iPad 9.7 enough hot Pro

Unboxed a new iPad 9.7 Pro about an hour ago. When you hold it in portrait mode, the right side of the bottom of the iPad feels much hotter than the other sections. Others know about this?

The general rule about the devices and the heat is, if it is too hot to the touch or hold comfortably, then something is probably wrong.

All devices generate heat, some more than others. As the iPad is a waterproof device, it's the cooling is done through the envelope in aluminium (think it's a huge heat sink). Certain areas of the iPad become warmer than others.

As I said, if it's too hot to hold comfortably or you feel something wrong with it, make an Apple Store, that she be evaluated and possibly replaced if it is defective (chances are that it is not).

Tags: iPad

Similar Questions

  • I can't update iPad iOS 9.3.2 Pro 9.7

    I have an iPad 9.7 Pro who gave me an error message "could not verify update.» No internet connection "when initially attempted to upgrade to iOS 9.3.2. (my iPad 12,9 Pro did the same thing so I changed networks and finally it updated finally 2 weeks ago) since I tried the update via iTunes on MacBook Pro, removing the download storage iPad and reconnecting to iTunes, reset the network settings, do a soft reset of the iPad, returning up to MacBook then set up in the new iPad and still displays the number 1 next to general in Community > software. But the macbook and iPad still say iOS 9.3.1 is last version. So if anyone has any suggestions I could use the help. Thanks in advance for your time.

    The update for iPad 9.7 Pro was removed by Apple, shortly after he was released due to some problems with it bricking some of them (the only solution: they had to be replaced).

    So, do not try to update yours - it may or may not work; just wait for a new update to Apple. Other iDevices are not affected.

    If your ipad 9.7 Pro automatically downloaded the update before Apple pulls, just delete - do not install.

  • iPad locking/unlocking function of Pro

    I have an iPad Pro when I go into settings > general, the Lock/Unlock function is not here, but I have this function in my iPad Air. Please help how I can get this problem resolved?

    See previous discussion: there is no option to lock/unlock in setting/General in my new iPad 9.7 pro. How to obtain?

  • Works very well with the iPad, stutters badly with Macbook Pro

    Work fine with the iPad but stutters badly when using Macbook Pro OSX Version 10.11.4 El Capitan

    We need more in detail here, please.

    I'm assuming that you are referring to AirPlay of these devices. You are AirPlaying video, music or using mirroring of the screen?

    If you are mirrored, others may comment on OS X settings to make this work.

  • MacBook Pro will not load iPad Pro

    I have a new iPad Pro.  It seems that my MacBook Pro (retina, mid-2012) is unable to load the iPad Pro.  I see in the iPad Pro (lightning) loading symbol indicating that he is in charge, but the percentage of the battery declines nonetheless.  If I plug the iPad Pro into the power adapter provided with it (or even in a power supply iPad 1) then it costs.

    My MacBook Pro is able to charge iPad Pro?

    Thank you!

    Correct, and it has been so for all iPads.  The output power of the USB port on the computer is not enough to fuel the iPad in use and load it.  Apple has always recommended using the power that comes with the iPad to recharge it as it's output is higher than a standard edge computer USB port

    The smaller models of iPad (and maybe even the Pro, I have not tried) fresh peut leave a port of the computer if left in mode 'sleep' all connected, but even in this case, the charge rate will be much slower than if using the iPad Pro 12W power supply.

  • You can use display target with ipad pro?

    I was wondering if I can use my my iMac 27 "as the display of the target using my new 12.9" iPad pro?

    I would use my iPad as a Wacom tablet pro connected to my iMac when you work with my graphics programs.

    Thanks in advance

    target to display https://support.apple.com/en-us/HT204592this works with the Mac

    There are third-party applications that allow you to use an ios device as a second monitor in app store like air show or the stylus from the air and I'm sure a lot of other

  • How can I get iPad pro in Myanmar?

    IPad is available in Myanmar pro? It works with Telenor?

