iPad pro volume does not not after update 9.3.4

I just upgraded my iPad 9.7 9.3.3, 9.3.4. pro.  The result is that the volume control does not work at all.  I have a similar problem with my pro 12 "or the iPhone 6.  I tried to restart twice - nothing works.   Anyone else having similar problems and is there a fix out there?

Thank you

You mention trying a "reboot", but there is also a Force restart... try it if you have not yet:

Force the restart (does not affect the settings/data/music/apps/etc)

1. press and hold the sleep/wake button

2. press and hold the Home button

3. hold both buttons until the screen turns off, then back on with the Apple logo.

Tags: iPad

Similar Questions

  • For hp dv7 fingerprint reader works does not after update to 8.1 windows

    Hello

    I upgraded Windows 8.1 Windows 8.  Before updating the finger print reader worked. I used it to connect to websites in any browser Firefox. I also logged into windows with my fingerprint reader and the screen unlocked the same way.

    I have updated all the drivers according to the instructions on updatig before windows 8.1 and after update.  I checked that everything compatible with windows 8.1 again by the instructions before putting up-to-date.

    After that update the drive light will not read the finger scan and the light does not illuminate. I went to the control panel to check the driver and he was later. I ran the windows driver verifier and on the HP site checked for validity sensor driver is up-to-date.  When I open simple passage it says congratulations you can connect in the window by the touch of the finger. When I go on Internet sites I have red cells connected with simle pass, he now seeks to connect with the password "master."

    Any help would be appreciated!

    Thank you

    BattleAngelita,

    Welcome to the HP Forum.

    Does the SimplePass asks your for your master password Windows means that the program has survived the process of upgrading to Windows 8, 1 - somehow.

    You can start with the following:

    • Close all your programs and shut down your computer

      • Unplug everything (little unifying for the keyboard / mouse external can stay)
      • Perform the Hard Reset for your laptop
      • Start the computer and connect
    • Check is SimplePass himself has sorted them.

    ==========================================================================

    You can try to update your SimplePass program to the latest version in the series of version 6.x.

    Before you do this, read and follow the instructions to export your Webcards in your .tsd file.  Regardless of whether the Web site connections are working right now; you need this backup in case you lose your HP SimplePass program (thanks to the complete removal / reinstallation or if corruption).

    Then, consider updating the HP SimplePass program to the latest version 6 series.  If you are already using the latest version, consider other options in the guide, including the "Repair SimplePass" procedure.

    Open the file > click Download > click 'open in Adobe Reader.

    Simple Instructions for upgrade HP SimplePass

    Click on the thumbs-up Bravo !

    It's a nice way of saying 'Thank you' for help.

    While I strive to reflect best practices of HP, I do not work for HP.

  • Webcam works does not after update

    After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

    I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

    After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

    I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

    You can always reinstall drivers even if they are native in Windows. Go to control panel and open the Device Manager. Look down the list of all references to your webcam (video, microphone, etc.). They may appear with a yellow! mark indicating there is a problem with the driver, or they might not. If none does everyone try to enable 'Show hidden devices' in the view menu. For each entry in webcam that you find, right-click on it, select properties then driver. Click on the button that says "roll back driver". The earlier work driver should then re - install.

    If the Roll Back driver option is disabled which means there is no new driver installed. You can always reinstall the driver however. Right-click on each entry in webcam and select uninstall driver. When it is unplug your webcam. Reset is optional, if not plug your webcam into even once (in a port on the computer NOT to a hub) and Windows should re - detect and install the drivers again.

    In case it was an update of the driver who caused your problem when you rolled back each of the webcam drivers and tested the camera working again, go to Windows Update and look for the updates. The problem with the driver should appear again. From the screen to view updates (the one with the details on upgrades), right-click on the update of the webcam driver and select "hide update". After that it shouldn't bother you again.

  • G560 icons on the desktop appearing does not after updating drivers

    Hi all, after updating the drivers on my G560 related to volume up/down icons, and other features appear more on the screen. For example if I turn off audio or wlan (fn + f5) I can't see these icons. Is it possible to restore them? Thanks Giovanni

    re power management - install.

