iPad black screen after turning on the voiceover

Similar Questions

• Ipad black screen after updating ios 9.2 2 mini

  Hi all

  My mini ipad 2 was somewhere in the update to ios 9.2 and when I tried to unlock it, it did not.

  I got a black screen, I thought that maybe battery or something.

  After the cable, I hear the sound of connect 'dived', so he is still alive.

  Then every 5-10 seconds who even connect sound repeats.

  So I tried the following:

  -Home and power button, connect to itunes-> restore

  -Home and power button, connect to itunes-> update

  -Home and power button, connect to itunes->-> tried restoring back to 9.1-> causes error 3194

  So, I tried all of the obvious ways to get the ipad back alive again, but I still have a black screen and the sound of connection.

  What to do?

  See the following support article on error 3194. https://support.Apple.com/en-us/HT201442

  -AJ

• Windows 8 black screen after Login or the wake from sleep / hibernate and flickering screen

  Hello

  I have something of a nightmare with my desktop computer running Windows 8 x 64.

  I did a bit of cleaning, unplug all cables, etc. and then reconnected everything later.

  Since then, I've known the following questions: -.

  After starting and going through the connection, I am faced with a black screen.  The monitor turns on, but there is no pointer.  However, if I clicked at random, it would open a Windows App out of the splash screen, which would then become visible.  If I moved the mouse to the bottom left, to get the splash screen, he would immediately go black screen on me.  He seemed to be refusing to display the splash screen.

  With "display" black screen, I found I could get the Task Manager (Ctrl, Alt, Del) upward and there could access the desktop.  It would then execute as usual, but if I let it go into hibernation or even just having the power of the screen down, it would be black screen again, and I have to use the 'trick' Task Manager to retrieve the desktop computer.

  Sometimes, using the Manager tasks does not always, because he'll sweep between the black screen and the desktop, alternating every 5-6 seconds.  I found through the process from the Task Manager, it stops doing this.

  Now, I did a Windows 8 regenerate, without any change in the problems.  I made sure the AMD drivers have been completely updated (they were) and also physically checked all cables and cables are properly connected and the GPU / RAM etc are properly placed.

  There is no error message displayed at any time. I have also disabled Fast Boot, nothing helps.

  I examined a faulty monitor, but it worked fine for an hour or two at a time, until I got let go sleep or put into hibernation, and I'm at square one.  It would of course be a faulty GPU, or even a PSU failure, but I'm not convinced the symptoms are pointing to them.

  For me, the fact it does not display the Windows 8 start screen after that Login or Wake Up is important.  It makes me think that Windows may interfere with the display in some way?

  I can, if necessary, provide DXDIAG etc, and I "m hoping someone will have an idea of what goes wrong.  I have spent ages going through Google and others, but cannot find a solution to my problem.

  Thanks for any help or suggestion you may have.

  Conrad.

  It solved!  Traded my monitor cable and all problems solved.  Guess he had a break or something in one of the lines.

  Thanks anyway.

• Black screen after restart of the Bootcamp Assistant

  Hello

  I understand that 10 Windows is not supported with the MBP Late 2011 officially by Apple, I have it working earlier today and had no problems at all. I tried to add another partition for windows side so that I would be able to install Deep Freeze on Windows have a clean install of Windows every time that I boot in there and have all my programs and files on what would have been called "Local D.

  I deleted the Windows partition and I deleted the first player who had only 200 MB normally created from windows which I believe that holds the MBR for the old Windows Installer install. I tried to create 2 different partitions in disk utility and that the load bootcamp. He said well obviously not, because the reader must be around to do this, I did the road together again, put my Windows 10 disc in and let bootcamp.

  I wanted the reader to have 51 GB of bootcamp, that I would use 300 GB for the 'Local D' drive and the rest of the SSD 1 TB drive, I got OS X El Capitan. If at this point, I have X amount of GB to OS X and 51 GB will be used so that the wizard has done for me, once the wizard bootcamp is made, it will restart OS X and brings me to a gray screen. Normally, it's just going to continue in the installation of Windows, but it takes me to a black screen and does nothing else. Is this by far where can I fix? I even tried simply to launch the installation of Windows Installer directly from the drive itself without going through installation of bootcamp by holding ALT and selecting the drive and he finally took to the installation without any problem and now it goes to a black screen and does not change even.

  And for those wondering, no I do not get a flashing cursor in the upper left corner of my screen. Its completely black.

  PerfectStory wrote:

  I deleted the Windows partition and I deleted the first player who had only 200 MB normally created from windows which I believe that holds the MBR for the old Windows Installer install.

