IPad pro cable loading safely able to charge phone more than 6 s.  I noticed that it is thicker than the iPhone cable

Similar Questions

• It is the charger supplied with the phone. But my iPad charger is more than 2 years works great on my phone. What's wrong

  Whenever I plug my charger into my iPhone more 6 seconds I get a pop that says this accessory may not be recognized and will not take a charge. It is the charger supplied with the phone. But my iPad charger is more than 2 years works great on my phone. What's wrong? And why won't my charger. I also have another charger at work that the phone recognizes even plug me the charger in but that works well on a co-workers phone. Suggestions?

  Help here > power adapters using iPad with iPhone, iPad and iPod - Apple Support

• I just signed up for the storage of more than my iPhone. I buy separately for my iPad?

  I have just signed up for the storage of more than my Iphone... I buy separately for my iPad?

  < re-titled by host >

  iCloud-storage can be used by multiple devices as long as they use the same identifier Apple to settings > iCloud. The main orientation of iCloud's for the synchronization of data between the devices.

• iPad pro icon load acting strangely.

  Since iOS 10.0.2 was installed when I charge my iPad Pro 9.7 "icon at the top right seems to act differently.

  Before the iOS update when I plugged the cable into the icon would change from the percentage text and a white bar for the battery to a green bar and the prosecution would progress (sometimes the text would update) and move the green bar. When 100% has been reached the green bar would be change in white and below it would say not charging.

  It seems now the green bar works fine, up to 95%. So if the iPad goes into 'sleep', when I wake up it it says NO charging current, but there the text usually is greater than 95%? If I pull the rope and reinsert, the bar turns green, but at some point he indicates NO CURRENT charging or the screen goes black and when awakened it indicates NO CURRENT charging.

  However, once it reaches 100% now STAYS green bar? He turns not white nor the State DO to RECHARGE not?

  I do NOT use a standard charger, but an Insignia desktop charger. This has worked for me for years without problem? Even on this iPad Pro (and an iPAD 2 and 3 in the past).

  Ideas? Code modified to load differently to avoid overheating of the battery? My charger is a failure? Do not recharge the iPad is slower than before?

  Confused...

  Hello. They changed the logic that monitors the loading. As you say, everything works as before. If you use the original charger, that it should behave normally, because it will receive a higher current (faster loading).

• IPad Pro 1st gen is no longer charging via rMBP end 2013.

  IPad Pro 1st gen is no longer the load via rMBP end of 2013 after the Ipad pro iOS 10.0.1 update

  can someone enlighten me on this issue? Apart from the iPad pro requires a larger draw of power than an iPhone.

  Thank you.

  I ask as its just designed by using redundant DuetDisplay and I need a complete battery to use the ipad as a second display now...

  Try alternative ways to charge your iPad here > If your iPhone, iPad or iPod touch won't charge - Apple Support

• Second battery charge no more than 29% on Portege R200

  Hello

  I borrowed today from a friend (who has a Portege R100) its extra battery pack, model PA3155U-1BRL. Unfortunately, when I put it on my R200, it started to load, but stopped at 29% and does not load above this percentage. I also have another identical extra battery pack which I bought with my laptop and it loads and works very well, so it's not a computer problem for sure.

  I also tried to remove the battery main the Portege and do work only with the pack extra battery (faulty), but without success. Yet once again, the same problem occurred. 2nd battery charge indicator LED turns on for a minute or two and then turns off and the battery stops in charge, as I can also see the power management in windows, where the battery is shown as "On Line" when the laptop is plugged into the charger a/c and "Évacuation" when the laptop runs on the battery alone. In all cases, the battery is over 29%.

  Given that Li - ion batteries don't suffer no "memory effect", you have an idea of what is happening and how can I deal with it?

  Thank you much in advance.

  Hello

  Looks like a malfunction of the battery to the battery performance and life is limited
  After abut 500 times charge and discharge procedures the battery will discharge slowly performance.

  I think that you should simply replace the battery with a new and check if it helps to solve your problem!

  See you soon

• Tablet not charging no more than 5%

  Looking for some advice... my tablet is only 4/5 months old and has recently stopped more than 5% of charge, even if it remains cool during the night

• Why use my original USB cable charger for more than a year now is startig to show a sign that it is not compatible with the device? o

  I used without problem my USB cable for over a year, it is original Apple and yesterday began to show a sign that it is not compatible with the device. How can not be supported if it's Apple.

  This can occur if the cable is damaged in any way. See: recharge your iPhone, iPad and iPod touch - Apple Support for more information.

• My iPad has been verification of operating system update for more than 3 hours.  Not able to do anything. Cannot cancel or turn off the power. Help please.

  MY iPad has been verification of update of the new version of operating system for 3 hours.  Unable on camel back or cut off the power supply.  What should I do? o

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears.

  Then go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete. Then go to settings > general > Software Update and try again.