  • Fullsceen Slideshow works does not after update (2015.2)

    Hi-

    Since the upgrade to the latest version, I note that the slideshow widget full screen does not work. He works within the Muse app (although that it crashed Muse sometimes when using), and although it will display with the built-in preview of Muse, as soon as you try to make an overview of the slideshow browser does not at all, it's all white.

    To make sure that it wasn't a problem in conflict elsewhere on my site, I tried to create a new site of the Muse and the only thing that I add to the page is a slideshow full screen and leave all the default settings (photo galleries and everything) and still nothing loads at all except for the next/previous/counter options.

    Hi BLSMagazine,

    As I suggested above, have you tried to view your site on another browser?

    Kind regards

    Ankush

  • Volume works does not after update

    I got a Sansa Clip + for a few years now and that you have never successfully updated the firmware.  A few weeks ago, I did.  Since then my volume isn't all set.  I tried to download the older versions, I can find no change in the result.  Any suggestions?

    I've never seen another example here of a disabling buttons firmware update. And if you have tried other firmware and formatted, you erased all traces of what might make the processor fool you.

    Since you have had for years, it may be something mechanical is exhausting, and it happened to coincide with the update of the firmware.  But it is a strange coincidence.

    You could post your problem to AnythingButIpod, where a different crowd tinker more tuners with mp3 players.

    http://AnythingbutiPod.com/Forum/forumdisplay.php?f=119

    It seems that you're fairly computer-savvy. If you feel geeky and experimental, you could install the firmware Rockbox alternative to www.rockbox.org, which is any other operating system made by dedicated open source DIY. Follow carefully the installation instructions you will be able to uninstall it without problem.   If the buttons don't always work with Rockbox, I guess it's just worn out.

  • Satellite Pro A200 - vertical scrolling on the touchpad doesn't work does not after update

    Hello

    My A200 told me that I needed to update the drivers for my touchpad. I did it and now I can't use the vertical scroll feature. I looked on the site Web of Synaptic and there is nothing there to help. I checked to see if I have the drivers updated and I do, and I've looked through the settings of the mouse and can't find anything that will help you.

    Can someone help me please?

    Thank you very much
    Ian

    Hi Ian

    Why you n t trying to roll back the BONE to this early time?
    I mean the point OS before you installed the touchpad driver

    Usually, this should help to recover the functions first touchpad.

    Best regards

  • For hp dv7 fingerprint reader works does not after updating to windows 8 pro

    I have improved my dv7 with windows 8 preview version and finger print reader perfectally well worked and when I have upegraded to pro it has stopped working. When I upgraded I lost a bunch of programs so can someone help because I loved using my fingerprint reader. Also I have upegraded of windows 7 to windows 8 Preview upegrading to pro version.

    Have you installed a driver of validity? It is necessary before the Simplepass software:

    http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58900.exe

  • Phone no ID number does not after updating ios 10, showing "unknown"

    Hi, I have recently updated to ios 10 on my iPhone 5s, after which my phone in the tab displays "unknown". Also I am not able to change a put my number inside. How to solve the problem? Asked me again activate Facetime and iMessage.

    Hello Milan_Mumbai,

    I think I understand your unknown phone number display in your settings. Also, you are being invited to activate new iMessage and FaceTime. These two issues have started after the update to iOS 10. I know not when it can be on your iPhone is not behave as expected after an update. I'm happy to help you.

    If there is a problem with your phone number in the settings, it could impact the iMessage and activations of FaceTime. First of all, I recommend you restart your iPhone. Restarting may solve many unexpected behaviours. Please use the steps below to restart if necessary.

    1. Press and hold the sleep/wake button until the Red slider appears.
    2. Drag the slider to turn off your device completely off.
    3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

    Restart your iPhone, iPad or iPod touch

    If the problem persists, follow the steps below.

    1. Make sure that you are connected to a Wi-Fi network or cellular data. If you use an iPhone, you will need the SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your operator, you might be charged for the SMS.
    2. Go to settings > general > Date & time and make sure you have properly configured your zone.

