iPad Pro takes so long to load! Any tips?

Similar Questions

• Everything takes so long to load always worked so far great

  I have an ipad. It worked very well in the past.  All of a sudden it takes so long to load

  All of a sudden it takes so long to load

  What you're trying to load?

  What have you changed recently?

  What are you doing time you turn on until the problems?

  ---------------------

  If you have problems with the applications of stalling or crashing,

  double click on the "home" button

  -slide up on applications to force leave their

  Re-boot ipad.

  Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

  https://support.Apple.com/en-us/HT201559

  Force power down if above give it trouble you.

  At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

  more information on the re-start:

  http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

  This these tips from MichelPM to improve performance:

  https://discussions.Apple.com/message/29504169#29504169

  https://discussions.Apple.com/message/29504311#29504311

  Restore factory settings by loading the latest version of the ios that will support your machine:

  (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

  https://support.Apple.com/en-us/HT203977

  (2) three methods of restoration of your ipad.  [simple as abc]

  2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

  http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

  2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

  http://support.Apple.com/en-us/HT201263

  3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

  http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

• Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  You should take a look at your startup programs and decide what is really necessary and what is nothing more than useless clutter. There is nothing wrong with the startup programs, some may be really useful or even necessary for your personal needs. But keep in mind that many programs build to start when you start the computer and that most of them must not start when the computer starts, all they do is slow down your boot time and clutter of things when you're trying to solve problems, and some are downright harmful!

  I mean, have you really need things like real Planner and Gadwin Print Screen running all the time? These programs will run very well, even if they are not started automatically every time that you start the computer. Go to these programs and change/disable their boot option. Some may be difficult to kill for public assistance services can be useful when you try to control startup programs. Try CodeStuff Starter, it's safe and easy to use, I think you'll like it, download it here:

  http://CodeStuff.tripod.com/products_starter.html>

  Use AutoRuns to check axis start, Richard:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx>

  Use Cclenar-> tools-> start

  http://www.CCleaner.com/download/builds.aspx>

  I can't tell you what to keep, startup items it is a personal preference, but pretty well all the startup items indicated by CodeStuff Starter are safe to disable, and changes are easy to reverse if you change your mind. Searches for items it shows you and decide whether or not these things are really useful or necessary. Some programs will be started at startup without your knowledge and over time, that list can expand to include useless parasites, part of good computer maintenance includes regular control of these startup items and the removal of the unnecessary.

  Suggest that you first spread malware as the cause of the problem by following these steps:

  I. - delete your temporary files

  Clean the system (compensation to all temp/tmp folders and included all the content offline, the tif browser, delete the cookies of compensation.)

  Do a disk cleanup. Click the Start button. in the search box, type disk cleanupand then in the list of results, click Disk Cleanup. Better and easier to use - ccleaner.

  Download the basic version (slim) via

  http://www.Piriform.com/CCleaner/builds>

  The basic version (slim) does not contain the toolbar disgusted

  DO NOT USE ANY cleaning of the advanced options. DO NOT TOUCH THE REGISTRY OR TOOLS. At least not for now.

  Reset

  II. - have your system scanned as a result of security/antivirus installed.

  III. - download, install, update and run both of these tools to a-squared free scans:

  MalwareBytes anti-malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  UTC/GMT is 18:16 on Wednesday, January 18, 2012

• My computer became very slow (startup takes a huge time and even my internet browser takes too long to load.

  Original title: slow down the computer

  Hello world

  I am running a Win7 on an hp w1858 pavilion. My computer became very slow (startup takes a huge time and even my internet browser takes too long to load. I use Google Chrome btw)

  I also have Norton Security Suite via Comcast which shows that my system is clean, so I don't really know what the problem is. I would be grateful :) all tips thank you

  Yes svchost.exe is eating all your cpu about

  Cause the most common was that the windows update system stuck

  Please go to start and Panel and Windows updates

  On the top left click on change settings update.

  Switch to never look for updates,

  

  

  After the above, restart your machine.

  After reboot see if these updates are installed if not install it.

