iPad Hotspot stops when the ipad goes to sleep!

Similar Questions

• Will be that the download stops when the computer goes into sleep mode?

  Will download, install, or all these action stops when the laptop goes to sleep.

  MK

  Yes, it will be.

• Music on iOs 9.2 playback stops when the phone goes to sleep

  I get a lot of e-mail music files.  I used to be able to read the files, leave email and use other functions, and could still play music.  Now when I go out of the enamel, the music stops when I upgraded to 9.2

  So, I listen to music from an e-mail and hung up and when the phone "goes to sleep" music station.  It didn't happen before 9.2.

  Please fix this.

  I have the same problem. In my case, the music also stops when I get out of the e-mail application.

  Please, how to fix?

• My computer is connected to a router via ethernet but my wifi stops when the computer goes to sleep. How can I stop this?

  I just installed the router today.  Wifi a works fine until the computer goes to sleep, then my wifi for my Ipad, nook etc off.  This should not be the case.  Why would he do that?

  Hello

  1. have there been recent changes to the system before the show?

  2 is the issue limited to Wi - Fi?

  Method:

  Follow these steps and check if that helps.

  (a) click Start, type Device Manager in the search box.

  (b) click on Device Manager , according to the results.

  (c) expand the wireless adapter, right click on the drivers listed.

  (d) click on Properties, click on the power management tab.

  (e) uncheck the option allows the computer to turn off this device to save power.

  (f) click apply, click OK.

  Let us know if it helps!

• Continue to application play when the device goes into sleep mode

  Hey guys,.

  wondering if anyone knows how to maintain an active application when the unit goes into fashion watches?

  My application needs continue to work when the device goes into sleep mode if he went in that State by itself, or if the user put it to sleep.

  Yes I tried it on a physical device. It works, I promise you

  To clarify, here is what you will see when using KEEP_AWAKE:

  1 device shall not sleep when the application is currently active

  2. the device shall not sleep if the application is reduced, and you are in mode carousel

  3 device WILL sleep if the user switches to another application and full screen.

  In addition, another thing to know, if the unit is not assigned to the showcase mode, which is not by default, the audio stops when the user leaves your app. This is not related to sleep and is totally out of our control, but could be a good thing to add to your product details.

• Windows wireless service turns off when the computer goes into sleep mode

  Windows 7 64 bit, HP DV4 laptop. Was working fine until the update of adobe reader may also have a windows update. Have since been uninstalled adobe reader software and reinstalled. Updated the qualcom wireless driver.  WLAN keeps logging service when my laptop goes to sleep. I can restart with services and it works again. Autoconfiguration WLAN service is set to restart the service for 2 trys.

  Hello

  . You receive an error code or message?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent possible ask contradictory from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below.   How to solve a problem by performing a clean boot? : For more information on the execution of clean boot, follow the link.

  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.

   

  Method 2:

   

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 3:

   

  Why am I disconnected from my network? :

  http://Windows.Microsoft.com/en-us/Windows7/why-am-I-being-disconnected-from-my-network

   

  Method 4:

   

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• Internet stops whenever the computer goes to sleep.

  Original title: run a convenience store on the laptop to use internet every time I turn it on
   
  Whenever the computer is turned off, wakes up from his sleep or I close the cover and re - open, internet goes off and I can't get online. I have full WI - FI bars so I don't know what the problem is. I must restart the laptop or run a troubleshooter to get the internet working again. When I run a convenience store I get a message saying "the default gateway is not available - fixed ' with a small green tick next to it. I have to do this every single time and it's annoying me so, especially since it's a brand new laptop. I get no error message when I go on the internet just "the Web page is not available. The problem is not the WI - FI, as I had other laptop works well as well as many other WI - FI devices. Any help is very appreciated.

  Hello

  Thanks for posting the request in the Microsoft Community.

  According to the description, it looks like the connection Internet is lost when the computer "stops, wakes from sleep or when you close the lid and re - opens.

  This problem occurs if the computer enters sleep or hibernate until he finally notice the part of the system that controls the network-icon feature.

  Method 1:

  To work around this problem, use one of the following procedures:

  a. restart the computer.

  b. complete the Explorer.exe process and restart this process. To do this, follow these steps:

  i. open the Task Manager. To do this, press CTRL + SHIFT + ESC on the keyboard, click on more details to decompress.

  II. click on the processes tab.

  III. in the list of processes, click on explorer.exeand then click end process.

  IV. When you are prompted to confirm that you want to continue, click on end process.

  v. on the file menu, click new task (run...).

