iPad update problems

For weeks after update my iPad I did and now the home button does not work, my keyboard zaag/case does not work and Pandora does not load. The iPad is basically useless for me. There are probably other issues, that I have not discovered that the iPad is not usable. I deleted and downloaded Pandora with no luck

Try a reboot without using the home button. Hold the sleep until you get hit to turn off and power off. Then click on sleep again to wake it up. See if that helps.

Tags: iPad

Similar Questions

  • IPad after update, problems with applications

    After the Ipad update to 9.1.2, we have a problem, whenever we are entering an App, emails, photos, etc., we lose the connection with the application. We will and simply press a button, then let's just out of the app again. We are unable to read the email, see photo etc. Anyone has a solution for this.

    In addition the application which is suppose to update, will not update

    Hello abcglad,

    If I understand correctly, you are able to open your apps, but what you do in them makes it insensitive so you press the Home button to exit the application, and then go back into it to make it work. This looks like a software issue to me, we should be able to solve. I would start by quit all applications running on your iPad. Normally, simply quit the application affected, but in this case because it seems to be all of them, I'd leave all.

    Force an app to close the iOS

    1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
    2. slide to the left to find the application you want to close.
    3. push upward on the overview of the application to close.

    When you have finished that force the iPad to restart with the Home and Sleep/Wake buttons as described in the following article and the question again:

    iOS: switch off and on (restart) and reset
     
    If the problem persists, save your device in iTunes, then restore it like new and verify that it works.
     
    How to clear your iOS device and then set up as a new device or restore from backups

    If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Thank you for using communities of Apple Support, all the best!

  • Adobe Viewer on iPad updates any more

    After a week with no problems display ID6 folios on my computer and my iPad, my Folio Builder arrested folios on the iPad update two days ago. I can always get a preview of my work on my computer - which doesn't really help

    There are 3 ways to get content on Content Viewer a device:

    1. Local preview via the Folio Builder Panel
    2. Pré-publier overview (download titles w/blue banner on the folio cover image)
    3. Overview of distribution (publish it as free/private & download)

    Can you be specific about what you use to display your content? Also, be specific about the updates you make in the document. If you use #3 above, enter your productID and I can watch the backend to see if there is a problem with your document by our distribution service.

    In addition, to potentially win another loop of communication, please ensure that you have the correct orientation filled in each article. If your folio is one Portrait, landscape-single or double direction, each article must have everything in tact for see you the document, resulting in a viewer.

    Please follow up with more guidance on what you are doing and we will talk you through a solution. Thank you.

  • iPad pro problem showing images video and Youtube eBay

    Hi all

    I have a strange problem with my iPad pro (and before that with the iPad 1 air).

    Installation program:

    • Telekom VDSL 50, Telekom Speedport W724V
    • 2 WLAN Range Extenders (1 Telekom, 1 Devolo)
    • iPad Pro and before the Air1 iPad with problem
    • iPhone 6 s more, iPad 2 Air without problem
    • peripheral and peripheral issues no problem have the same WLAN settings
    • everything on the same level of iOS
    • no problem with cell phone, Wifi only!

    Affected applications:

    YouTube and eBay Apps

    problem also occurs when you access related Web sites via iOS Safari, but less frequent

    Problem:

    Applications have problems to load media files (pictures and videos). After a while, network errors occur und sites can no longer be reached.

    Seems it to come in different severities: sometimes I solve the problem by turning WLAN off and back on. Sometimes to renew the lease from network works. Sometimes, I need to turn the iPad and turn it back on. Any action is temporary, the problem reoccur, and more I use the sites, the shorter the time before the problem came back again.

    Does anyone have the same problem? Any ideas or solutions?

    Thank you very much

    I have a similar problem, but only when I am connected to my Wifi extender (via the Powerline) devolo. As soon as I connect to my router directly, the problem disappeared.

    In my view, the problem is caused because recent versions of IoS are more compatible with the Devolo WiFi extender.

    No idea how to fix?

  • Satellite C855 - 2M 1 - AMD graphics driver automatically update problems

    I have a Satellite C855 - 2M 1 and installed windows 8.1.