    Visit this link:

    Support for supplier of mobile phones and features for iPhone in Asia-Pacific - Apple Support

    It seems that it is supported in your country but not your carrier.

  • bug SmartKeyboard Pro iPad remains

    My Smart keyboard is connected and active. But I would like to insert special characters that are normally using the software keyboards´ ".? 123 "key, including the symbols of the § and €.

    The first page of the iPad keyboard support pages Smart Pro suggests that all I have to do is press the planet on the keyboard - but it isn't so: all that happens here is that the toggle between the active keyboard and emoticons pop up menu.

    I logged this problem with the support of Apple in December, but even with the IOS 9.2.1 update bug remains. Suggestions for this rather simple problem over there please...?

    Lars T. wrote:

    I would like to insert special characters that are normally using the software keyboards´ ".? 123 "key, including the symbols of the § and €.

    To make these characters via an external keyboard on an ipad you would normally use the same procedure on a laptop or desktop, press the shift keys, option or option + shift over another.  The one who depends on the language of your keyboard.  For the USA, you get § via the option-6 and € via option-shift-2.

    What language keyboard that you normally use?

  • problem of sliding iPad Pro Control Center.

    I can't always drag up the control center with my new iPad (always within 14 days) Pro. This happens only in portrait mode and only over the side of the "home" button (if I rotate it 180degrees it works fine, but then the notification Center does not work on the side of the "home" button.)

    After a hard reset, it started to work again, only to stop a few minutes. Initially, I bought he kept not only work in certain applications (http://bit.ly/joc0zm and Safari) but now it seems stop working everywhere.

    Someone at - it; She has known/fixed this? I guess it was a hardware problem, if it wasn't for the fact that a reset can fix it for a while.

    I have the same problem.  When the control center will not slide up, the notification Center also didn't slide once down.  Any solution?

  • Sync between iPad & Apple Pro problems

    My first, 'Modern', produces Apple I bought, in 2013, was a 64 Gig iPad. At that time, I had pre-ordered a 12 Core Mac Pro. Until this generation, I bought my 1st iPhone (5s) - but I had to use my old PC, with a "PC Version ' iTunes, for synchronization between PC iTunes & my iPad. Each, my iPad will never sync with my iTunes on my Mac Pro - because, by default, it is still waiting for my old PC to synchronize with.

    On my iPad, it's 'general tab' and to the 'Wi-Fi Sync iTunes button - it says:

    "Sync will resume when ___1 is available [my old PC]...".

    _______1

    Apps, movies, Podcasts and tones

    Last synchronization: Sunday 21 April 2013 at 17:37

    A few months ago, I took my iPhone, iPad, & my Apple Pro HD - to the closest Apple Genius Bar & Apple Store - looking for a solution to this problem. They have migrated data between all 3 devices, but when I got home - it's the same old song...

    How do I remove the old PC default address so my iPad will recognize my Apple Pro, and ignore my put discarded PC?

    Best regards, Keechiman

    You can synchronize only with a computer. To move computers

    Synchronization to a 'New' computer or replacing a hard drive "crashed": Apple Support communities

    If all the media synchronized music and apps are already in the iTunes library of the new just backup on iTunes computer and restore from this backup.

    iOS: backup and restore your device iOS with iCloud or iTunes

  • How to connect an iPad to a Deskjet Pro 8500 has more

    I'm unable to connect my Apple iPad for the wireless Deskjet Pro 8500 has more. I'd appreciate advice and recommendations.

    Yes I am quoting an Officejet Pro 8500 has more e-All-in-One

  • My ipad 3 has stopped communicating with my airport extreme.

    My ipad 3 has stopped communicating with my airport extreme.  I rebooted, both so that made a network reset on the ipad.  He sees the airport but does not connect.  It will work on the personal hotspot on my phone.

    Hello

    If your ipad works with a hot spot that's the Aiirport is the problem

    Go to the Apple Web site

    support. Apple.com

    You may need a software update for airport how old is this do you have another

    Router, you can try?

