IPad can't drag, but screen work?

Similar Questions

• IPad displays no service but wifi works lack of 4 G

  I have a current AT & account T that I used for a few years and now my Ipad 2 says no Service. The device comes in my AT & T billing and my icloud account. After the upgrade to 9.3 all books and notes are missing as well. Help, please.

  I have this same problem.  I don't have a solution, but I managed to resume service.  Try going into settings, mobile data and turn off the power.  Turn off your iPad and leave approximately one minute.  Market back and turn it back on Mobile Data.  If all goes well it starts to search and find your connection.  If that doesn't work try to remove the sim card and restart and then put back sim in when he says no Sim. The new update 9.3 put in place by Apple today does not solve this problem, and in my opinion makes it more difficult to return to your service.

• ASUS VGA no signal. little black box but screen works fine

  Help. I have a VGA no signal on my screen. It's a small black box in the corner. My screen and the computer work fine. I just can't get rid of the little black box to the top in the corner that says that.

  Thanks for your reply. I can get it out of my screen. Simply press the wrong button when I turned off the screen and it works and it came. Everything works fine.

• Mini iPad can't drag or enter the access code

  My mini is broken, but I want to restore it.  Is it possible to do this when it will not allow a slide or a password?

  do a hard reset

  maintain the power and the "home" button until the apple logo appears

• Show contents of window while dragging doesn't work, XP Pro SP3

  The option to display transparent versions of file icons when they are dragged in a different window is no longer works in my XP Pro SP3 installation.  "Control Panel-> system-> Advanced-> Performance settings-> see the window contents while dragging" is selected and remains selected after restarts.  The HKEY_CURRENT_USER\Control Panel\Desktop\DragFullWindows registry entry is set to 1 and the remains after restart.  This is a Dell computer, but I have no Dell Multimedia Experience installed, which is not the problem because it's with a lot of people.

  This setting has worked for years on this machine and work stopped for no apparent reason a few days ago.  It works on another identical machine, which makes things even more strange.  What could possibly happen?  Thanks for any help you can give.

  In case anyone has the same problem and comes across this, I managed to solve this problem (and the infamous 100% of svchost CPU problem) by applying this fixit. I have no idea why this fixit has something to do with "show window content while dragging", but it worked.

  Moreover, this forum software is atrocious.  I can't mark my answer as the answer just because I wrote it?

• Office Air iPad darkens but I can still hear Siri and other screens work.

  iPad 32GB I can't get the air desktop.  I can hear Siri, but the screen is black.  I can get other screens via Safari but I can't access or see my apps.

  If Siri works, you should be able to use it to open other applications.

  Simple start try a reset. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait for your iPad to begin on its own.

  Then, try settings > General > reset > reset homescreen layout.

  Then try settings > General > reset > reset all settings. Make sure that you know you wifi password, you will need to re-enter this step.

  Next is to restore your iPad via iTunes on your computer. I don't have a computer so I can't help you on this one.

  When the screen is dark if you tap Siri tells you what you should see?

• Hi, I wanted to know if you can fix the apple screen clock. the clock works perfectly, but the glass broke and how mach

  Hi, I wanted to know if you can fix the apple screen clock. the clock works perfectly, but the glass broke and how much

  Hi Maxi

  Costs vary depending on your location and the model Apple Watch.

  Contact Apple support to establish your repair options, cost and likely delays:

  http://www.Apple.com/br/support/watch/contact/

• My TV screen works as a monitor, but I can't turn on my computer with the fact that it is my first choice

  Hey!

  I recently tried to hook up my TV to my office to use as a monitor, and it works! It's a VIZIO HDTV but I can not get the HDMI cable to fit all, so I'm just using a VGA cable!

  Graphics card is a Radeon 5800 series.

  My problem is that when my computer is turned off and the TV is plugged in, I can't get a good picture when I turn it on. The resolution is just terrible, far too zoomed in.

  The only way I can get the TV to work, is if I turn on my computer with the trendy first regular computer monitor and then pass the cable VGA to TV.

  I have to do this every single time to use my computer to the TV.

  My friend can just start sound with TV connected without any problem. I'm not sure why I can't.

  Hello Tyler,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur either because of corrupt device drivers or incorrect device settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How can I remove my screen of the iPad sync books?

