IPad cables

Is there a power cable IPad that plug into the wall as usual, but is responsible to cut once the IPad?

No, there is no such cable.

Tags: iPad

Similar Questions

  • Problems loading of the ipad. When you insert the charging cable, it must be at a certain angle to recharge.

    When you try to load the mini ipad cable must be in a particular angle to register as a load.  This area can be changed?

    Take a flashlight and if possible a magnifying glass and control lightning port on the iPad. See if there is any dirt, debris, lint etc in the port which could impact on insertion of the plug of the lightning. Otherwise, you can take a date-Genius Bar at the Apple store near having examined material. Be sure to bring the cable with you as well.

  • How do I change the Speedgrade screen size?

    Can someone tell me how to change the size of the screen in Speedgrade? I can move the lower panel from top to bottom, but I can't understand how to do the program monitor either larger so I can actually see what I do to the image without making it full-screen.

    Screen Shot 2016-03-05 at 2.42.11 PM.png

    Yes, you go the small signs and you can make it bigger or smaller. This is the problem, you are using this on a laptop? It is almost impossible to for use on a portable computer or it looks like the image you posted, when I use it on a laptop, I enter my settings on the retina of macbook screen and increase the resolution which makes it any smaller, but makes manageable Speedgrade. But even in this case, the page layout is horrible for a laptop or a low resolution monitor.

    On my monitor Apple I plug my laptop too, it looks perfect, the video is big enough, while seeing the wheels of color etc. I also sometimes use a second display, you can have the video on the second screen and tools to the screen you want. I haven't used a second ordinary screen longer, I use an app that makes my iPad Pro in a second 13-inch retina display screen. So I can see the video by 13 inches, if necessary, and I do with my iPad Pro if I never had to change it on your laptop again for sure.

    If you have only a laptop or low screen resolution, if you have a Tablet, even if is not 13 inches of fat, you can use the tablet to display the video. It will cost about $ 20 for the pair of the app. I keep pugged in via the iPad cable and there is no latency or delay time.

    If you don't have an iPad, I think seriously about doing a 27 inch or larger screen, even if you don't have a desktop computer, you can plug the macbook inside. I do not own a desktop computer, it's just my laptop at home is always connected to a screen. You need not what anyone who has wanted to get fairly accurate colors. IPS 27 inch 2650 x 1440 will work.

    If you have a Macbook, the retina, although it has higher than this monitor specifications, it double the pixels and makes it look like 1400 x 800 or something like that. For a workspace it takes more like 2560 x 1440, however on a laptop which might make things if small you cannot see them.

  • How to connect an external device via an Ethernet cable with iPad Air?

    I need to connet to my iPad, a digital mixing console THE Behringer X Air xr18.

    LLA WiFi connection e/s is not overall durin live so I need to use the Ethernet cable.

    You can not unless someone makes a dongle, but even in this case an application had to talk with the dongle do not believe that a dongle could add something like kernel as a new network interface which could access normal applications

  • iOS10 update; iPad 2 Air not USB load with certified Amazon lightning cable

    iPad 2 Air and iOS 10: been using an Amazon certified cable lighting to load and iTunes connect via the USB port of > 1 year without any problem. Updated to iOS 10, now the certified cable doesn't load a USB port. It always connects to iTunes, but the sign of the battery flashes the fresh green symbol for 1 second then said stops and says 'no charge '. Tried on 2 USBs and 2 PC with the same result. Tried another brand cable via USB and it costs.

    When I plug this cable from Amazon in the wall charger, it will load. Seems to be something with the iOS10 not recognize the USB load now on this certified cable. I didn't call Apple support on that too, they have no idea what's going on. Their answer is to use an Apple cable of course. Any help is appreciated.

    The cable of the Amazon is located here:

    https://www.Amazon.com/DP/B010U3XVMU/ref=cm_cr_ryp_prd_ttl_sol_0

    It seems there is no real solution beyond using another cable. There were a few people with this problem since iOS10 came out, so it's likely Apple changed something in the settings. As they changed it, it's either a mistake which will mysteriously set with the next update or it's going to be permanent.

