IPad help startup

Similar Questions

• can't get the music from iTunes on the iMac iPad air - get only the image 'music' on the iPad - help

  My iPad will air show a picture when I open the application 'music' - the last installed iOS and always the last version of iTunes on my iMac - don't synchronize that I can see - help

  Assuming that you have already tried a reset?

• iPad help activation?

  I'm sure it's an iPad 3. A few weeks ago, I went to him, that it is need of activation. He said to enter the Apple ID used to set up the iPad. I entered in my Apple ID and it says «this id can be used to unlock the iPad» I tried a different email, after which he says of course it's 'Wrong ID or password'. I changed my password and tried again, it says the same thing. I changed my password and I changed my email, it says the same thing. This happened to someone, and are there any ideas for what to do?

  If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3 - Apple Support

• Flash Player / iPad help...

  Anyone know why I am unable to download Flash Player on my iPad (OSX)?

  Because your iPad is not OS X. These are the iOS 6 or 7, which has never been compatible with Flash Player... Since 2005 when Apple released the first iPhone.

  It will never be a Flash Player for iOS.

  Apple recommends SkyFire. It is available in the App Store.

• Pavilion dv7: help startup password

  As soon as I start my laptop, I asks me to enter unlock password after three tries, I got an entry unlock password(key:59280834)

  Hello

  Enter: 46188210

  Kind regards

  DP - K

• My ipad was stolen and does not activate my find my ipad... help

  Hello, please my ipad was stolen two days ago, unfortunately for me, I did not activate my find my ipad. Please, can he still follow? I have all the details of the ipad help!

  Hi imeyoya

  I'm sorry to hear that your iPad was stolen.

  Unfortunately, without finding my iPad is enabled on the device, there is not that you can do to recover or protect the data on it, but you can protect your account. I hope that you had a defined password.

  If you do not enable find my iPhone before your device has been lost or stolen, you can not use it to locate your device. However, you can use the following steps to help protect your data:

  1. Change your password on Apple ID. By changing your Apple ID password, you can prevent anyone to access your iCloud data or using other services (such as iMessage or iTunes) from your missing device.
  2. Change the passwords of other internet accounts on your device. This might include email, Facebook, or Twitter accounts.
  3. Report your lost or stolen to the local police unit. Law enforcement could ask the serial number of your device. Find the serial number of your device.
  4. Report your lost device to your mobile phone service provider. Your carrier can deactivate the account, preventing the use of data, texts and phone calls.

  Find my iPhone is the only way that you can follow or locate a lost device or missing. If find my iPhone is not activated on your device until missing, there is no other service from Apple that can find, follow or flag, otherwise your device for you.

  What to do if your iOS device is lost or stolen

• iPad Pro no service

  Hi everyone had this problem on a new iPad Pro no service tried two new Sims just don't sign

  Hi Stuart,

  Thanks for this info and in choosing the communities of Apple Support and congratulations on your new iPad Pro. I know how to get a SIM card to work with iPad Pro is important to you! Items and the following steps will be useful for troubleshooting and solving your problem to obtain a SIM card in your iPad Pro:

  1. first of all, check carrier settings updates, as this may include updates from Apple and your settings provider for carriers, such as the network, by calling, data phones, e-mail, personal hotspot and voicemail settings.

  iOS: update your carrier settings

  2 reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  Reset the iPad - iPad help

  3. Finally, according to this article:

  If you cannot connect to a cellular network or cellular data

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account or your network, try to restore your device.

  The backup of your iPhone, iPad and iPod touch
  Import photos and videos from your iPhone, iPad or iPod touch
  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  See you soon!

• Apple ID password at startup check Message

  I recently bought an iPad Pro, having already owned an iPad 2 air.

  However, since the Pro purchase (and use it alongside my Air 2), I was invited on two iPads (at startup) for my password Apple ID.

  I am presented with the choice between 'Not now' or 'settings '. I'm then prompted to enter the password for my iCloud account. This happens to start on two iPads. If I choose "Not now," I'm out of FaceTime and iMessage on the device.

  I have an iPhone 6 Plus and do not get the prompt on this device.

  I tried to sign in/out my account iCloud on both devices, but it did not work. I appreciate any suggestions anyone has!

  Use the application settings. Go to settings > iTunes and App Store.

