iPad hangs when I try to load

Similar Questions

• When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions.

  When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions. What now? Thank you

  Hello

  Disconnect all external devices from the computer and try to restart the computer and check what is happening.

   

  Step 1:

  Try to boot to the desktop in safe mode and check what is happening. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer hangs when you try to watch live TV through windows media centre__

  Computer hangs when you try to watch live TV via windows media Center
   
   
   
  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 3081
  More information about the problem:
  BCCode: a
  BCP1: FFFFFA600C193FF8
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF8000233499E
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\Mini112509-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-132569-0.SysData.XML
  C:\Users\user\AppData\Local\Temp\WERCC53.tmp.version.txt
  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
  

  Hi Eddie Hunt

  Welcome to the Microsoft Answers Forum!

  I suggest you try this method and check if it is helpful

  Method 1:

  Start your computer in a clean boot and check what third-party software or program is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to run check and clean boot if you have the problem.

  i. Click Start, type msconfig in the search box and press ENTER.

  II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  III. in the general tab, click Selective startup.

  IV. under Selective startup, clear the check box load startup items.

  v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  VI. click OK.

  VII. When you are prompted, click on restart.

  VIII. after the computer starts, check if the problem is resolved.

  If the problem is solved, check what third-party software or program is at the origin of the problem, referring to the link given below:

  Clean boot

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  i. Click Start, type msconfig.exe in the start search box and press ENTER.

  II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  III. on the general tab, click the Normal startup option and then click OK.

  IV. When you are prompted to restart the computer, click on restart.

  Method 2:

  Install the latest codec package and check if that helps, link below will help you with the same:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en

  Method 3:

  Update the graphics card. Steps to update the graphics card:

  i. click on start, type devmgmt.msc and then on enter.

  II. develop the graphics card and right click on the sub element and click on update driver.

  Link for reference: problems with watching TV on your computer

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• When I try to load firfox it says its all the loan running.the computer shows who or if it is I don't think

  When I try to load Firefox, he says it's all ready running.when I use control alt delete it shows that nothing is running.and when I try to reload again does it again even after system reboot as it says to do.

  See also:

  • https://support.Mozilla.com/kb/Firefox+is+already+running+but+is+not+responding

• my iphone hangs when I try to open the content of the email

  my iphone hangs when I try to open the content of the email

  What ios version do you have? It's 9.3? Because there is a bug in the most recent update, which can freeze your mail and Safari.

  Apple should have an update out before the end of week

  Fingers crossed

• When I try to load a program (coreldraw) it appears impossible to load error: 998.

  Original title: Erreor 998!

  When I try to load a program (coreldraw) it appears impossible to load error998! Why is that happening and how can I solve this problem?

  Hello

  1. which version of the Windows operating system that you are using?

  2 have had any changes made to your computer before this problem?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  For Windows Vista and Windows 7:

  You can follow the article to find the cause of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  For Windows XP:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  For more information, you can consult the CorelDraw support link and check if it helps:

  http://CorelDRAW.com/forums/t/33616.aspx

  
  NOTE: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  
  You can also contact Corel draw support for assistance:

  http://CorelDRAW.com/forums/

  I hope this helps.

• Finally got the computer to recognize the iPad but when I try to do something tells me that the Bluetooth device is not a driver

  Original title: hardware device

  I'm trying to get my iPod and ipad to communicate via bluetooth. I finally got the computer to recognize the ipad, but when I try to do something, told me in troubleshooting that the device didn't bluetooth "t have a driver. I tried to download without success. I'm not what you call computer savy. could use a little help.

  Hi Annemschipper,

  You can check the following items and check if Windows is able to recognize Bluetooth devices.

  The problems with Bluetooth devices

  Change settings for a Bluetooth compatible device

  You can also visit the Apple support article and see if it helps.

  Device not recognized in iTunes for Windows

  Bluetooth and Wi - Fi settings grayed out or dim

  Hope this information is useful.

