IPad connects to the wifi but not internet

Similar Questions

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• WRTG54S to connect to the network, but not internet

  I have a WRTG54S and Mediacom 12mbps. My router worked fine on my old laptop (a Dell Vista), he was sitting in a box for about 6 months and now that I have a new (Sony running 7) I can connect to my network, but not internet. I have updated the firmware of 7.6 to 7.8 without change. I have tried no security, wep and wap without change. Also, I cloned the MAC, once again no change. Windows cannot detect all problems, and when I try to activate the router to connect to the internet it always says connection failed. I can connect directly connected to the modem but not when connected to the router or wireless. Any ideas? Thank you

  Problem solved. I had to go to a Motorola SurfBoard 4100 to a 5100. Thanks anyway

• Laptop connects to the network, but not Internet.

  I'm trying to fix a HP DV6000 laptop that can't connect to the Internet. It is running Vista Home Edition. It will connect to my LAN cable or wireless network, but not the Internet. I checked a few things and discovered that the TCP/IP protocol is missing. When I try to add using properties of LAN, TCP/IP is not an option.

  I did a complete system restore. System set!

• can connect to the network but not internet XP

  I use a computer on a local network xp, can connect to the network, ping the DNS server, gateway, etc.  However, I can't not conncet to internet.  When I ping a web address using the address of the site name or xxx.xxx.x.xx I have no success.  Tried to reset winsock, tcp/ip, without success.  Would appreciate any help.

  First course of action:

  1. turn off the PC.

  2. turn off the router.

  3. turn on the router.

  4. turn on the PC.

• 2 13 pro tablet of yoga - to connect to the network, but not the internet

  Hello!

  I got my new yoga today and immediately connect it to wifi...

  It connects to my home but not internet network (or connection very very creepy)

  tried home through my phone LTE and still...

  tried by bluetooth and same result... slow as hell... maybe approx. 10 KB.

  im looking good on the web and don't find anything...

  probobly you are the people with the experience...

  help would be appritiated!

  Kind regards.

  Hey guys quick update!

  After sending the lenovo Tablet and a few screams (sad that we cannot otherwise)

  they replace them with sealed brand new...

  so thanks for the help!

• Computer connects to the network, but not to the Internet, connect to the only local

  Hello world

  OK, so I have a HP computer with the installed version of Windows Vista Home Premium 32-bit. I've had it for almost 2 years now and have had no problems connecting to Internet... until now.

  I can connect to networks... both wireless and cable, but I can not get Internet. I used the IP, subnet mask, gateway and server settings DNS to another computer that works with this specific local network just to see what happens... my computer has failed.
  Until recently, I could connect to this WiFi connection in a coffee shop, but the last time I tried it didn't work. I've connected to the network but not the Internet. He told me that the DNS server did not. I'm starting to think that something is wrong with my computer.

  I saw that the solution for some people running the Norton removal tool, however I had uninstalled Norton almost as soon as I got my computer 2 years ago and ran McAfee instead. I don't think that Norton should have an impact on me more.

  Is there a solution to this problem... or I'll just have to try everything that is out there?

  Thanks for your help!

  Hi MomPlaysBass,

  Finally, my problem has been resolved - it wasn't my computer after all. The modem may only be connected to a computer. If you want to connect to another computer, you can connect the computer to the modem and then put it back. My computer worked fine after that. Whenever we want to switch between computers, even if I have to reset the modem.

  I don't think you have the same problem, but just in case, you can try to reset your modem - it's a button on the back or a small hole that you can reach with a pen... Hold the stylus for about 5 sec or maybe a bit more and then let go. That should reset your modem and might help you with your problem. Your computer should also have created a restore point... If all else fails maybe you can try to get back to the final point where your computer worked.

• WNDR3700 and Samsung TV: wifi but not Internet

  Hello

  I just bought a Samsung smart TV and is now trying to connect to the internet via wifi. The problem is that it connects to the router, but not to the internet.

  Other things that do not have an internet connection:
  -Cable Ethernet to the router works fine.
  -Wifi TV through my phone (connected to the internet with 4 G) works very well.
  -Wifi to my neighbor Asus router works fine.
  -When it is connected to my WiFi router, the TV responds to the ping.
  -All other devices connected to my router have access to internet.

  So, the problem seems to be with my router...

  Things I've tried but no luck:
  -Change the DNS on my TV in the local to OpenDns or Google.
  -Change the DNS on my router to the foregoing.
  -L' MAC address of the TV to give a static IP than automatic.
  -Double check that the TV using the same wifi encryption as my router.
  -The port forwarding 80 and 433 on television port.
  -Reset the TV in order to clear its DNS cache (got help from Samsung support to do this).