  If your identifier Apple is not displayed at the top of the screen you sign for your Apple ID normally once that you do this you may not reconnect to your Apple ID.

  If your identifier Apple is already shown it tap it in and out. Then reconnect.

  Also, in some devices setup password Apple ID could be offered as the password to unlock the device. You can check if this is the case in the settings app as well.

  Settings > Touch ID and password

• iOS 5.1.1 not connect to itunes

  I have an iPad 1st gen 5.1.1 running.  I have an application that is supported on 5.1.1 that I would like to update.  I can't connect to the app store.  Everything works fine on an iPad 2 I.

  What have you tried so far? for example you have:

  -connected to and back to your account on it

  -disconnected and reconnected to your network (and tried another network)

  -closed the app from the App Store via the taskbar of the iPad

  -do a soft-reset/reboot of the iPad?

  (I asked for your post be moved to the forum iPad help here, you posted is for questions about the iTunes app U.)

• iOS, Microsoft Excel corrupted file

  I have problems to open the files on my ipad pro using the Excel program for ios.  I can work on a file (located in Dropbox) several times and then for no reason that I know, I can open is no longer the file... the message "Could not open the file, file corrupted".  I can still open the file on any of my other computers, but the only way to open again on the iPad is to make an order "Save as" and rename it on the computer.  It is a huge problem that I converted to travel with my iPad pro instead of my laptop, so when on the road for business, I'm stuck with the files that cannot be opened.  Does anyone have knowledge of this problem which can enlighten us on a fix?  In the case against the iPad Pro will become a home decoration and I will go back to the laptop and an external wifi device...

  you will probably get the best support to microsoft https://support.office.com/en-us/article/Excel-for-iPad-Help-6b5dc2e1-a8e4-48e6-bb69-cb9a3964bc91

• Problem with TV show series purchased on iTunes

  Bought 8 episodes of TV shows on the iTunes Store and they have downloaded in the Section TV shows to iTunes on my Mac.   As it was a gift and I didn't not found immediately, I used the Options mode and temporarily transferred the episodes section of home movies where I knew that the recipient would not find them.

  Now I want your choice of television programming, but iTunes won't allow me to move as there is no menu drop-down available in home movies for me to pass the episodes.    Can someone tell me how to access the drop down to the Home Theater.    Thanks in advance.

  Bob Crawford

  You try to do that in the movies section of your Mac iTunes library home, or they are on your iPad (I assume you have an iPad you have posted in the iPad help forum) and you use iTunes on your Mac to try to update on this issue?

  For the television programs in the library iTunes on my Mac, if I move a Home cinema and then select/highlight it in movies at home and "get info" (command I), I get an Options tab on the popup that allows me to bring him back to TV Shows - you do not receive the Options tab, or not the kind of media?

• synchronization of presentations keynote with a small team

  Hello, I'm looking for an effective way on the sharing of a presenting keynote with a team of 8 people with iPads. Ideally, the presentation will be synchronized so that when it has updated all versions of team members will be updated to the latest version. This better would be using an iCloud account with all members of the team, or it would be possible to synchronize with a team using itunes?

  Any advice would be much appreciated.

  Hi JimDowland,

  Looks like you want to work with others on a project of speech through several iPads. I think that you will find on the iPad help site very useful:

  Collaborate with others on a presentation

  http://help.Apple.com/keynote/iPad/2.6/#/tan5fc7516cf

  Thank you for using communities of Apple Support.

• power cable 380 R9

  Heyo everyone,.

  I am eager to confirm before connecting my new card, including the cable from the PSU to use.  I have an Alienware Aurora R4 with a 850w PSU.  There P14, P15, P16 and P17 six connectors for pins, with a connector 2 pin cable connectors P15 and P17.  The card I bought is a Strix Gaming R9 380 4 GB ASUS with a connector 8 pins.  Can I use connectors P15 or P17 and use the 2 pin attached to connector?  Or can I use a 6 pin adapter 8?