    If you get an error when you try to activate FaceTime or iMessage

    Have a wonderful day!

  • App update work does not after updating IOS 10

    Hi guys,.

    After the update my 6plus iphone to IOS 10 yesterday, I have a problem with the update of the applications on the Itunes store. Updates are not downloaded. IPhones shows it starts the download but nothing happens.

    Tried via 4G and Wifi but no difference.

    Help much appreciated.

    Thank you

    TBirdGarage

    Restart your iPhone, and then try again.

    1. Press and hold the sleep/wake button until the Red slider appears.
    2. Drag the slider to turn off your device completely off.
    3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.
  • Add-ons - works does not after update

    Since the update to Firefox 42, I had to refresh it and among a long list of other problems my modules do not work. When I click on tools > Modules I get the error message "cannot find server".

    How to solve this?
    Thank you.

  • Pavilion G6 2342dx, Wifi works does not after update driver recommended

    Hello. I have Pavilion G6 2342dx running Windows 8. Yesterday, I used HP support assistant to perform some recommended driver updates. Among the things to day was the device of Qualcomm Atheros Wifi driver and the driver of HP wireless button. Peripheral installed WIFI was 10... 222, 10... 212.

    After the update, my laptop cannot detect any wifi network. This shows simply 'no detected networks.' I also noticed that the light on the button wifi (F12) is always white If yes or no I activate flight mode or not. I get a message on the screen of property on the change in status of airplane mode. However, it doesn't seem to be actually toggle the wifi because of the sidebar, it looks like wifi is on but with the message "no media detected" persistent. In addition, wifi on the status bar icon is grayed out with a red x.

    I tried deactivating and activating the adapter without success. I tried to download and reinstall the driver (10... 212) with no luck. I even tried to disable, uninstall and then reinstall the device in Device Manager. System restore fails whenever I have it try. Interestingly, the last driver on the HP support Web site is the 212, no mention of the 222 pilot.

    Everyone has experienced the same? I would really appreaciate help on what I am completely stuck.

    Hi @futoji,

    Thanks for all the help. I finally resorted when you run the upgrade to Windows 8.1 and that seemed to take care of the problem.

  • MacBook Pro starts does not after crash

    Hello

    first... Sorry for my English ;-)

    I have worked on my MacBook Pro (early 2011) and the screen was distorting the market. I did a reset hart (by pressing the power button / stop to stop). After that he starts not more. I erased the MSC, the Cache of the NVRAM. Tried to boot in recovery of the Internet. But I get only a blank white screen and the fan at full power. Beginning not more.

    What it could be and what can I do?

    Thank you very much!

    Your MBP is perhaps in this category:

    https://www.Apple.com/support/MacBookPro-videoissues/

    Make an appointment with an Apple store genius bar and tested it.

    Ciao.

  • iMessage works does not after updating iOS 9.2

    My wife has an iPad Mini 4 (Wi - Fi only), and since the iOS installed 9.2 update, she could not use iMessage. It has an Android phone, but use iMessage on his iPad to text me on my iPhone.

    Going to settings > Messages and turn off iMessage worked. We read that a possible fix was to try this, reboot the device and turn iMessage on IT. Well, iMessage cannot be turned on ('switch' is not in the on position). Go to the home screen Messages shows a dialog asking for the activation of FaceTime. She puts his user name and password, and it hangs on. Finally, it returns a message that I don't remember everything now (without the unit in front of me), but something along the lines of FaceTime cannot be enabled at this time. Keep in mind, this is when in the Messages, she has not selected FaceTime.

    If anyone else has experienced this?

    FaceTime & iMessage must be active.

    With the help of iMessage

    http://support.Apple.com/kb/HT3529

    IMessage activation troubleshooting:

    http://support.Apple.com/en-us/HT201422

  • BBM BBM works does not after update

    I've been using bbm well before the last update yesterday, when I updated to the new version (1.0.0.72), messages are not sent more and BBM seems to not work, anyone having the same number or found a fix? Thanks in advance.

    I have it working again, just uninstalled and reinstalled BBM, everything is back to normal now.

Maybe you are looking for