Start windows normally or repair windows. I tried both but you just Tousez in circles to the same screen.

    I didn't have any rescue CD or save a Vista CD with my computer

    Can someone help me. Do you have ideas how to run again.

    Thank you very much
    Christine

    Hello Christine

    Can you please tell us which laptop model you have?
    Did you start your laptop with F8?
    What happens when you click Repair option?

    Please give us more information.

  • Windows 8 will not activate after Windows 8 PC Refresh? Help, please?

    We recently got a new windows PC 8, we had some network problems, so we have refreshed the PC to the factory settings. When he returned, he said he had to turn on PC, of course we do not have a key to use, as the laptop came with windows 8 on it. When I go to activate windows in the settings, it says: "error not found Activation Description." I don't have any idea what to do. When I try the thing ' Slui.exe 4' they ask me for the things of this ID, which, of course, I didn't, because it says not found description of ideas?

    Hey Asim,

    I'm sorry to know that you can not activate Windows.

    1. don't you get an error message when you try to activate?

    2. don't you refresh, Reset or any other hardware or software fact replaces the PC before the show?

    Follow these items to solve problems on the issue.
    Why can't I activate Windows?
    http://Windows.Microsoft.com/en-us/Windows-8/why-activate-Windows

    Get help with activation errors

    http://Windows.Microsoft.com/en-in/Windows-8/activation-errors

    Kindly, answer us with more information to help more.

Maybe you are looking for

  • My iPhone 6 is stuck/not turn on?

    Good evening I keep my business and check out my Instagram, when all of a sudden, I got a text message. I try to open my text message by touching the notification (which still works), but this time, it would not have worked at all. I was very confuse

  • not able to uninstall Assistant support hp in hp pavilion g6 1301tx with windows7 64 bit os

    I have a little problem with my computer pavilion laptop g6 1301tx. I installed the new version of the hp support assistant in my lappy and it worked for a few days. One day, when I want to use assistant suport that it does not work and one assistant

  • Upward in 2.1, the data is lost in updating to 2.3

    It is obligatory to lose backup while improving to 2.1 to 2.3. Its really big big disappointing aspect of the update. No care is taken by google even to restore sbf type save by putting support software in the market. I want to restore some of sms im

  • Precision 690 MY171 rev A00 mobo - hearts Xeon 5300 series

    Hello I know that this subject has been discussed in the past, but I am having a hard time finding an answer for my exact situation.  My Dell Precision 690 runs the rev MY171 A00 motherboard on rev A08 bios.  It currently has a single processor dual

  • PIX

    One of our clients want to deploy PIX firewalls in their network. PIX firewall is apropriate for three interface. They require the Pix Firewall with three interface. Please help me. Ishwar