  Thank you

  Chuck

  Edit: Covey Leader at Raven

  Yes, the long road home Chuck...

  n joy the Kraken

  ____________________

  I know that u need of 6870 for update to A11, so he worked before you deleted it. I believe in any case that the mthrbrd is ok; Unplug the machine, press the high power button for a minute; now get in there & reinsert the processor 8, mthrbrd 24 p ATX, reach & 66pin in block connector of the power supply, unplug the video cable. Remove all the RAM. Plug it back up everything, restart, wait mthrbrd complaining without RAM (beeps etc.), so she, install a RAM, restart, see if mthrbrd gives a beep (signal it's ok), and then see if the video output occurs. If so, enter the Bios, sniff around, & from there. A person could try to RAM in several locations on a start-up period, waiting for housing help startup occur

  Otherwise? Power supply test? No power? Learn more about Dell Built In Self Test to

  We need that original 6870 / mthrbrd combo to give us clear to all, then work on 380 then, so the subsystems can be confirmed working 1. Back to the drawing board

  2 computer Alienware - General hardware troubleshooting

• Windows 7 Ultimate is enabled but claims its not authentic, unchanged over the years!

  Lenovo T60, 4 GB RAM, running on a 160 GB SATA drive, finally practically full.  Bought a Seagate 500 GB SSHD, used the Seagate Disk Wizard to clone the drive through using a second hard drive adapter.  Everything went a lot until the clone said that it has not been activated.  Well, got out of the Windows 7 Ultimate package of disks and put in the key, and it validated and activated.  A little later upward appears one Windows may not be authentic, and so I ran the tool MGADiag.EXE results:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - YX8XP - 8HRTW-GM8MP
  Windows product key hash: QoquQ6cNTg1Gbdkd870ErDo2GbU =
  Windows product ID: 00426-OEM-9154243-42443
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {56F3772B-E12B-40C7-BABD-493BF45F2814} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.151019 - 1254
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Outlook 2007-100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\Nancy\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.19061], Hr = 0x800b0100

  Other data-->
  Office details: {56F3772B-E12B-40C7-BABD-493BF45F2814}1.9.0027.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-GM8MP00426-OEM-9154243-424433S-1-5-21-295262409-1227426759-3493255771LENOVO8743GZULENOVO7IET34WW (1.15)20080716000000.000000 + 000EBF83107018400FA04090409Time(GMT-05:00) Standard is03LENOVOTP-7I 100100Microsoft Office Outlook 2007125D44A95A13ECF14C3clzRNJBpk8H6CWPEtJ5T95KZQ = 81610-906-0843114-622901 100Microsoft Office home and Student 2007128FC7337E9734KpBWq8HtFQayILk0Mk1bA1/H1Lk =81602-922-3355964-688221

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: cfb3e52c-d707-4861-af51-11b27ee6169c
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00182-542-442443-02-1033-7601.0000-0132016
  Installation ID: 008563465401784834500501216095359986806664071552032563
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: GM8MP
  License status: licensed
  Remaining Windows rearm count: 4
  Time to trust: 13/01/2016 23:39:26

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 1:13:2016 23:33
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID hash: MAAAAAEAAwABAAEAAAABAAAAAgABAAEAeqioI2tJ9O5I5D7GWo2IwNQWyBGYqiqF

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO TP - 7I
  FACP LENOVO TP - 7I
  HPET LENOVO TP - 7I
  BOOT LENOVO TP - 7I
  MCFG LENOVO TP - 7I
  SSDT LENOVO TP - 7I
  CO-SUBMISSION LENOVO TP - 7I
  TCPA LENOVO TP - 7I
  SLIC LENOVO TP - 7I
  SSDT LENOVO TP - 7I
  SSDT LENOVO TP - 7I
  SSDT LENOVO TP - 7I
  SSDT LENOVO TP - 7I

  Have you tried to check the file system (CFS) Scan and repair the filesystem - Microsoft community ?

  I would also go on the new clone to help startup files Startup Repair.

  Run the Windows Update - Microsoft Windows help troubleshooting tool

  Of reset Windows Update components .

  System update scan tool corrects errors of Windows Update in Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

• Move a Virtual Machine from one place to the other?

  Hello.

  I've been getting better and better at VMWare with the help startup great I'm out here.

  I'm under free ESXi here at home. If I create a virtual machine here which is the easiest way to copy the virtual machine on an external drive and move it to a customer's location? I know that I can use Backup Exec to backup the file but I don't know there is a built-in VMWare tool to do this.

  I can't just turn off the machine and copy the virtual files via the VSphere Client on a drive, can I?

  Thank you.

  Mike Gallery

  From the file menu in the client vSphere, you can export an ovf which can be restored the same way somewhere else.