IPCC Express and card reader?

Similar Questions

• The right side and express USB card reader does not work

  Hello

  The USB 3.0 right on my rMBP does not work. I have can´t to connect any device to this side. No connection or power.

  Express card reader doesn't work or the other. Finder or disk utility will not show map of mountain.

  I can´t find the card express under system reports reader.

  I ran a test for diagnosis of Apple without any problem.

  I have reset the SMC & LANDAU.

  I reinstalled the operating system without success.

  Anyone who knows how to fix this?

  MacBook Pro with OS X El Capitan 10.11.5, Retina display

  Can someone help me here, please!

  Based on what you have tried and if can't see any device in disk utility, you are dealing with a hardware problem.  Your best option is an appointment at an Apple store for a FREE genius bar.

  Ciao.

• Satellite A300 - dvd, usb and card reader does not work

  Help needed please.

  Have a laptop Satellite A300, running vista.

  Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it. The card reader can't find anything on the card (and Yes, the card was full.)

  The usb scanner is recognized as an external memory card and the other usb port does not fuction.

  I have not installed or don't remember changing of settings or do whatever it is the habit.

  Any help or thoughts would be appreciated.

  Hello

  Your ad is very confused.
  > Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it.
  Well, there are several reasons for this; It would be possible that the inserted disc is not completely compatible. Try different drives from different manufacturers.
  It would also be possible that the STRANGE laser lens is dirty. In this case, you might clean using a cotton ball and alcohol tip. In my case it helped.

  > The card reader can't find anything on the card (and Yes, the card was full).
  Did you use a compatible card? The laptop runs these cards:
  8MB - 2 GB SD card
  SDHC - 4 GB card
  -16 MB - 2 GB xD Picture card
  Memory Stick - 8MB - 256MB
  Memory Stick Pro - 256 MB - 2 GB
  MultiMediaCard - 8 MB - 1 GB
  miniSD (with SD adapter) - 32 MB - 2 GB

  I recommend also to format the card and to copy files from computer, and then test this.
  You can also reinstall and update the driver for the card reader controller...

  > The usb scanner is recognized as an external memory card
  Can't believe that you must use a scanner software (must be provided with the scanner) and have to test this unit. By the way; for the most part a scanner driver must be installed in order to use this

• Qosmio X 300-126 - driver for FN keys and card reader

  Hi guys,.

  I have improved my Qosmio X 300-126 to win 7 and installed all the drivers (from the toshiba site) and updated my bios and the optical drive (dvd drive) and the thing is that

  Flash cards only works with the mouse and no keyboard shortcut! as the FN key is dead but worked fine in vista.
  And the other problem is that the reader of card don t work, which I think is the "unknown device" that I have in the Panel and devices don't know how to fix this problem.

  Help, please.

  Hello

  > Flash cards only works with the mouse and no keyboard shortcut! as the FN key is dead but worked fine in vista.
  I had the same problem after upgrade to windows 7, but the solution is pretty easy: just install the latest Toshiba Value added Package and Support Utility for Windows 7 Flash cards. If it s is not no for Windows 7 on X 300, just search by Satellite L500 and download them it worked for me! :)

  > And the other problem is that the reader of card don t work, which I think is the "unknown device" that I have in the Panel and devices don't know how to fix this problem.
  You need to download card reader driver. You can find it on the Toshiba site too. :)

• Tecra S1 - USB ports (all) and card reader does not

  Hello

  Just got a 2nd user Tecra S1. I was told that the drive SD card and USB ports do not work. Card reader (and card PCMCIA USB ports) works as well as the ps/2 port.

  Any ideas anyone? USB ports turn on power on indicators key USB etc but nothing is recognized under XP.

  See you soon

  Hello

  Maybe the USB ports listed in the devices with exclamation points Manager yellow. Did you check that?
  In addition, I would recommend updating the chipset driver. Visit the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you also received a Toshiba Recovery disk you may have to use it. The HARD disk will be wiped and XP will be installed all the drivers and tools.

  Good bye

• Y50-70 - USB Reader and card reader no longer recognized

  I have Lenovo Y50-70 (running Windows 10) and my WD My Passport Ultra external drives are more recognized (they worked fine until 3 days ago). My card reader CF is no longer recognized either. My Samsung Galaxy S5 works well.

  The WD My Passport drives Ultra both my card reader still work with my older ThinkPad, which works in Windows 7. This isn't a disc problem, or a cable problem.

  When I look in devices and printers, the WD My Passport Ultra appears. It has the following warning sign for troubleshooting option. When I troubleshoot it comes back telling me that the driver is not installed. Continuing, he finds the driver, install it and asks to restart the computer. After the computer restarts, the drive still does not appear.

  When you look at the properties of the drive, it says that the driver is not installed and an error code 28 the list.

  Comment to Moderator: The model is added to the object for clarity.

  fgossieaux wrote:

  Thanks Bill - Sorry for not being specific. Both my WD drives (which have no external power sources) that my card reader does not work. I tried to remove the drivers and rebooted the computer, but none of it works.

  You can try to restore to a date (three or four days before the problem) and see if you have the problem solved.