  VI. in the create new task dialog box, type %systemroot%\explorer.exe in the Open box, and then click OK.

  Method 2:

  Disable the power management feature in network adapters

  (a) Press Win + c on the keyboard to open the menu of charms.

  (b) Control Panel type on the charm of the research.

  (c) open the control panel.

  (d) open the network and sharing Center.

  (e) click on change settings card on the left side panel.

  (f) right click on the respective network adapter.

  (g) click on properties.

  (h) click the power management tab.

  (i) ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  (j) when you have disabled the boxes, click ok, and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Try the following steps and answer if you need help with this problem and we will be happy to help.

• 64 bit Vista crashes when the system goes into Sleep Mode. Have cold start. Simultaneous began with the June 8 patches.

  This problem started a week ago, say at the time of the June 8 fix release. I think the relevant in case the log message is 'detected bad event COM + a system code back during internal processing. HRESULT is C 8007043 line 45 of d:\longhorn\com\Complus\src\events\tier1\eventssystemobj.epp. Error report, please contact Ms Product Support Services. "However, when I contacted MS, they would not help without paying the fees because it was an OEM installation. The system remains upward after the stabilization of the system going on in SafeMode after cold start, close and then switch to normal mode. However, once launched, it seem (ed) as the hard drive light was permanently. I did a restore to June 8, most early I could continue.  The hard drive worked without interruption after that.  I did a forced sleep and restart and the system froze again. With this in mind, I wonder if .NET patches that were released were running somehow at the time of sleep and that he could not recover.  OR, during sleep, the system was made of updates and the system has been disabled, corrupting the updates.  I looked at the Windows Update settings and it has been set to automatically install updates.  It is quite possible that the user did not know and did not recognize there are pending updates.  Maybe updates were not correctly packed in order to manage a system from going into Sleep Mode, while they were installing. In any case, any who would provide help on how to identify the problem and fix it.  There may be registry entries need to be corrected?

  Duane G. Leet, Ph. d. 45 years of experience in technology

  Microsoft support has provided a solution.  Here is the procedure:
   
  We can run reset Windows Update Tool and system update tool to detect incorrect manifests, files or data from the registry. Please follow the steps below.
   
  Step 1: Launch the tool to reset Windows Update and the update of the system tool
  ====================================
  1 download and run reset Windows Update Tool from the link below:
   
  http://go.Microsoft.com/?linkid=9665683
   
  2 download and run the update tool of the system from the link below depending on the Type of system:
   
  Update for Windows Vista 32-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b4d90b06-c27d-4483-bc1f-04d43fa7b293&displaylang=en
   
  Update for Windows Vista 64-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f6f353c0-d00e-43e7-97EF-0feefc7ff064&displaylang=en
   
  Note: It may take an hour or more time to detect and replace the erroneous data, please be patient. When it is finished, restart the computer and reinstall Windows Vista SP2.
   
  If Windows Vista SP2 can not always be installed, I suggest to download the stand-alone Installer and install it in clean boot Mode.
   
  Step 2: Download the installer of Windows Vista SP2 Standalone
  ===========================================
  1 download the installer of Windows Vista SP2 Standalone from the link below depending on the Type of system:
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 32 bit (KB948465) (475,5 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d&displaylang=en
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 64 bit (KB948465) (745,2 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3&displaylang=en
   
   
  Step 3: Install Windows Vista SP2 in clean boot Mode
  =========================================
  Please disable all startup items and services of third parties at boot to avoid conflict when installing Windows Vista SP2.
   
  1. click on 'Start', type: MSCONFIG in the search box and press ENTER.
   
  Note: Click 'Continue' if the "User Account Control" window appears.
   
  2. click on 'Services', check "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).
  3. click on 'Start', click 'Disable all', click 'OK' and restart the computer.
   
  Note: Disable temporarily the startup group only prevents the start up programs from loading at startup. This should not affect the system or other programs. We can manually run these programs later.
   
  4. double-click the downloaded standalone installer and follow the instructions to install Windows Vista SP2.
   
  To restore the computer to a Normal startup, repeat step 1 above. Then click "Normal startup" in the general tab, click on "OK" and restart the computer.
   
  If there are any questions or concerns, feel free to let me know. It is my pleasure to be useful.

  +++++++++++++++++++++++++++++++++++++++
  The cause was not determined, but evidence tends to a disturbance in the download or installation process, with one of the errors in the event log is an error in checksum on one of the modules. With a large file, 745 meg, the mean time to failure on a LAN network is probably shorter than the download time.  The installation process was probably longer than the time that the system has increased...  Corrective actions for Microsoft could include more small download / install, not allowing an automatic installation for automatic download over a certain size, or deal with the best controls during installation to intercept the checksum error.  Duane G. Leet, Ph. d. 45 years of experience in technology

• Yoga 2 Pro advertising plays when the computer goes to sleep

  Hello, so I recently bought a Yoga 2 Pro and have almost no complaints. One small thing I noticed is that my computer from time to time upon entering the mode "ensure" with the lid open, instead of displaying a black screen as planned will instead show an advertisement stating "4 NEW MODES, LENOVO YOGA 2 PRO" and will begin to show a video advetisment.

  I would rather the computer make a traditonal sleep mode when the lid is left open, how can I disable this advertising? I tried to play with the sleep settings in windows, but not luck. This occurs when both on battery and plugged in. I also tried to uninstall the software of Lenovo's Transition, but that did not help. Any ideas? It seems that the computer may be in demo mode? Thanks for the help.

  Good afternoon and welcome to the community.

  This is the default screensaver.

  To change it, right-click on the desktop, select Customize, then select the screen saver at the bottom right. You can then make changes in the window that appears.

  I hope this helps.

• Defragmentation stops when the display is off

  I recently used the Disk Defragmenter to defragment my hard drive.  After reviewing the forums I discovered that it does not work when the computer goes to sleep so I took care of the mode "Eve".  However, my computer is always programmed to turn off the display after 10 minutes.  As the defragmentation. can take several hours, I didn't leave the screen while he was doing his job.  However, when I returned to the computer during the process and reactive the display, he did not know if the defragmentation. given market or extended.  I would not have thought that the display off should interrupt the defragmentation. but I would appreciate clarification on this point.

  Hello

  If the screen saver is on, Defrag will still work in the background.

  There is no need to do what you do.

  I think you should read this about Defrag in Vista and you don't have to do it manually.

  The Vista defrag works quietly in the background without intervention on your part

  http://support.Microsoft.com/kb/942092

  In Windows Vista, there are a lot of improvements in the defrag engine and handling of fragmentation. By default, Windows Vista uses Task Scheduler to automatically keep the defragmented hard drive. This Automatic defragmentation does not affect the performance of the Windows Vista operating system...

  If you want to use a much better defragmentation program which is free and where you can see the results, I suggest this one:

  http://www.Auslogics.com/en/software/disk-defrag/

  See you soon.

• time machine updates when the iMac is in sleep mode

  Should I stop using energy saver, when is my time machine backup. In the past, I noticed that when I was copying files copying stopped when the machine went to sleep snd started again when I woke the machine.

  What is there to back up on your computer when it is ' sleep?

  I put my iMac to sleep every night.  Never a question of backup w/Time Machine because there is nothing to back up!

  

• MacBook Pro stops when the lid closes, loses the open tabs and background image...

  Hi all

  I recently had a new hard drive installed in my 2012 13-inch MacBook Pro. I am running El Capitan 10.11.2. Since then, my computer cuts automatically to the bottom when the lid is closed, losing all Web pages, and for some reason, some background, I've saved. (My browser is Mozilla Firefox and it prompts you to restore me the tabs lost, which he will).

  The led standby does not blink or light up when the computer is turned on, it will turn on only at startup. At startup, the login page is displayed, and after that I entered my password it takes about 15 to 25 seconds to load and open my account. What is going on?!

  Summary:

  Stop when the lid is closed,

  Loses the background image & open Web pages.

  Standby blinks only when starting,

  Time of loading extended after logging into my account.

  Any help would be greatly appreciated! Thanks a lot for reading.

  uhlexia wrote:

  Hi all

  I recently had a new hard drive installed in my 2012 13-inch MacBook Pro. I am running El Capitan 10.11.2. Since then, my computer turns off automatically when the lid is closed.

  Take it back to the repair as well as your receipt of repair shop.  Apple has a 90 day warranty on all repairs.

  

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite Pro L10: CMOS clock stops when the OS is not running

  Hello

  We know a reason why the cmos clock would stop when the operating system does not (phone off), the laptop is 18 months old, I've updated the bios tries to give him a good boost, but no effect, he was also in charge for 24 hours.
  Any advice would be great.

  See you soon
  Paul

  Hello

  Usually if the BIOS date/time is wrong and always changes, the RTC battery which is mounted on the motherboard fails.
  In this case the CMOS battery needs to be changed or maybe only removed for awhile

  If your laptop is 18 months, the guarantee must be valid.
  Generally if you have registered on the page of Toshiba notebook the warranty covers all repairs for about 2 years (24 months).

  In this case, I would recommend contacting ASP in your country, because the technician must be able to solve this problem very easily.

  Good bye