  Could I change in the router? It would be nice not to have to factory reset the router, since I'm not looking forward to start all my settings

  I don't think that you have a choice other than a reset to the default values.

  try to set up a network of comments without security to see if the work, then try the different security settings

• Connect to the router but no internet.

  I use windows xp and netgear wireless router.till yesterday I browse the internet.from today morning, I'm not in a position to communicate the internet.but it will connect to the linksys router not internet.i can ping default gateway.but, that I can't browse the firewall disabled net.i. What is the problem?

  Hello

  1. what exactly happens when you try to connect to the Internet?

  2. you get any error message?

  I suggest you to follow the steps from the link below and check if it helps.

  Method 1 : in the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Try to run fix it from the link below:

  http://support.Microsoft.com/kb/811259

  Hope this information is useful.

• What is the proper way to create a user who can connect through the Console, but not through the VMWare Client?

  I did the following steps:

  1. create a user

  2. assign the Group root (remove all the other group of the user)

  What's my not just?

  Thank you!

  It is the way to do it.   Either you must be part of the root group to be given to the role admin (or a bespoke) at the level of the host to access the DCUI.

  If you create a user is added to the root group, but is assigned all permissions (either singularly or through a group) on the host then, then the user will be able to connect to the DCUI but not the client vSphere (or any other method of the API).

• iPhone connects to the wifi but does not connect to internet

  I have an iPhone running iOS 9.3.2 6s (last updated).

  The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

  This also happens with my daughter 5s iPhone and iPad for my son.

  Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

  We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

  I tried to go into my phone settings and reset the network.  Always problems.

  It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Devices to connect to the airport, but not to the Internet

  Hi all; Here's my situation:

  I just bought a new Airport Extreme to replace my old router (Linksys). In our House, we have two iPhones 6, as well as the iPad, Apple TV and MacBook Pro that were all bought again this year. All these things were able to connect to the internet using our old wireless router.

  As I have configured and installed at the airport, various devices have been able to connect without being able to connect to the internet (i.e. AirPort Utility, the airport connection is a green dot, while the actual internet connection is an orange): first it was the MacBook having this problem while the phones and the iPad have been completely connected. After I simply rebooted everything several times - i.e. the modem, router, and MacBook - I finally got the MacBook fully connected (without really changing all the settings, which are all entered correctly). Now, however, it is the two iPhones that will connect the airport but not actually in the internet.

  Any ideas? I must say, these strange little problems idiopathic who seem to always pop up with Apple products are starting to really bother me... I never got my MacBook to connect to the Apple TV via AirPlay.

  Any time you change the material or providers of Internet services, networking, it's always a good idea to perform a complete recycling of your network equipment power. Check out the following Tip of an airport users for more details on how to do it. Please post back your results.

• Laptop HP G70 connection to the router but not the internet

  I have a laptop HP G70 running windows 7, I got a new router installed. My computer to the router, but not to the internet links. I tried the software updates for my drivers running, doing all used to end router for example change etc channel/parameters/IP wifi. I tried to turn off the wireless, reset the router and re enabling it does not work.

  It will connect to the internet ethernet of nis.

  My laptop connects fine with other networks if it is not wireless.

  All other devices are connected to the router.

  Please help this is extremely frustrating.

  You are the very welcome.

  I compressed the file and downloaded on my Skydrive account, which I shared the link below.

  Download, unzip and run the file called sp54972.

  https://onedrive.live.com/redir?RESID=832F4957D2E51B93! 263 & authkey =! AEOhdjA3QVhETy0 & ithint = % 2czip

• My laptop, connect to the network, but not the internet!

  My laptop connects to the network media blank but not internet. My roommates using the network can connect to the internet. I tried various things but not vain. I also tried to get in touch with the Virgin on this subject, but they can help. Is it my laptop and is there something special I need to do with a computer hp laptop. Help, please! Thank you!

  Hello

  On the Start Menu, click programs principally made, click Accessories, right-click on command prompt and select "Run as Administrator".  In the prompt, type the following commands, pressing on enter after each command.  Include spaces in the commands, as indicated.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int ip reset c:\resetlog.txt

  netsh winsock reset

  Type exit and press ENTER.  Restart the PC and see if you can log in now.

  Kind regards

  DP - K

• Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

  Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

  Hi LouiseFarmer,

  It seems there is a problem in the basic WIFI the printer setting.

  I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp