IPad no charging current after the update to IOS 10, when connected to the laptop.

My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.

PL suggest how to overcome this problem.

Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support

Tags: iPad

Similar Questions

  • iPad no charging current from the ios10

    Since the update my iPad Air2 ios10, it still doesn't load and I get the message "not charging" at the top of my screen. I use an original Apple cable to load of the main outlet on the wall.  I haven't opened a discussion online with the support of Apple last night but he expired before that my problem has been resolved.  Is there a solution to this?

    Thanks for any help.

    Hello. Should work. Using the original Apple charger for your iPad? Note that the message shows in fact that is not supported at the optimal rate. Your iPad is load, only slower than ideal.

  • iPad will not restart after the update iOS9.3. Should force us the reboot?

    iPad will not restart after the update iOS9.3. Should force us the reboot?

    By restart do you average will not turn on?

    There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

    Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

    You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

    http://support.Apple.com/kb/HT1414

  • my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

    my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    Once iTunes to work properly, you should be able to fix your device.

    TT2

  • My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

    My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

    Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

    Where do you have the phone first?

  • IPad no charging current when it is connected to the computer, said

    Original title: why ipad indicates no current when charging connectd to computer

    My iPad needs to be reloaded, but when connected to the PC with the cable apple, says iPad not charging. Someone knows why?

    This is quite normal.  Apple has designed the iPad to the only charges when it is connected to a charger taken approved or to a USB port of high amperage only found on Apple iMac and MacBook products.  If you connect it to a PC port or non - Apple USB it will not load.

  • Satellite Pro A300-15 t does not restart on the current after BIOS update

    Hello

    There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

    After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

    But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

    So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

    And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

    Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

    30/07/08
    Update the BIOS
    This Bios update adds functionality to your system.
    Satellite Pro A300 Toshiba of 3, 60 - WIN

    So please help me to solve the problem.

    Thank you best regards &,.
    Manjit M.

    Hello

    Try to update the BIOS again
    In addition, access the BIOS settings and set the default parameters. Save it and try again.

    Good bye

  • iPad no charging current

    Two of my iPads suddenly started poster "do not load" in the upper right corner recently.  A mini iPad 2 that was barely 1 month began to do this two days after hanging to a charger for the afternoon, and just tonight, I opened my iPad Air until you find that is now doing the same thing.

    Both of the iPads are plugged to wall Chargers using the charger and the cable supplied with the iPad.  We have several devices Apple here in the House, so I made sure that the iPad 12W charger is used.  I also tried to hang the iPads up to different Chargers with the same result.  Other iPad and iPhone load fine on all our Chargers.

    I tried to do a full reset on the iPad mini and has no effect.  At the end of the day, I went back to Costco, thinking it was defective, only to now find my iPad Air which I had for about a year is the same thing.  This cannot be a coincidence.

    We had no problem with these iPads until the upgrade to iOS 10.  I upgraded the iPad iOS 10 mini and the problem started occurring about a day later.  My iPad that air has fonctionnee iOS 10 for almost 2 weeks now, I think, and it just started tonight.

    There seems to be a problem with iOS10. Just going by the threads on this forum, Apple seems to have changed the minimum acceptable input power.

    It doesn't seem to be much users can do but wait for a fix.

    Even though it says not charging, let it set out with the screen and see if it is supported.

  • If register for 10 free images, when my account will be charged? After the last 30 days?

    Or will I have to pay immediately?

    It will be charged immediately, but the first payment will be refunded.

  • Still having problems with Itunes after music updated to iOS 9.3.2

    How can I solve the problems created by the software update Apple iOS 9.3.2 lost all my music will not restore using itunes etc

    What questions are you talking? Music of Apple, it's where you posted what you use? What music has been lost? It's all in your Apple's music. The rest should be in your iTunes library on your computer. I have almost 2K songs in my iTunes library and they have all been there since the very beginning, across all iOS and iTunes updates.

    What happens when you try to restore your phone to iTunes? What it the music has to do with whatever settings you have for music and once again, depends on your participation with music Apple or any other service.

    Try it please take a moment to build a question, describing what occurred, what device you use, what computer OS you use, and what troubleshooting steps you tried to correct. In addition, you use the services of Apple, and have you backed up your phone and your computer.

