iPad can't connect to the router

Similar Questions

• 9.3.4 disabled wifi on an Ipad, but it connects to the router. Just don't download at all

  IPad was working fine, but I've updated to 9.3.4. Now Wireless does not work. Shows connected to the router, but nothing happens, but say unable to connect to the server, error trying to access the internet or by mail. Also turn continuous flashing VPN gray to green, then again, but we have never set up a virtual private network. Don't know if it is connected. Have you tried

  1 disconnection / reconnection to 2 routers that work very well for other devices

  2 reset wireless via settings > general > reset > reset network settings and then hang up again

  3 airplane mode on, wait a few minutes, then shut off again

  Overall, the router will connect to any time, we put the password, but there is no transfer of data. 3 other devices work fine with the router. Don't know where to go from here, or if it is possible to back out from the upgrade. Anyone else having this problem? A research increase the same problem.

  Thank you

  Anything that causes the problem is not specifically 9.3.4, which fixes just a security breach. Have you tried to restart routers?

• Wrt54g and Wrt54gl configure WDS, but can't connect to the router

  I tried searching the web and this site but can't find the soluction. Please notify

  Here is the configuration, I installed wrt54gl with dd - wrt standard version running hotspotsystem.  3 wrt54g version 5 with dd - wrt micro configured as client WDS wrt54gl.  After the initial setup I can connect the main router wrt54gl (192.168.1.1) and all 3 routers WDS (192.168.1.2, 3 and 4), but after a few days of tests suddenly I can not connect to 2 WDS routers.

  I want to say I can connect and he will make me to internet but I can not login to stay, he says just the page takes too long to load.  I know that if I do a hard reset and the WDS installation program then it will work, but I don't want to keep doing.  Someone has an idea?  Tried power but cycle anyway, the router does not work.  What is the load on the router made inaccessible?  Any suggestion would be great!

  Ask a dd - wrt forum.

• Wii can not connect to the router

  Please HELP, can't connect to router wants have changed the password password several times guard commin back with security codes cannot connect to internet... Please someone help

  What is the wireless settings you have set up on your router (SSID, channel, Security Mode)? Try changing the security on your router to WEP or WPA Personal Mode and then check.

• Can not connect to the WiFi on MacMini 2014

  When I try to connect to any WiFi on my MacMini it says ' Unable to join, try to get closer the router. but the router is right next to my Macmini.

  In addition, my wifi connection is correct. It is easily connected to my iPad and iPhone.

  I tried transferring a file using release from my iPad to MacMini. It worked.

  When I tried to connect to the MacMini with ethernet cable, it worked too!

  The only problem is that I can't connect to the router using the wifi on my MacMini.

  What should I do?

  Try to create a new network location:

  Using network locations (Mac OS X 10.6 and later)-Apple Support

  Try to connect as a different user.

  Have you removed the Mini?

  AirDrop uses bluetooth

  http://iPad.about.com/od/iPad_Guide/SS/what-is-AirDrop-how-does-it-work.htm

• HP deskjet 3050 J610: printer connected to the router

  How can I connect my printer to my router using an iPad. I downloaded the HP print remote app. I don't have access to the router so can not use the WPS button.

  Hello

  You may not use the iPad to connect your printer to the router. You cannot access your router, then most likely you can not connect. The router comes from your neighbor's House? You must Access the printer or at least you have a computer that is connected to this router. If you want to print, direct wireless can help:

  http://WWW8.HP.com/au/en/campaigns/wireless-printing-Center/wireless-direct.html

  Kind regards.

• Unable to connect to the router (even after reset)

  I'm really frustrated, and I hope that this community can provide an answer. After all the hype around this router, it is he who gave me the most trouble.

  About a month and a half... completely randomly it seems to me, I could not connect to the router more. Not through intellectual property, routerlogin.net/com...nothing. It just says: cannot display the page. I did everything I could possibly think, tried all of the suggestions I could find here and elsewhere and still nothing would work.

  I finally did a hard reset and obviously lost all my settings... and RIGHT AFTER the hard reset after upgrading the firmware, I can't connect to the router again. This could be the cause? Is there a way around it?

  The router worked fine until about a month and half ago. Then I stopped being able to connect to the admin page. Several resets hard did nothing.

  I ended up RMA'ing it and the new replacement works fine (for now).

• Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

  I have problems to connect to any wireless internet - home, library, coffee shops.  He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

  Only connects to the network saying "local only".  And I'm lucky even get that much.  Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

  I use a HP G60 laptop (maybe?), I don't remember the model exactly.  Windows Vista.  I am frustrated beyond belief.  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  In summary: is it a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  This computer is not yet a year old, and already I am unable to use it for the internet.  Not very well I plug my ethernet cable router wireless in the library.  I bought a laptop for a reason, but it is on track to achieve more like a desktop.  Very disappointing.