    See you soon

    Brian

  • iPad mini - responsive staff keeps

    Mini finished the software update IOS 9.3.5 this morning

    Mini iPad doesn't have a wifi only cell option.

    IPad to connect to "personal Hot Spot" keeps pointing to my iphone.

    I don't want the IPad to never use my iPhone as a personal hot spot and marked as inactive on my iPhone.

    However, the ipad continues to show my "personal Hot Spot" pointing to my phone in option.

    I had this problem in the past and found a solution, but of course, I don't remember.

    I did a reset and reset all the networks, on the IPad, but the "Personal Hot Spot' returns without option.

    Personal hotspot is disabled on my IPhone.

    Any ideas how to remove option "personal Hot Spot"?

    Thank you!

    You see an option to forget "Personal Hotspot" network (WiFi - settings)?

  • verticle display orientation portrait of the ipad on a screen of 27 "love at first sight

    We are creating a library-offer an internet point to display multiple pages of a website in the best possible way. These pages are long and better suited to portrait view. Us have an impact of lightning 27 "display and could use an ipad anyway. I am currently looking to somewhat expensive ipad mini w/cell on the amazon warehouse MD540LL/A and MD537LL/A model numbers.

    The first question is (with a screen designed to turn base), understand that this view portrait; the ipad will be enough for the display of the portrait of websites and surf?

    The second question is, will I get the best resolution in this way?

    I understand a lot of resolutions orientation landscape for various applications, but not him did not do anything with a monitor in portrait mode.

    Thank you!

    Hello. You hope to connect the iPad to the screen? It will be a little tricky. Apple has an audio/video adapter, but it is more designed for video playback on a screen. You then need to AirPlay would reflect the screen of the iPad, which may not give the best resolution. Also, I'm not sure of the rotation of the screen to portrait orientation. I have what is normally managed by a computer interface. You must borrow an iPad and experiment with this configuration before committing. A low-cost Mac could better serve you.

  • Broken screen to excite Pro

    Hello

    I have one hot pro. The front screen is cracked (glass only not LCD). Anyone know if it is possible to have this problem? Or if not where can I buy a replacement scanner to fit me?

    I looked on ebay and amazon but you can't see scanners for the Pure template - would this work on the pro at all.

    It was a gift for my son, any advice would be really appreciated.

    Best regards

    Excite Pro (AT10LE-A) and seems to excite Pure (AT10-A-104) in support of the same size of 10.1 screen but I don't very well if the two supports exactly the same digitizer of m.

    However, I found a www.realviewlcd.com page where that digitizer for AT10LE-A could be ordered.

Maybe you are looking for

  • Re: Satellite L300D-800 - specific settings for Windows 7?

    Hi This is unrelated to my previous post. I installed Windows 7 on this Vista laptop and it's a great software. But I think that Toshiba settings are missing which is the cause of overheating and shuts down. Can I do to prevent it from overheating? T

  • NB200 w/Atheros AR9285 - extremely low signal wireless

    I have bo9ught a laptop computer mini nb200 with Windows XP SP3 a year ago and I've always had a very weak signal (1 bar) wireless, but I blamed the router, I had. But recently I changed my router (EDIMAX BR-6204Wg) and a friend brought another lapto

  • copy main typedef not found

    Hi all I posted this question in the LabVIEW forum, but I guess that maybe the teststand discussion forum should be better, so I'm now posting here. I have a problem with my typedefine (Teststand UI Data.ctl) in the UI (derived from the interface cha

  • While loops and event structures

    Is there a problem using more then one While loop with an internal structure of the event, in a single VI? In my (only a partially attached printscreen) VI there is more then 2 all in curls with a structure internal even who controls a different devi

  • Write to serial with VISA

    Hello everyone, I am now looking for some time to solve my problem, but I couldn't find anything by working for me. I try for the first time to implement a communication series through the VISA screws to my arduino uno card. I was following the most