  If that doesn't work, try updating through iTunes on your computer.

• WMP 12 albums on entry each time charging takes more than 1 hour to load

  I uninstalled and reinstalled according to the suggestions on the internet without success.

   

  Hello

   

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Windows Media Player takes more time to load the albums.

  This can happen due to the interruption of some third-party programs.

  I suggest that you put the computer in a clean boot state and check if the problem persists.

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the mentioned site:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Apple Watch without charge for more than 1 month.

  So I have not loaded my Apple Watch in 1 month, and when I tried to load, I loaded 3 days in a row and it still won't turn, no, it is not the charger, I tried force restart with digital Crown and side button and still nothing, then I was stupid enough to cancel the twinning of the Apple Watch with my iPhone thinks it would work somehow , and now I can't reset it, so dumb. I can't connect to iTunes either, I'm so lost and confused, I just had this Apple Watch for about 2 months for my birthday and I don't know what to do. I have tried every thing on the web to force reboot to restore the entire Apple Watch. Please if anyone knows, please tell me, literally I am desperate for your help, thank you in advance.

  Hello

  Given the steps you've already tried, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

  Contact - Support official Apple

  https://Twitter.com/applesupport

  http://www.Apple.com/retail/Geniusbar/

• Satellite Pro M40X - can not read MMC - SD card more than 1 GB

  Hello
  I have a Satellite Pro M40X but it read only MMC/SD with a capacity of 1 GB. If I try with 2GB or 4GB nothing appens. What can I do? What drivers I try to upgrade to Windows XP to be able to read cards up to 4 GB?

  thanx

  Hello

  The drive will not read the 4 GB SD card due to hardware limitation!
  CA? s not a software but a hardware problem!

  Even you will update the driver, it will not help get the 4 GB SD card running!
  I recommend to use an external card reader which can be connected to the USB port!

• When I start my laptop Vista loaded, I get 'Please Wait' for more than 2 minutes sometimes. What does Vista behind my back?

  I have a Toshiba laptop with no extra or odd options, this is the case whenever I start and it's annoying when Vista was announced as being quick to start.  This small circular thing continues his tail for up to 4 minutes while the 'Please Wait' shines.  Very unsatisfactory.  I also bought the best virus/malware protection money can buy, at least that's what they say, it's a bit like microsoft.

  Check if the same problem occurs if you "clean boot" your system (check this page). This should load Windows Vista without third-party programs. If the startup time is better, then you will need to find or which program is causing the problem.
  However, you can check this page first.

• I bought an annual individual license for Illustrator and also one for Photoshop + Lightroom, now, I realized that I need Acrobat Pro, and need to buy another individual license that will cost me the 3 together more than the creative cloud all opt

  I bought an annual individual license for Illustrator and also one for Photoshop + Lightroom, now, I realized that I need Acrobat Pro and need to buy another individual license that will cost me the 3 together over the whole creative cloud option that includes all applications. Can I Exchange my 2 subscriptions for the rather creative cloud and pay only the difference?

  Single update for all http://forums.adobe.com/thread/1235382 clouds can help

• Load and read XML file size more than 4 GB

  Hi all

  My environment is Oracle 10.2.0.4 on Solaris and I process to work with the XML file as below the detail of PL/SQL

  1. I read the XML file on the HTTP port in the XMLTYPE column to table.

  2. I read value n ° 1 of the table and extract of y to insert another table

  On test db, everything is working but I got below error when I use the XML production

  ORA-31186: Document contains too many nodes

  Current XML size about 100 MB, but the procedure must take over the size of XML file over 4 GB in the future.

  Below are some of my code for your info.

  1. reading XML by line in variable and inserting into table

  	LOOP
  	Utl_http.READ_TEXT (http_resp, v_resptext, 32767);
  	DBMS_LOB. WriteAppend (v_clob, LENGTH (v_resptext), v_resptext);

  END LOOP;

  INSERT INTO XMLTAB VALUES (XMLTYPE (v_clob));

  2. read the value of the cell in the XML column and extract to insert into another table

  	DECLARE
  	CURSOR c_xml IS
  		(SELECT trim (y.cvalue)
  			FROM XMLTAB xt.
  				XMLTable ('/ Table, rows, cells, cell ' PASSAGE xt.) XMLDoc
  				COLUMNS
  				cvalue	VARCHAR (50)	PATH ' / ');

  :

  :

  BEGIN

  :

  :

  	OPEN c_xml;
  	SEEK c_xml INTO v_TempValue;
  		< generate the insert statement in another table >
  	OUTPUT WHEN c_xml % NOTFOUND;
  	NARROW C_xml;

  :

  END

  And another problem is performance problem when the XML file is great, first step to XML content loading to XMLTYPE column slowly.

  Could you please suggest any solution to read large XML file and improve performance?

  Thank you in advance.

  Hiko

  Finally, change us source file to XML, CSV format and instead load the XML using SQL Loader.