  • Windows 8 do not repair after the laptop broke down (my husband HP G60-125NR)

    Bought the upgrade of software online to win November 7, 2012.  PC has had several problems with HDMI on the laptop.  It would break and then we would get running again.

    Yesterday, my husband went to turn on his laptop and it crashed completely.  I created a bootable cd to download Win 8 we bought.  On reboot, we were happy... but not for long.  The repair feature would not work... no reason given.  It does not restore options, nothing works.  I went several forums to find a solution.
    Finally, we decided to reinstall windows and he said, it would not be installed because the PC is locked?  Frustrated!
    Tried once more and I have a message "Windows didn't prepare the computer to start the next phase of the installation."  To install Windows, restart the installation.
    Error:
    File: \Boot\BCD
    Status: 0xc000000f
    Boot your PC Configuration data is missing or contains errors
    Can anyone help with this?  My husband had some work/Word documents that he wants to save, and alas, he fears that he will lose all.  What choices do we have?  Don't forget, repair, restore and reset functions are all not working is not for us.
    Any help would be appreciated.

    I come home and I tried the option you provided.  Thank you by the way.  I can't get past the first command prompt:

    BcdEdit/export \BCD_Backup C: (where BCD_Backup is the location where you want to reside) and press ENTER.
    (is there a letter or another command I should type after the backup of the word?  When I type in prompt up there, it indicates that the setting is incorrect) command prompts are confusing to me.
    I also shows that several facilities of Windows see examples:
    [1] C:\Windows.old.000\Windows
    [2] C:\Windows.old.001\Windows
    [3] C:\Windows
    At this point, I'm afraid that I won't get it her husband pc so that it starts.  It is a constant reboot and loop, I've been in the bootrec files and he says it has repaired, but in vain.
    See the messages in the refresh, reset and repair options:
    'Refresh' option and the message "the drive where Windows is installed is locked.  Unlock the drive ad try again".  How can I unlock a drive that would not even start?
    'Reset' - impossible to reset your PC.  A required disk partition is missing
    "Repair" - automatic repair couldn't fix your PC.
  • Error code #2000-0142 after the laptop is a Dell fall.

    Original title: I have a Dell Inspiron 1545 with Windows 7 x 64 which does not load windows.

    No new software or configurations have been added since this problem started about 2 weeks ago.  However, the laptop fell.  I was able to run the system diagnostics by pressing F12 at startup.  All retired except for one hard drive tests (DST short Test), who has found the error #2000-0142.

    I know that some forums suggest that the error refers to a bad hard drive or corrupted.  But others have had some success in trying the installation CD/DVD.

    Basically, the computer crashes windows tries to load/startup and I get to the blue screen with a dove and the leaves of some green in the background and a mouse cursor that works.

    I tried several methods of recovery without success. Whenever I find myself on the same blue screen.  I inserted the DVD FAB with the Windows installation/recovery.  I tried installing but the computer froze in the process.  I'll try the repair option, but the computer is frozen on the System Recovery Options. The menu lists the hard drive, but the compputer seems to be stuck trying to figure the size of the partition with.  Is there a problem if I tried the method of installation first, before you try the repair option?

    You will need to replace the hard drive.

  • Having just updated for Firefox 4, when connecting to secure padlock GIS Web pages, n doesn't seem anymore. If anyone else has noticed this?

    Having just updated for Firefox 4, by connecting to a Web page that is secure, the lock sign does not appear. Any body noticed it?

    The lock is no longer a part of Firefox; It can give users a sense that a site is secure by not providing all the information related to a site. Familiarize yourself with the Site identity button in Firefox:

    You can install an add-on to display a padlock in the URL/address bar:

    You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

    • Adobe Shockwave for Director Netscape plug-in, version 11.0
    • Adobe PDF plugin for Firefox and Netscape
    • Shockwave Flash 10.0 r42
    1. Check your plugin versions on one of the following links:

    2. Update to Shockwave for Director
      • NOTE: this is not the same thing as Shockwave Flash; This installs the Shockwave Player.
      • Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place, so you can find it).
      • When the download is complete, exit Firefox (file > exit)
      • Locate and double-click it in the installer that you just downloaded, let the complete installation.
      • Restart Firefox, and look at your plugins.
      • Download link and more information: http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    3. Update of Adobe Reader (PDF plugin):
      • Within your existing Adobe (If you have already installed) drive:

    • Open the Adobe Reader program in your list of programs
    • Click Help > check for updates
    • Follow the instructions to update
    • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
  • Download the full installer (If you have NOT installed Adobe Reader):
    • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox
  • . Run the Setup program that you have just downloaded.
  • Use one of the links below:
  • After installation, launch Firefox and recheck your version.
  • Update the Flash plugin to the latest version.
    • Download and SAVE to your desktop, so you can find the Setup program later
    • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
    • Once the download is complete, exit Firefox
    • Click on the installer, you just download and install
      • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
    • Launch Firefox and recheck your version or up to the download link below to test the installation
    • Download and information: http://www.adobe.com/software/flash/about/
      • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
      • Use IE to go to the site above to update the ActiveX to IE
    • Download manual installers.
  • USB transfer does not not for iPads on VM Mac after the last update?

    Hello:

    I have a VM 10.10 that I use to manage some iPads to the Department via the configurator to Apple.  After 8.1 update, I can't have iPads to connect regularly.  When I get to get an iPad connected and try the update, it will not reconnect.  I tried changing the settings of relay USB connect only to the virtual machine, but nothing helped.  This happens also in iTunes.

    Anyone else have this or similar problems?

    Hello

    Thanks for the posting. This problem can be reproduced on my laptop with the iPhone. Sorry for the inconvenience.

    I reported this problem to our development team. If there are no updates to this topic on this page will keep you informed.

    Thank you

    Tim

  • After recently updated to Windows 7, cannot connect with the Microsoft Bluetooth 6000 keyboard.

    Original title: Bluetooth Microsoft 6000 keyboard installation

    I recently updated my WIN 7 and since then I could not connect with the keyboard. I am able to recognize and enter the numeric code and the keyboard will appear on the list of devices in the control panel. After that, the Red/Green flashing on the remains of the keyboard and the device disappears from the control panel. Any suggestion would be appreciated!

    Hi CliveOshry,

    You can try the following steps and check if it helps:

    Method 1:

    You can try to download and install IntelliType Pro 7.0 depending on the version of Windows you are using.

    For the 32-bit version: Download IntelliType Pro 7.0

    For the 64-bit version: Download IntelliType Pro 7.0 for 64-bit

    Also check if there are optional updates available for the keyboard in the windows updates.

    For more information, see the articles:

    Automatically get recommended drivers and updates for your hardware

    Update drivers: recommended links

    Method 2:

    You can review the article and check if that helps:

    Resolve the failure of mouse or a Bluetooth keyboard to function

    Method 3:

    You can try to run the hardware troubleshooter and check if it helps

    Convenience hardware store

Maybe you are looking for

  • Satellite A660 - software DVD 3D works expired or is secretly changed

    Whats going on; Why lynched to pay an extra $59 for software to do my work in 3D satellite? Ok.This probably sounds nuts; but my software DVD Blu - Ray Toshiba seems to have a DVD/Blu-ray inside prevention program. Prevent 3D questions and smaller. I

  • Satellite A200 - boots motorcycle cycle Post - in touch with Toshiba tomorrow

    HelloI have a Toshiba Satellite A200 when start does not get past the message, get you the commercial display of system "In Touch with tomorrow Toshiba" press F2 or F12 for the boot of friends menu. The blue bar get about 3/4 of the way through, then

  • HP touchsmart 520 screen freezes.

    I go to Task Manager and get the mouse working again, but just by using the touch screen stops after a few keys. No error message is displayed. Everything seems to work ok. Any help much appreciated.

  • Language bar is gone and not coming back

    I seem to have lost my language bar. I don't know if I still never had it but I need it now and I'm not. I used to pass to the Chinese for some reason any, although I never (thought), I installed, when I hit the shortcut key. I want the Korean keyboa

  • Trend Micro Internet Security will not uninstall

    I have a new Windows 7 Professional 32 - bit Latitude E6500 that drives me crazy. It came with a trial version of Trend Micro Internet Security installed and it's not far, at least not with elegance. Here's what I've tried so far: Uninstall via progr