  • Connect mini iPad iPhone 4 5 s using a cable

    I currently use the hotspot on my iPhone 5s so that my mini iPad 4 can connect to the internet while I'm out of the game Pokémon Go. I get a message on the iPad indicating "signal GPS not found." quite often. The battery on the iPad lasts longer then the iPhone while using the Pokémon Go app. Is it possible to connect the iPad to the iPhone using a cable and I hope that allowing the app on iPad to use the GPS signal on the iPhone without this stall?

    Simply: No.

  • I have a problem loading with my iPad Air2.  I used other cables and Chargers but still doesn't load.  I plugged the iPad to iTunes and a DFU after he took a few hours that the iPad has been completely restored and apps reloaded.  In addition to the

    My iPad will not normally charge.  I tried different cables and Chargers.  I plugged the iPad to iTunes and reset a DFU.  After only a few hours the iPad finished reloading all software and reloaded new apps, it had also charged the battery but the problem remains, I still can't load the iPad normally.  Any help out there?

    There are very few things that keep loading an iPad. Some of these (other charger plugged into a good outlet, different cable) you have already tried. Others are:

    1 dirt, lint or fuzz in the port of loading of the charger or the iPad. Check and clean carefully if necessary.

    2. a software failure. Reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

    3. failure. Make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

  • This cable or accessory is not certified and may not work reliably with this iPad.

    I get the following message: "this cable or accessory is not certified and may not work reliably with this iPad." Oh, and the message repeats every so often. At first, I thought maybe would it be the earbuds, but I get the message, even though no headphones are attached. I get the message when no cable is attached. This occurs even if no cable is fixed. A hypothesis as to what is happening there?

    < re-titled by host >

    These alerts can appear for several reasons: the cable is defective, damaged or may not be certified by Apple, or your device might have an accumulation of dirt or damage. Follow these steps:

    Before you try the following steps, make sure that the USB cable and your port is clean!

    1. Restart your iOS device.
    2. Try a different cable certified by Apple or a charger.
    3. Make sure you have the latest version of iOS.
    4. Contact Apple support to implement the service.

    I hope that you will charge your iPad in no time!

  • Does not recognize iPad Mini Flash 'female' connector cable

    Cannot load my Ipad Mini.  Tried to load it with three Apple different lightning charge connector cords.   Well all worked until today.  Seems that the female end of the connection does not recognize the plug more.  Misfortune.

    If you are referring to the port on the iPad Mini, I suggest that you use a flashlight and magnifying glass and see if you find any dirt, debris, fluff, etc... Those who can prevent good contact with the cable of the lightning. You can use a small wooden toothpick or a small dry toothbrush to clean, and then try again. If you still have a problem, then make an appointment at the Genius Bar to the nearest Apple Store to have the Unit looked at.

  • Screen displays a logo of cable and lightning iTunes trying to charge iPad 4

    4 iPad has a black screen for months, and I was ready to trash. Just connected to try to charge the battery completely died and my screen turned on and now shows

    an image of the cable lightning pointing to an iTunes logo in the center of the screen.  What it means is to accept a charge?

    He asked to be connected to a computer running iTunes

  • I want to reset iPad photos so it clones my iMac Photo Album via a cable. Get weird iPad 1/2 albums I don't want. How?

    Something weird is going on my iPad 2 aerial, with the remains and partial albums. I have always used a direct connection cable USB-lightning to synchronize. My iMac photo album is perfectly formed, sorted, etc. I want to have pictures of my iPad to wipe all the photos, and then clone that I have on my pictures to the iMac. No muss, no fuss.

    Then go ahead, I want both of them to sync.

    I've tried enabling iPad iTunes > Photos > synchronize Photos (both TOGETHER and SELECTED (with all selected).) I end up getting half of the albums, they aren't right key group, bad photo, etc.

    I already copied all the pictures I want from my iPad to my iMac, so I'm fine with losing everything that my iPad Photos has, as long as it takes all my iMac photos and on the copy material.

    Best way to do this?

    Latest versions of iOS and El Capitan.

    Bonus question. iPad Photos wants to import many (many) photos to Photos of the iMac. These images already exist. If I select all import them, is smart enough to go, synchronization "is a dup so I don't bother. Or I'm going w / duplicates ruin my iMac Photos? Having several hundred pictures showing whenever I have connect my iPad and then view it on my iMac annoys Photos app.

    Thank you very much!