  I deleted the books of iBooks with my iPad, but there is no way to remove them from the screen of iTunes syncing, so they are accumulating and I have to scroll through dozens to choose those I want. I choose the title, but right click does not remove a menu, or removes pressing, and I can't drag it off the screen. It is becoming a real nuisance.

  It's on your Mac? They show in the iBooks of your Mac application (I guess that your Mac is on 10.9 +) for deletion?

• My iphone 6 s screen has totally blacked out, but siri works. What is its cause?

  My iphone 6 s screen has totally blacked out, but siri works.  What is its cause?

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Satellite Pro P100 can not get the screen to work again

  If someone could point me in the right direction, I would be very grateful!

  I bought a monitor to use when I am in the office (it's a LG Flatron L225WT), installed the software that came with it and plugged. Nothing seemed to happen, then in Toshiba HWSetup, I changed my power on the screen 'LCD + Analog RGB'.

  To cut a long story short, the external screen works perfectly now, but I cannot access the internal screen, even after changing the power supply on the display to 'Automatic Selection '. The Fn + F5 key does not appear to have any effect at all.

  I must have inadvertently done something to mess up the computer. Can anyone suggest how I could reset it back?

  TIA to all who can help you!

  -Laurence

  I put t know what laptop you have and don t know what OS you are using, but it seems that you have managed to set the external monitor as the main screen.
  You should change in display properties (right click on desktop-> properties)

  Somewhere in the settings, you should try to score the internal display (1) and should mark use this device as the primary monitor

  You won't find any similar settings or this will not help then set the operating system to the point of time at the beginning. In this case all settings will be reset!

• Drag n Drop works but is not accessible

  I lost Drag n drop and reinstalled from my disc utilities. I run 2000 on this computer for backup. I loved this software if I have other software on my XP desktop. Prefer the Drag n Drop. Uninstalled and reinstalled 5 times. Can not find the software on toshiba support download pages. It seems to have disappeared.

  Someone knows how to do drag-and - drop work? It's there, but I have no access. It misses a lot.

  Hi Ellen_2,

  Who drag drop software you mean? He of known to me that he is a special software for this function.

  In addition, it would be interesting to know what laptop you have.

  If you use the Toshiba recovery disc, there are all the Toshiba tools pre-installed.

• My laptop screen is blackened or shaded, but to work. Something is darkening up shortly after departure. What should I do?

  My laptop screen is blackened or shaded, but to work. Something is darkening up shortly after departure. What should I do?

  The backlight that run on the screen is burned.  This isn't something that you can fix because it involves disassembly of the computer and parts are not generally available.  It's a hardware problem.  You need to take your computer to a repair store to fix this problem.  If the computer is in power saving mode, that there is no display at all, shines a flashlight on it would reveal a slightly glossy, empty, black screen.

• my Start button is moved to the side and I can't it back in the lower corner have tried dragging, but it won't move anyone can help

  How can I get my Start button to the corner have tried dragging, but does not work can you help me

  Hello

  see if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

• Envy Touchsmart M6 Sleekbook screen works but is not lit

  Hey guys. I went to open my laptop yesterday and the power came the keyboard lights but the screen do not have. I was trying to understand if it is a physical problem or a software problem. It turns out that, when I plugged it into another monitor with a HDMI cable, the computer is always on and I can use it. Because it is a touch screen, I tried to use the screen to browse the Internet and it still worked. So, basically, the laptop still works and the screen works (because I can browse the Internet by using a different screen and the touch screen still works), but the screen itself is not lit. This sounds like a software problem or a physical problem? What ideas you guys have to fix? Thank you

  Hello dblack678,

  Welcome to the HP Forums! I hope you enjoy your stay!

  I understand that your computer screen is not lit. I'll do what I can to help you! To help you properly, I need the following information:

  1 the model number of the computer. If you need help to find this information, please see this site: find the model number of the computer

  2. the operating system. If you need help to find this information, please visit this site in order to determine the Windows operating system.

  3. have you installed new hardware on this computer, before the problem appeared?

  4. have you installed new software or drivers on this computer, before the problem appeared?

  However, since it is a new unit, I would just contact HP support. They will resolve the issue quickly, or service or replace this computer. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns. Thank you for choosing the HP Forums. Have a great day!

  Mario