  Someone, please help!

  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  Is this a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  Hello

  When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

  First step, log on to the HP support and download the latest drivers for your wireless card.

  The HPG60 is a very good phone but its wireless card has problems with old drivers.

  In which case it's a hardware problem, contact HP support.

  In general, you can use this process to find out what's wrong with the wireless.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• After update my iPad iOS 9.2.1 to 9.3 live 2 I can't connect to the activation server and does not have the latest version of iTunes to activate

  I downloaded the update to iOS over-the-air 9.3 and installed. Setup cannot connect to the server to activate the ipad2. The message is to try again in a few minutes or connect to iTunes to activate. Yes, I have the most recent and current iTunes version, so this isn't the issue. iTunes recognizes the iPad as my ipad2, but cannot do what he done to be able to use iTunes to activate it. I have 2 iPads. iPad 2 and iPad 4th generation. iPad 4th generation downloaded on-line and updated and active and install without problem. IPad2 updated and not can not connect to the server to activate and I connect to iTunes to activate as the message says, but iTunes cannot activate because it sees my ipad2 and that's all that. Of course, I'll try again once activate WiFi tomorrow but any suggestions would be greatly appreciated.

  Thand you

  same problem with you jerryenea. This seems to happen ipad 2 only? my itunes cannot check my ipad

• WUMC710 connected to the router, but can not see internet

  My media WUMC710 connector on my router Netgear Nighthawk AC1900 double band on the first try.  Can see the MAC address in the connected devices list when you are connected to the router.  However, the devices connected to the WUMC710 cannot connect to the internet.  Tried TV, Blue-Ray and laptop.  All other devices on the wireless network properly.

  What is the problem?

  Fixed a problem with the update of the firmware of the router.  WUMC710 works great!

• BEFSRU31 - connected to the router, but can not browse the internet.

  Hi, I had this problem in the last three months. I share a Linksys BEFSRU31 with my friend. However, once or twice a week, or even more frequently, the router suddenly ceases to send data to my computer. However, my roommate still receives data. So I'm unable to browse the internet even though I am connected to the router and the router gives me an IP address. The only solution I found to do this is to reset the router, which is annoying, because the router is in my friend's room and I don't like to disturb whenever this happens. The ISP is Optimum Online, and I'm on a cable connection 8 MBit. Can someone help me please this problem? Thank you for your time and your collaboration.

  Message edited by EvilBrownie on 18-01-200708:47 PM

  
  

• I can't connect to the net without being plugged in the router

  We just bought this HP dv6 - 6033cl and I can't connect to the net without being plugged in the router, can someone help us please

  Hello

  1. what exactly happens when you try to connect through wireless? Do you receive an error message?

  2. If it works well before?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps below and check if it helps

  Step 1: In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Step 2: If the problem persists, try uninstalling and reinstalling the Device Manager wireless connection,

  a. click Start, type Device Manager in the start search box and press ENTER.

  b. locate the network adapters and expand the same.

  c. Select the adapter, right click and select Uninstall.

  d. restart the computer, if prompted.

  Pilots should settle automatically after the computer restarts.

  More information: See here

  Wireless network card: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/Wireless-networking-frequently-asked-questions

  Hope this information is useful.

• My photosmart c309g-m is connected to the router by ethernet cable. Can I add?

  My photosmart c309g-m is connected to the router by ethernet cable.  Can I still add to e-print?

  Hello

  Is a printer ready ePrint? You can use the home router to access the internet? If Yes and Yes, then you should be able to do.

  Kind regards.

• I have my printer connected to my router via a usb cable... I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print on my prints through the router?

  I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?

  Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)

• Can CCNA configure DSL/PPPoE connection into the router?

  Let me know CCNA can configure DSL/PPPoE connection into the router?

  Thank you

  Hello

  Contents/chapters/review of CCNA certification change over the years almost on regular basis. What part of the CCNA it a few years ago could already be excluded. This applies to DSL technology. A few years ago, she was part of the CCNA (CCNA4 as subject WAN training programs) related, but this is no longer a part of CCNA.

  In summary CCNA certified person isn't ready for DSL PPPoE Configuration, as this isn't a part of existing CCNA reading preparation. But I hope that someone who asked the CCNA exam could be so clever, find the corresponding/HOWTO documentation on the internet and be ready for DSL and PPPoE configuration. It is not really difficult to implement that.

  And at the end - Yes, PPPoE for DSL by CLI configuration on router Cisco is the biggest challenge to do it on the simple one - goal with WebGUI DSL router, but I believe that a new set of commands related to this is not really too difficult to apply and understanding for CCNA certified users.