IPad no charging current when it is connected to the computer, said

Similar Questions

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

• drive external hard when it is connected to the computer says hd not formatted want format you?

  drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

  Hi keo1,

  We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
  See check your hard drive for errors

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Perform a hard reset when you are connected to the computer?

  Hello

  my iPod Touch G 6 seems to have momentarily buggy so I connected it to the computer, after he had died and needed a charge. He didn't start the loading of the iPod screen, so I did a hard reset while it was still connected to the computer. When he turned his back, I had to enter the password on the iPod to unlock the screen before you start synchronizing with the computer.

  Desire to do harm to the iPod? I accidentally unplugged before ejecting several times, so I'm just scared.

  Thank you

  Jesse

  You have no damage to the iPod. If you disconnect the iPod is communicating with the computer, then you can alter the iPod and a restoration will probably be necessary,

• Help! The files do not appear on the rocket when it is connected to the computer

  I brought all my library Windows Media WMA and mp3s on my rocket using auto when I got it. For some reason, the "rocket" do not place files in the music folder or elsewhere, that I can find them when it is connected to my computer. The music folder is empty. The files appear on my rocket only when it is disconnected! It's a pain to remove things quickly. I really want to sort through hundreds of songs and remove them manually one at a time to make room for the new. Can someone please?

  I'm about to use my magical powers of intuition here.

  Look in settings/USB Mode. Auto-Detect, right? (Please limit your applause.)

  That's your problem. It detects a different USB mode for each computer.

  There are two modes USB, MSC and MTP, modified through parameters. There are also automatic detection, which goes to the PSG first, then of MSC if there is no player Windows Media on the computer.

  A computer can see a way or the other: just just the MTP or MSC.  The "rocket" sees all.

  DPW works with Windows Media Player. This is prbably that you have configured on your PC.

  MSC works as a generic flash/thumb/disc player. This is how you connect to the Mac.

  Solution: Connect to the PC and move the files of the "rocket" to the PC.  Change MSC mode and put them on the "rocket" in MSC mode.  When you connect to the Mac that they will be there. And when you connect to the computer, they will be there as well - but now you will see them in MSC mode.

• Sansa E280 going to update the database when it is connected to the computer

  Hello

  Just at the moment where I was getting things straightened on my drive and everything was working fine, I plugged my E280 on my computer and it says "Refresh database" on the player and my computer does not see the E280.

  I've been looking around on the forum, and there are so many different options to try (of: delete the SYSTEM folder, which I was told not; to turn off the drive and engaging the hold button and the button to rewind when connecting to the computer, etc., which I tried ~ nothing; take off Firmware and put one on; do something in Recovery Mode) , which I have no idea how do; etc.).  Sorry, but I hope you get my point... What do I do?

  Thanks for any help once more.

  Thank you clu31355.  I tried the very first thing that you said ' put in operation and allow it to update the database (if desired) before you connect. "and voila - it worked.

  These Sansas seem to be quite ticklish - who knows what will happen?

• BlackBerry smartphone how to stop the charge battery when it is connected to the PC?

  Hi guys, anyone know how to prevent the battery charge when the BlackBerry device is connected to the desktop via USB Manager? TKS!

  boldberries wrote:

  and I heard that it is bad recharge the battery when it is completely full.

  No good info. It is always good to overflow of a charge.

  Here's some good advice from loading, please read and you will see that many of them will be applicable to you.
  http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/

• Profile of blackBerry Smartphones Sound changes when loading or connected to the computer

  I immediately noticed on my BB Curve when it is plugged into the charger or hooked up to my computer, which changes the sound profile. It's frustrating because I don't know what is happening because this isn't my normal sound profile.

  Is this a bug? If anyone else has noticed this?

  Is there a setting somewhere that I missed that causes this happens on my phone? It's my third BB and the first time it happened to me.

  Thanks in advance for your answers.

  I was going to suggest to try first, maybe they have an option to fix it properly but which could stop him doing what's done

• Take pictures when you are connected to the computer

  I have a Sony dsc-hx5v. I cover basketball and want to be able to take pictures while I'm connected to my computer via USB. Otherwise, the process of unplugging and plug makes the system must update itself, blah blah blah.

  Is it possible to take pictures while only connected via USB and photos automatically fill in PMB?

  
  

• IPad no charging current after the update to IOS 10, when connected to the laptop.

  My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.

  PL suggest how to overcome this problem.

  Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Help! Fuze heats up when it is connected to the pc...

  Hello

  I recently bought a 4g version black Sansa fuse and I got a little nasty gets hot problem-it when it is connected to the pc or the USB power adapter.

  I know that some readers mp3 or other devices can become hot during charging, but I really don't think that the above 50 ° c temperature is normal (since its even hotter tham my GPU...). Ive noticed a post on anythingbutipod.com where a guy had a same problem, so I just want to ask a few questions he did: is there the "anyone else having this problem as well? Should I worry about this? »

  BTW. My sister uses the same pc (even the same USB port ) to recharge his Creative Zen Stone and it does not seem to warm up. Oh, and the USB power adapter I have has the following specifications output: 5.0V +/-0, 1V and 150mA to 1000mA

  Thank you in advance... and sorry for my bad English (if its bad )

  It is not normal, please contact technical support for replacement or return it.

• How long it take restore iphone when connecting to the computer

  How long it take restore iphone when connecting to the computer

  Is based on the amount of data to restore. How long do we have?

  GB

• Satellite Pro C70 - could not get the image when it is connected to the projector

  This machine has been purchased for use in the classroom with projector and smart board. When it is connected to a monitor, the second screen works fine, but when it is connected to the projector DLP Epson, the computer screen and the projector are the two laptop PC empty of other manufacturers of work correctly when it is connected to the projector.

  Can you help me?

  Message has been modified: name of the laptop has been added to title

  What laptop do you speak?
  .. .and what operating system is preinstalled on this laptop?

  You use the pre-configured Toshiba system?

  Is the resolution of the screen for both devices (display and external monitor) set correctly?