  You have deleted the EFI Partition from Mac. Not a very good idea. She does not hold the MBR. Your Mac uses a hybrid MBR. The MBR and the boot for Windows Manager are two separate entities.

  I tried to create 2 different partitions in disk utility and that the load bootcamp. He said well obviously not, because the reader must be around to do this, I did the road together again, put my Windows 10 disc in and let bootcamp.

  Disk utility is now considered an invalid drive due to a missing EFI partition. How did you again the reader "XV"? If you start from W10 in the optical drive, it is no Bootcamp involved more.

  I wanted the reader to have 51 GB of bootcamp, that I would use 300 GB for the 'Local D' drive and the rest of the SSD 1 TB drive, I got OS X El Capitan. If at this point, I have X amount of GB to OS X and 51 GB will be used so that the wizard has done for me, once the wizard bootcamp is made, it will restart OS X and brings me to a gray screen. Normally, it's just going to continue in the installation of Windows, but it takes me to a black screen and does nothing else. Is this by far where can I fix? I even tried simply to launch the installation of Windows Installer directly from the drive itself without going through installation of bootcamp by holding ALT and selecting the drive and he finally took to the installation without any problem and now it goes to a black screen and does not change even.

  And for those wondering, no I do not get a flashing cursor in the upper left corner of my screen. Its completely black.

  Please after the release of the following Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Black screen after restart, and the machine to sign

  Send a message to PC-cillan virus my conputer he loses her, so I rebooted it. When he returned to the top of the screen Dell came and then I got floppy diskette seek failure. Strike F1 to continue. I do and it takes a black screen, and the computer is still on Windows does not come to the top or even try. Ive tried F12 and I cannot get into safe mode that brings back me to black screen. It gives me the same symptoms as the BSOD but no cursor.

  Hi jhintense,

  As the virus is running on the computer, we recommend that you first of all allows you to remove the virus from your computer. To do this, you might consider contacting the provider of security software.

  Try these steps and check if your computer starts on the desktop.
  Step 1: Try the last known good configuration
  a. start your computer and press the F8 key continuously to see the menu advanced startup options.
  b. in the menu, select last known good configuration, and press to enter.
  c. see if the system will load very well.

  Step 2: Disable the Floppy drive in the BIOS (Basic input/output system)
  a. start your computer and press DELETE continuously on the screen of the BIOS see.
  b. turn off the power or turn off the disk and save the settings.
  c. restart the computer and check if Windows loads very well.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black screen after logging into the domain account

  OK, it's making me nutty and I don't know what to do.

  Configuration: SB Server 2008 running domain controller.  4 client machines connected, 2 XP, 2 running Vista Ultimate SP1.  XP machines work fine (of course).  Vista machines are in the tank.
  Two Vista machines are about 2 weeks with the only changes to the installation of the factory Office, Norton 360 and printer drivers.  Both machines exhibit the same symptoms at the same time:
  (1) after the restart, each machine running Vista for 10 minutes exactly, saying "Please wait...". "before the screen"press Control-Alt-Delete.  Safe Mode boot normally.  Examine the event log, I see entries on running a startup script of some kind that took 600 seconds (10 minutes).  This of course comes from the domain controller.  What is this and how do I get rid of him?
  (2) after finally journaling, tries to connect the domain account ("domain\username") result in a "Welcome" screen... ', followed by a black screen with a mouse cursor which is mobile.  It is a permanent condition.  I let the machine sit overnight and nothing changes.  I get an occasional popup on the black screen of Norton saying it runs background tasks and that's all, so I know the machines are running.  Pressing Ctrl-alt-delete is * not * bring up the Security screen.  It doesn't do anything.
  Note that connect to a * local * account ("machinename\name") works very well.  I have a desktop, icons, everything.  I even connected locally and made a "change user" to a domain account, and now the machine is stuck again to a black screen with mobile mouse.
  Both machines have worked very well for two weeks.  When I reboot safe mode and remove the computer domain, everything works well, probably because I'm just connect to a local account again.
  I did * no. * change to group policy.  The server works with all settings by default wrt updates, etc.  I did not have any mods system to customers other than to join them to the domain.
  I searched online, and I see other people have this problem, but I can't find a definitive solution.  I tried to restart by using the last known good configuration, but I think that the system is of the opinion that the last logon was successful, which is not good.  To return to the last restore Point is not good.  Both machines has stagnated at the same time, which implies a problem across the field.
  Please don't tell me that I have to spend $200 and one day online with technical support to get an answer to this.
  Thanks in advance for any help you can provide.
  -Rob
  2)

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Thank you for visiting the website of Microsoft Windows Vista Community.  The question you have posted is related to Small Business Server and would be better suited to the Small Business Server community.  Please visit the link below to find a community that will provide the support you want.