• I had to completely restore my computer with a F10 restore now it wont let me not put my software on without XP Service Pack 2 when I try to load SP2 it says that there is an error__ of cryptographic

  I had to completely restore my computer with a F10 restore now it wont let me not put my software on without XP Service Pack 2 when I try to load SP2 it says that there is a cryptographic error

  Any ideas?

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I try to load MS Office 2010 error message indicates to load MSXML version 6.10.1129.0, where to file?

  When I try to load MS Office 2010 on my lap top, Iget an error message saying load MS XML version 6.10.1129.0.  Where can I find this file to download?

  Hello

  You can download here (the good language):

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=6276

  If you have Win XP, then you have the 32-bit version of your operating system - so the right file is "msxml6_x86.msi". And you must have min. SP2 installed.

  LC

• When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package.

  Original title: I'm loading Quciktime.

  When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. "How to do this?

  Hi Tonyb13apb,

  ·         The issue is limited only during the installation of QuickTime?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Uninstall and reinstall QuickTime and check.

  http://support.Apple.com/kb/HT1925

   

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  a. click Start, select run.

  b. type msconfigand click OK.

  c. the system dialog Configuration utility appears.

  d. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

  e. When prompted, click on restart to restart the computer.

  If the problem persists, you can contact Apple support for more help and information.

  http://support.Apple.com/kb/HE57

  Let us know if it helps.

• Windows Movie Maker closes when I try to load more than six clips on the storyboard.

  I have Windows XP on my computer.

  When I try to load clips in total more than 6, Windows Movie Maker closes down, regardless of how many clips I try and load at any time.

  I save my 'best video clips for playback on my computer' - 'Create clips when the wizard has finished.

  Y at - it a fix for this please.

  Thank you

  Orewa Brian

  New Zealand

  Use windows media encoder 8 or 9 series. You might find it useful for audio/video playback, recording or conversion, get it at:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=000A16F5-D62B-4303-BB22-F0C0861BE25B & displaylang = e & displaylang = in

• Loading error when you try to load the Halo 2 "files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory.

  Original title: load error when you try to load Halo 2

  People at Microsoft, I have a problem trying to load Halo 2 on my dv7 Paviliaon with Vista and the 2.8 GB Intel Centrino 2 processor. When I try and load the game, I get and error stating: "the files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory. "It bothered me for several reasons. One: the disc that I use is an original disc out of the box so hsould have no problem. Two: the game has been loaded previously on the same computer without apparent problem at the time. It has been deleted (don't remember why) and when I tried to reinstall, the error came. Three: I did as recommended and updated all programs and drivers, nothing works. So my question is, how do I reinstall Halo 2 and what this problem will arise if I decide to buy and load Halo 3?

  Thank you for your time in advance.

  Hello

  As you are facing problems with Halo 2, I suggest you to refer the link for better support:

  http://forums.haloonwindowsvista.com/forums/

• I get an error 0643 when you try to load updates

  I get an error 0643 when you try to load updates, ideas

  I get an error 0643 when you try to load updates, ideas

  This tutorial will Support MS work?

  http://support.Microsoft.com/kb/976982

• "When I try to load the game Empire Total War I have a Microsoft window error ' Empire: Total War has stopped working"

  Original title: when I try to load the game Empire Total War I have a Microsoft window error

  Empire: Total War has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  But when I do updates on the game and it still shows the error on the Microsoft Windows error. Also, when he is on the main site of most of the people have problems on this game I noticed just last night so can you help me and I have try all the sites to see if it works try reinstalling it and what I think.

  Hello

  1 did you recent hardware or software changes to your computer before this problem?
  2 have you tried the troubleshooting steps to solve the problem?

  I suggest you try the steps and check them off below.

  Step 1: Update the video card driver.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2: Download and install the latest version of DirectX.

  Reference:
  How to download and install DirectX
  http://support.Microsoft.com/kb/179113

  Step 3: Check if the problem persists in the clean boot state.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.

  http://support.Microsoft.com/kb/929135

  Step 4: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can also try contacting the seller game to help on this issue.
  http://forums.Sega.com/

  I hope this helps.