    I'm sure that you know--he put the photos in iTunes and then sync them to iPad - not sure from Photos - Mac directly, works

    That said, I think I know that photos are stored with a specific tag, and if you import the same image twice, it will be stored again with another tag creates a duplicate

    If possible try with just an image and see what happens

    Also, if you don't want pictures opens automatically as soon as the connection of the iPad - there is a box at the top left which you can uncheck

  • I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

    I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

    Have you tried the Logitech support site?

  • IPad Air to TV HDMI cable connection problem

    I can watch the movie using YouTube even he inserted ads several times during playback in iPad Air. But when I connect iPad Air to the TV cable HDMI, the TV does not work after second played advertising time, the screen went black. I can continue to watch only, disconnect and reconnect the cable. How can I solve it? The iOS is 9.3.1.

    Hello HSIAO CHUN.

    If you experience problems connecting to your iPad Air to your TV via a digital AV adapter from Apple, the information described below can help to restore all the features to your configuration.

    If an application is no video display or read audio data

    The app is not compatible with the adapter. Check compatibility on the information page of the application in the App Store or contact the developer.

    If an alert says a HDCP compatible device

    Your content is not compatible with the adapter. Movies, series TV and video streaming applications require High-Bandwidth Digital Content Protection (HDCP). If you try to play these movies, shows and streaming videos using a connection digital non-HDCP - as the Apple VGA adapter - one alert will ask you for a HDCP compatible device.

    If you need help with other issues

    1. Disconnect, then reconnect your adapter on your iPhone, iPad or iPod touch and your TV, monitor or projector.
    2. Make sure that your VGA or HDMI cable works, given that the issue could be with the cable.
    3. Remove all cables extension VGA or HDMI or converters. Accessories that convert a VGA or HDMI signals to different video formats (DVI, Composite, Component) are not compatible.
    4. Make sure you have the latest version of iOS.
    5. Contact Apple support.

    On AV adapters digital Apple for iPhone, iPad and iPod touch
    https://support.Apple.com/en-us/HT202044

    All my best.

  • iPad connection cable 2 showing when downloading itunes

    I have Pad 2 connection cable when downloading I have tunes

    Do you mean the iPad displays the icon image and cable iTunes on its screen? If you do then the iPad went into recovery mode, you must connect the iPad to iTunes to your computer by cable and should allow you to reset the iPad and you can restore/resync your content

  • When I connect my Ipad or Iphone to my computer via a USB cable, I can open the storage folder without using a password. How can I avoid someone else do the same?

    When I connect my Ipad or Iphone to my computer via a USB cable, I can open the storage folder without using a password. How can I avoid someone else do the same?

    This storage folder are you referring? If you are referring to the film, what happens because you have accepted a trust between the iOS device and the computer. If the device has been connected to another computer, it must be unlocked and establish a relationship of trust as well. If you are referring to something different, please explain.

Maybe you are looking for

  • Memory Stick Pro DUO is not in my Satellite A200 - 1 H 2

    Laptop computer most I want to set up my Memory Stick Pro DUO inside the laptop, but not this one, it can t happen so I tried to put the Memory Stick Pro DUO in one of these adapter Memory Stick DUO that accompany it, and although it does not connect

  • Class 0 SMS

    Hi all We have an application that communicates with a server via SMS. Those who are sent by the server are class 0 SMS, aka SMSs. flash on mobile device Application treats them correctly, but they are always displayed to the user. Are there ways to

  • DVD will not play on the standalone DVD player

    DVD NOT PLAYON STAND ALONE DVD PLAYER HELLO, I JUST USED WINDOW MAKER DVD, MY COMPUTER IS ONLY TWO MONTHS OLD. THE DVD WILL NOT PLAY ON MY DVD PLAYER WHICH IS PUGGED IN MY TV. HE PLAYS ON THE COMPUTER AND TELEVISION WHICH HAS A DVD BUILT IN IT. Thank

  • SX20 bandwidth consumption

    Hello I want to know the bandwidth consumption when I use it with three other SX10 SX20 Multisite on MPLS (rate set to 512).

  • Microsoft Visual Studio Express 2012 is not install my windows 8

    Microsoft Visual Studio Express 2012 is not install my windows 8. If I click on the .exe file, it will show me this message.