  SBS 2008

  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black screen after turning on computer for Vista...

  Once I turn on the computer, a black screen will appear with no mouse cursor or anything. I tried several troubleshooting steps, and none of them work, including the use of Vista OS disk. I don't know what else to do. Does anyone have a solution to this problem?

  Do you get the normal splash Screen with Dell, HP, Logo etc?

  If absolutely nothing comes to power, you have a hardware problem.

  Mick Murphy - Microsoft partner

• Black screen after installation of the Agent from the view.

  Hello

  I am facing a weird problem on my windows 8.1.

  I have install for use as a template for a pool automated view 5.1

  When I install the vmtools, after that I installed the agent of sight, I got a black screen.

  I tried several times and I got the same thing.

  I'm not able to convert into a model of deployment of workstations after.

  Can you please help me on this problem.

  Thank you in advance.

  I'm a little unclear - which command do you have installed? If you have installed VMware Tools after the Agent of the view, you need to uninstall and re-install the Agent of the view... It must ALWAYS be installed last, even if you're just updating tools.

  In addition, Windows 8.1 is not supported with view 5.1 IIRC

• HP 15-f039wm Notebook PC: black screen after login in the 8.1 window

  Once connected, the screen goes black, with only the visible mouse. I can run programs through task manager and the computer works normally until after I connect. I would like to know if this can be corrected as soon as possible because I need a computer for school.

  Hello:
  
  Follow this web document of HP to the useful address:
  http://support.HP.com/us-en/document/c04572861
  
  Or suggestion of David here:
  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-X2-PC-goes-black-after-logging-in/m-p/4897895#M67690
  
  Concerning
  
  Visruth

• HP xw8400: HP xw8400: black screen after you add the Bios password

  
  

  Remove the password bios reset jumper on the motherboard and reset the bios/cmos solved the problem.

  Hope this helps someone else.

• After turning on the computer, the screen stays black

  original title: fix a black screen

  After turning on the computer, the screen stays black

  It could be that your video settings have been set to a resolution that your monitor does not support.

  You can start mode (repeatedly tap the F8 key during startup key) safe?  Safe mode requires a video resolution supported by all monitors.  If it works, try to change your video resolution settings
  (Control Panel-> display-> (tab) settings.

  HTH,
  JW

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• Vista - Error Code: 0XC000000D (black screen after the installation of update)

  Original title: blocked Vista patch

  Patch Vista landed on black screen

  message on the screen

  "0xc000000d" registry/40015/55341 (thing)

  It's the August updates, sorry I have no idea who would be KB. This is on a Dell Latitude D630 laptop. Auto repair did not work and States that there is in a slump.

  Any help in this would be very appreciated

  Hi RickL123,

  What is you receive the exact error message?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: start the computer in last good known Configuration (and also in safe mode). To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the boot advanced options, select last good known Configuration-Safe Mode

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 3: You can follow the steps mentioned in the article below, which deals with a similar question

   

  Your computer may freeze or it may restart to a black screen that has an 0xc0000034 error message after you install a service pack for Windows Vista

  http://support.Microsoft.com/kb/975484

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black screen after the attempt to upgrade to windows 10

  I was trying to upgrade windows 7 on a laptop HP Windows 10. The first attempt was via the white windows logo in the taskbar. This attempt was interrupted, probably accidentally turned off the button wifi trying to move the computer. The second time I tried to use windows ten upgraded Installer. I did the usual download and installed up to 99%. He remained on the installation of 99% during the night and the next morning without change. I turned off the computer and he made a series of updates before shutting down for good. When it starts again, it has a black screen but the cursor is there and movable. I tried in safe mode for the repair and restoration of the system, but it did not work. I tried to reset the BIOS to default, but does not. I try to leave the computer turned off for an extended period of time disconnected from the internet to see if that helps. The last attempt to start, windows 7 seems to start but then ends up on the black screen and I held down the power button to stop it. I'd rather upgrade to windows 10 if possible, but if cannot then if can go back to windows 7 will be enough. It worked great on Windows 7 before trying to upgrade, so there is no problems with the computer.

  Hi Chris,

  I'll be happy to help you with the problem you have with black screen.

  The problem may occur if the video drivers are not updated.

  What is the model of your HP computer?

  I suggest you follow the suggestions by Sharath Srinivasan replied on August 7, 2015, the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Please reply with the results, we are happy to help you.

  Thank you.