    I installed the first upgrade of the video driver from Windows update (WDDM 1.2 02/11/2013 9.12.8.0)
    and it works well.

    Lately on windows update has been released a new driver (Advanced Micro Devices, Inc. - Graphics)
    Adapter WDDM1.3 - AMD Radeon HD 7500/7600 Series)
    I tried to update the driver but when windows restarts it does not load the driver and restore the old.

    I tried to manually uninstall the driver and updated, but it fails.

    Any help on this would be much appreciated.

    Thank you
    Andy.

    Hello
    To be honest I m not very well why the autopilot GPU update could not complete successfully, but I guess that the update is not out for the AMD Radeon HD7610M, which is built into the laptop.

    I also read a discussion on this issue in the Microsoft forum, and it seems that there are other people having exactly the same problem with this update.

    [Advanced Micro Devices, Inc. - Graphics Adapter WDDM1.3 - AMD Radeon HD 7500/7600 series update problem | http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/problem-with-graphics-driver-update/a7a6da38-6575-405b-86c2-71a620be06b7]

    The question is therefore probably related to wrong or incompatible driver GPU

  • p6310f: Windows Update problem

    When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

    Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

    Shdocvw.dll "" ""

    browseui.dll   "                "                    "                     "

    MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

    Actprxy.dll Failed is not found

    gpkcsp.dll        "        "           "             "

    initpki.dll          "           "                 "

    wuaueng1.dll"" "

    c:\windows\system32\dllcache\wucltui.dll"" "

    wuweb.dll      "            "           "              "

    muweb.dll    "            "              "            "

    I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

    Hello glockrow ;

    Let me welcome you on the HP forums!

    I read your post about windows update problems and wanted to help.

    I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

    So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

    After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

    HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

    It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

    You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.

    Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.

    What I recommend is the following:
    (1) download and install Macrium reflect (MR)
    (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
    (3) use the option to create a CD or a USB startup key

    NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

    So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • Security update problem - trying to update from McAfee!

    try to install McAfee 2011 3 users Total Protection with installation CD.  After spending the last 4 hours online with them, they claim I have windows update problem - shows up in the history as: for.NETon of a security update windows XP, windows Server 2003, windows vista, windows 7, vista windows 2008... KB2160841.  Finally, they said that the problem of 'failure' to be fixed through windows before my McAfee can be updated? !!! Help!  already four hours online trying to fix! :(

    See Andre.Ziegler response to a previous post, involving the KB:

    Error: WindowsUpdate_00000002 when installing .NET Framework 4 (KB2160841)

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/07e67bc5-1841-4972-Bac4-7a1d81dba8e7

  • Update problems - how to prevent an update available

    title of the debtor: update problems

    On XP, I recently uninstalled .net because it was originally a slow race. The result is a much faster computer but update Downloader insists to send me, updated net what failure then to install. How can I stop sending me these updates?

    Hi, Alan.

    You can check the box indicating do not show this message and click Ok.

    http://www.YouTube.com/watch?v=TNPNOm_4RKs

    Word of warning however.  NetFramework is an application that depend on many other applications.  You may want to rethink and reinstall NetFramework.

    How to repair an installation existing.NET Framework

    You may need to repair your installation of .NET Framework, if you upgrade your operating system or if the installation of the current framework is damaged.

    http://support.Microsoft.com/kb/306160

    How to troubleshoot installation issues of the Microsoft.NET Framework 1.1 in Windows XP or Windows 2000 (NetFramework cleaning tool includes)

    http://support.Microsoft.com/kb/824643

  • Update problem - cannot install KB982168 & KB2539631

    original title: update problem

    I keep having problems with update KB 982168 and KB2539631

    Help us help you: start by reading this post 'sticky '...

    What information to post in the Windows Update forum
        http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

    Note: KB982168 is an optional update, not security. Feel free to hide it.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  • Error Windows Update problem "don't shut down your computer updates being configured"

    OT: Windows Update problem.

    Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

    Start here (ignore the title): http://support.microsoft.com/kb/949358

  • Vista update problem, whenever I search updates, it tells me that I need those I supposedly already downloaded

    I recently had to reformat and now I try to do all my windows updates. But whenever I have to search for updates it tell me that I need those I supposedly already downloaded. I don't understand what is happening at all.

    Try: troubleshoot common installation in Windows Update problems

  • KB2676562 error 80070490 Windows update problem

    original title: Windows Update problem

    I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

    I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

    Have you tried everything in this article: http://support.microsoft.com/kb/958044

    Method 1: run (Checksur.exe) system update readiness tool

    If this method does not resolve the problem, go to method 2.

    Method 2: perform a Windows repair installation

  • Vista update problem - stop to update 3/3 0%

    original title: Vista update problem

    When my computer tries to finally start up, it comes to a screen that says Windows Update section 3 of 3, 0% complete.  He is sitting here for a minute or two, then restarts.  This loop continues indefinitely.  Will not start in safe mode.  Used a boot disk to get into the Windows repair and got the result, did not find any problem.  How to cross this attempt to update?  I have Vista.

    When you used the "Startup disk" was available as an option system restore? If so, then choose a restore point created before this issue started occurring.

    If the system restore is not available, then you have 2 options:

    (1) try a "in-place upgrade", aka, repair installation. This can be done by running the system with the "Startup disk" and choose command prompt - How to perform a repair for Vista Installation

    However, if Service Packs have been installed then you should uninstall everything first.

    You will need to know where the Service Pack .exe file is to be able to uninstall the command prompt, because the system does not start properly, or Mode without failure.

    See - method 3: uninstall Windows Vista service pack from the guest here - How do I uninstall Windows Vista service packs as a troubleshooting step

    (2) do a clean install of Vista.

  • Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

    0rignal title: Vista SP1 didn't update problem

    So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

    "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

    then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

    If you need more information please let me know and evil provides everything I can

    Hello
     
    Follow the steps and check if the problem persists.
     
    Step 1:
     
    I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
     
    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
     
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
     
    Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Step 2:
     
    As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
     
    Note: Restart your machine as usual by following step 7.
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Update problems (Windows 7 x 64)

    A few days ago I got updates not installed nearly 100, but my laptop has been stuck at 0 KB to download and made no progress.  I finally downloaded a Microsoft Tool that is supposed to fix the errors in the software update that claims to fix many things (but except 0 x 80070057).

    Later he enrolled as ever after searching updates, and when I tried to look for it would just get updates constantly without result.  Restores system attempt to before the bug was encountered failed.

    I finally gave up and returned to the factory (from partition) settings, but my new installation has the same problems, so I don't have any update that it is and can not find them with the "search for updates".

    I don't know what to do here exactly.

    Windows 7 Home x 64

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

Maybe you are looking for

  • Portege A100 - problems recognizing a new DVD burner

    Hello I'm looking to replace the Panasonic/Matsu * player UJDA750 combo with a LiteOn SOSW - 852S DVD burner. The LiteOn is CSEL and is not recognized by the Portege A100. I tried to change the master/slave/CSEL and Inverse CSEL using E2MS_WIN_SOSW -

  • I need English recovery disk for M300

    Hi allI need recovery disk for my portege m300I have just in Italian, all that we can do the disk image in the menuor tell me how to get a copy? Thank you

  • Satellite C660 supports Bluetooth 3.0?

    Hello I recently bought a Satellite C660.It says the laptop has Bluetooth 3.0. Is this true?It works very well for windows 7. However in Ubuntu 10.10 my Bluetooth doesn't seem to work. I think it's the problem of missing driver. Where can I get the l

  • Void VI does not update when printing

    I try to print a report that I have created Sub vi in my main vi.  I have several entries that are generated in the main vi I want to put in a custom report, then print.  Currently, I have the report should be generated each time that I have pres the

  • Command button to the title picture transparent

    Hi NI LabVIEW community, I try to have a 2D buttons/lights picture and superimpose a transparent image. If the image is at the front, I can't press any of the buttons. If the image is behind the buttons, I can't see the image. Has anyone tried this b