• Aspire 5562 camera, touch pad and card reader does not

  Hello world!

  I had an upgrade recently with my Aspire 5562 to Windows 7 and everything seems to work fine except the webcam, card reader and touchpad doesn't have function of scrolling even if I can use it partially. Anyone know where I can download the drivers? I don't see no 5562 support here in the drivers download page.

  Thank you very much!

  Unfortunately, this seems to be an older unit that is no longer supported by the system of drivers.

  Online search for chipsets/hardware drivers with that you are having a problem probably will produce results.

• USB not port not working and card reader doesn't work is not on my desk.

  My usb port and built-in card reader does not work on my desk, also my external speakers do not work. stakeholders work with my laptop, it is not connected via USB.

  Hi yankee7,

  · You receive an error code or error message when you connect a USB device?

  · Do you remember recent changes made to your computer before the show?

  · What is the number and the model of the computer?

  · What is the service pack installed on the computer?

  Check the status of the device in Device Manager. Follow the steps below:

  a. click on start

  b. in the run box, type in devmgmt.msc

  c. expand USB bus controllers

  d. check if no yellow bang is listed (double-click on the device with a yellow bang for the error code)

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IPCC Express - step of reading DB with variables

  Hello

  With the help of the IPCC Express 4.0.5. I have a DB reading step that takes call coverage of CallManager information on specific extensions. "Selection field" tab I have:

  In this case, he pulls the info for extension 66960 successfully. What I really want, is to replace '66960' with a variable that gets defined earlier in the script.

  Does anyone have experience with this? I can create a variable of string called 'test '. However, if I can replace "66960" $test I get an "undefined SQL statement variable: test" error message.

  Any help appreciated.

  Thanks - Rob.

  You can control if you have a return transport after that the variable 'test' in the db read step. If so, removing the same will save the step with the variable in the query without any error message.

• Experiences of T500 and card reader

  Hello

  I think around to replace my HDD with a SSD Intel so I also read a lot about this different storage technology. Later, I came to the result of attempting moving $TEMP, $BROWSERCACHE and $PAGEFILE for a cheaper Flash. Why not use the card reader integrated?

  Someone with experience in the execution of the build in the card reader (RICOH)? I can't find any Tech specs for this device and so I have no by an expensive sandisk sdhc extreme iii 30 MB/s or anything else where there is a slower card reader built in.

  I woulb gladly about some results "benchmark" of your sd, sdhc, mmc cards in the reader build-in.

  Thanks, Ronny

  I tried a SATA CF adapter in the UltraBay slot. My Lenovo is not recognized-, but it works with a USB adapter to SATA (at low speed).

  In my view, card reader is not a solution for my task. It is very possible to be too slow for the paging - now I'm going to see how long lives the SSD.

• satellite a200 - 14 d and card reader drivers for windows 7

  Hello
  I recently installed windows 7 on my toshiba a200 - 14 d I have problem with card reader. It doesn't work because I do not have drivers. Pls help!

  Hello
  Try it with the flash media driver for win XP for your model.

  Works fine on my satellite a100.

  But the FN keys still don't work :-(

• IPCC Express and holiday cheque

  Hello

  Someone knows a way to manage simple time, dates and holidays with IPCCX?

  As an example using external ASP pages?

  Tanks,

  Alessandro

  Alessandro,

  It can be done in several ways. If you don't have that app just hard code dates is so fast and the most risky.

  other options are call a vacation check file and have this point to a html file which has all the dates of the holidays.

  Attached are my two scripts that should give you a good idea.

  If it helps please rate.

  Thank you

  Barnes.

• Support for XP Driver for Modem and on Satellite U300 card reader

  Hello

  I got my laptop Satellite U300 of ot Vista XP. Now I am facing some problems.
  I could not find any compatible driver XP from Toshiba on Modem support and card reader. Is it available? If Yes please let me know the link for the same thing. Thank you.
  Rajeev

  I Don t know where your problem... I checked out the Toshiba drivers & download site and found all THE drivers, including your (modem and card reader).

  So, please, go [HERE | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] and download the driver of modem/card reader.

  She's.

  Greetings

• HP Pavilion G6-2260sh card reader and video driver for win7 64 bit

  Hi people!

  I need drivers for HP Pavilion G6-2260sh video and card reader driver for win7 64 bit

  Can someone help me?

  An error message appeared so I tried the above utility to describe what driver I need.

  Semms that it's the final solution: 13-4_mobility_vista_win7_win8_64_dd_ccc_whql

  Now really perfect thanks!

• IPCC Express estimated the waiting time in the queue

  I have an ipcc express 4.0 and my client wants the number of callers to hear a prompt indicating the estimated waiting time in the queue.

  Is this possible with this solution? Maybe to deal with scripts.

  Any idea?

  Jose

  Jose,

  You can do the process you like through the IPCC Express Scripts.

  You must use the "Get Reporting" statistical step under 'IPCC Express' in the script editor and choose the statistics that you want, in your case, you have to select 'Report object'-> 'CSQ IPCC Express' and afte, select 'Area'-> "Expected wait time", store that value in a variable to create as a guest to read the value.

  Hope this helps,

  Juan Luis