  KB3161664 main download page

  https://TechNet.Microsoft.com/library/security/MS16-073

  Win 7 32 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52823

  Win 7 64 bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52794

  Same deal with it if it is not already installed

  Main download page,

  https://support.Microsoft.com/en-us/KB/3161608

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976

  Win-7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974

  Once the two of them are installed,

  Change your settings to update them and manually check the updates, if this is not after the passage of the parameters and save the changes.

  

• Logic remotely (on iPad Pro) is no longer connected to the iMac GarageBand

  Is no longer able to connect to my iMac using distance, just put logic to update on my iPad Pro. It worked before the update only a few days ago... Not excited about it, however, I find the GarageBand update for iOS very useful.

  Someone else has problems of connection on their Mac or iMac using logical iOS remote?

  A little more info... Looks like my iPad 2 Air is able to connect to the iMac, but not the iPad Pro, even if two iPads running the same version of iOS and have the same version of the logic of distance!

• WebUtility question, forms take so long to load.

  Hi Experts,
  
  I am facing problem in loading of a form that is configured with webutil_106
  My environment is as below
  Version
  =================
  Version 10.1.2.0.2 forms
  Operating system
  =================
  Client: = Microsoft Windows Xp
  Server-side: = Microsoft Windows Server 2003
  Java Runtime
  =================
  Oracle JInitiator: Version 1.3.1.22
  &
  JRE (build 1.6.0_24 - b07) (same behavior on the two runtimes)
  Database
  =================
  Database is placed in the same network (LAN)
  
  I already posted the question on the forum
  
  Re: Forms takes so long opening.
  and
  Re: Java Runtime Security warnings
  
  Please suggest me a solution, I will be very thank you to you all
  
  Concerning
  Zafar Iqbal
  
  Published by: Zafar Iqbal on April 13, 2012 15:00

  Have you checked the metalink notes: [ID 402180.1] & [785340.1 ID]?

  Published by: 929791 on April 26, 2012 02:12

• The IPad Pro. I don't get any sound alerts for e-mail and messages. That it is configured to do what other iPhone and iPad give sounds very well?

  When I get messages and emails on my iPad Pro that I don't get a warning sound as I can with my other iPad 3 and iPhone. As far as I can tell my 'Pro' is exactly the same as the phone and the other, then why not alert sounds?

  You have cut through the center of control of notification sounds: turn on Mute and Orientation lock on iPad Pro, mini iPad or iPad 2 Air 4 - Apple Support ?

• iPad pro independence, how long?

  I am interested in the number of hours everyone is currently done on the iPad pro? My best is 15 hours. The brightness is set to a little less than half. I have app updating in the background off the coast and push and the location of the settings as I do not really use them. Notifications concern the iMessage, FaceTime, calendars and reminders.

  ASO, I read in another thread that you need to calibrate the battery of the iPad a new. Is this necessary? And how do calibrate you a battery? im running iOS on iPad pro 128 gb wifi/lte 9.2

  Hello

  I don, t have the ipad pro, but I found also turn off

  Updating in the background apps on all apple devices

  Gives you 3/4 hours more autonomy.

  See you soon

  Brian

• Contact book P70 it takes too long to load

  I have lenovo p70 is good phone, but I face a problem since a few days when I opened my contact book it is taking too long to load contacts which is stored in my phone

  Note from the admin; subject edited to better reflect the problem

  
  

• Visual Studio 2008 Pro takes a long time to start after the installation of measurement Studio 2009

  After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.

  I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out.  I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).

  Just curious if anyone has encountered this kind of slow startup time and found a solution.

  Thank you!

  I found an article referring to a question similar to MS 8.1.  I don't know if the problem has simply not been corrected or why I am still having this problem.  Workaround "per computer" listed in the article solved my problem.

  http://digital.NI.com/public.nsf/allkb/18E25101F0839C6286256F960061B282 I have

• First pro takes a long time to open

  Hello

  I recently installed the latest version of first (2015.4) on a Windows 7 x 64 service pack 1.

  Config: Intel (r) CPU Xeon X 5660 2.80 GHz 2.80 GHz (2processors).  -40 GB of RAM

  There's a blackmagic decklink which works well with the first. An internal RAID5 have been added to the computer.

  When I try to launch the pro first by clicking on the icon or open a project, the startup screen and load the stuffs, everything looks good. When he writes "initialization of the application", the splash screen disappears. The first pro icon is not highlighted more. Adobe Premiere pro is still in process in the Manager list task. Nothing happens for 10-15 minutes. After that first pro appears and everything works in it...

  I cleaned the trash prefs and uninstalled, reinstalled Premiere pro.

  He not take this time early in the week, he was quick and direct. I don't have this problem for other adobe (for example media encoder) applications.

  Thanks in advance to pay attention to my problem.

  A few thoughts that come to mind are to check and remove any third-party firewall and antivirus.

  You could also try creating a new user account Admin and see how it works there.

• XP pro takes a long time to stop

  Recently Win XP Pro SP 3 take about 15 minutes to stop.  It is not only once, after an update.  It's every time!  It is not sensible.  Anyone has idea how to solve this problem?

  Thank you

  http://www.aumha.org/win5/a/shtdwnxp.php stop, but problems can help       

  Please provide the following information, the make and model of the pc, current anti-virus, any error in Event Viewer?

  Also perform the following to make sure that the pc is clean:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

• HP DV7-1020EA takes too long to load, when the Bureau before being able to use windows Vista 64 bit

  HP Pavilion DV7-1020EA

  Last update of BIOS/CMOS

  Vista Home Premium 64-bit

  Watermark factory recovery

  All the appropriate HP update & Windows Update installed

  Adobe Flash & Sun Java installed

  Removed bloatware

  Tried Msconfig and disable all startup with no improvement items

  Intel Centrino 2

  NVIDIA PureVideo HD graphics card

  HDMI & eSATA

  Problem: Booting into windows is OK a tad slow ish but it load the Office once it takes forever to load before you can get along with just about anything.  As you can not connect to the Internet until the Office has charged.  I don't think its something in the system tray causing lazy loading.

  Any suggestions what to try please.

  See you soon

  Steven.

  Hi Steven,

  It should not perform the function of the buttons on the capacitive Strip if you disable Task Scheduler fast player - however another option would be to put the service to start manually instead of automatically when Windows starts.  To do this, first enable the service from the msconfig services tab, apply the change and then reboot the laptop.

  When windows has completely recharged (it will probably slow again), open windows control panel, open administrative tools, and open Services.  Find the Task Scheduler player quick entry, right click and select Properties.  In the drop-down list next to Start up type, select manual, then click on apply then Ok to save the change.  Restart the computer for the change to apply and see if the time it takes to get a usable desktop is always good - if this is the case, then I'd leave the QPTS function defined in the manual.

  Kind regards

  DP - K

• Trying to export to MP4 but first pro takes to long.

  I try first pro for the first time. I need to be able to export the video to MP4. exporting the video finally but takes too much time. about 15 minutes to export a 13 minute video. each export starts just fine until the file reaches 100% then it is only here for a long time before finally to complete the export. is it because of my computer? Using a windows 7 with a intel core i5-3350 cpu @ 3.10 ghz, ram 64 bit OS 8.g. and a nividia graphics card

  Your hard drive questions helped me to find the problem. the video files are stored on network drives that I have to connect to. I started to export to my desktop and the problem was solved. Thank you for your help...

• PDFs in iBooks on iPad Pro is no longer syn with iBooks on Mac

  Since the update to IOS 9.3.5 I can sync is more PDFs in iBooks on my Pro iPad with iBooks on iMac with OS X 10.11.6. Before updating to IOS 9.3.5, I had no problem of synchronization of files PDF between systems and I have not changed the settings on my iPad or iMac.

  I too had a similar problem with iOS 9.3.5 but now ive not changed in beta ios10 no problem, all my 7 GB iBooks PDFs stored in iCloud etcetera are all accessible once more, apple says no problem, I was the only one with this delema. Everything I've read, this isn't an isolated case.

  Try the vet depending your operating system, or to copy some of the complaints to apple.

  hope that you will also find a solution.