IPF in nonpaged area

I installed the windows updates on my computer hp laptop a few days ago and after reboot I got a BSOD indicating there is an IPF in a non paged area. I can't start in safe mode, USB drive, CD/DVD drive without this screen limiting access to my hard drive. I even tried to access the drive by installing on another laptop, but not luck. I start to hirens boot cd on another unit and consultation: display disk files, but they were preceded by a symbol $ and read-only. I had no problem with my HP til updates. I cling responsible for Microsoft, as I read other people are having the same problem. I contacted Microsoft and they sent me to restore disks for Vista, but still, I can't boot from the optical drive. It becomes a nightmare and I will not regret losing my data in case it becomes necessary to re - partition and format the drive. If anyone has a suggestion... just below to set the income of Bill Gates... lol, I would be grateful. I have several years of experience in repairs and installation of software and hardware, but it is difficult for me. Thanks again to all who can bring the light of life to my HARD drive.

Christopher

Same computer as in this thread (Oct 09) earlier of yours? -Online http://answers.microsoft.com/thread/34739a6a-089c-4c5b-a3b8-5bbae86999a8

Tags: Windows

Similar Questions

  • IPF in nonpaged area blue screen Win 7 64

    To run Win 7 64 BSOD delivery bit and got with error message Page Fault in non paged area. Recommended that I try Safe Mode. Then turned PC on again, came back to a screen which recommended repair or Normal startup. I have authorized the default setting - repair. Win 7 attempted to restart, then BSOD again with the same message. Turned PC off again and this time chosed F8 during startup to access Safe Mode options. Has been presented on the screen to choose and I chose Safe Mode. Minimum drivers scroll towards the bottom of the screen and the PC begins to start, never to switch Mode without failure. New BSDO is displayed. I unplugged all the USB devices, Zune HD, external hard drive, etc leaving only mouse and keyboard.

    Tried again to go to Safe Mode and it comes back to the BSOD.

    If I choose to start Win7 normally, I see the Win7 splash screen as it will start upwards, then returns to the screen recommending to select repair or start normally. If I chose the repair, it goes back to the BSOD. If I chose Normal startup, it will come back to this screen. So it seems to be an endless loop and no way to get into Safe Mode.

    I have not tried a repair of the Win7 disk yet, because I don't know if there is something I should do first, like entering the CMD Mode if it will let me, etc and try different commands.

    I feel it's related material based on what I've read online from my work PC, but I need to raise Win7 so I can dig & run diagnostic tests. Last thing I did on Sunday has been add my new Zune HD in the Zune software client and that I could see, all updated very well. I used the Zune PC client software for my Zune 120 previously without problems.

    Any help would be appreciated so I can check 'how to' on work on the home PC.

    Thank you!

    Hi Wasipeer,

    Welcome to the Microsoft community.

    For better assistance, answer the following questions.

    1. What is the brand and model of your computer?

    2. do you get any error code or message?

    3 did you do any change in the computer?

    See the following Microsoft Help article and check if that helps.

    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

    Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Reference:

    Follow the link.

    https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff559023 (v = vs. 85) .aspx

    I hope that this information will help you.

    Please reply with the status of the issue so that we can better help you.

    Thank you.

  • Wdf01000.sys IPF in nonpaged area

    Hello!

    So I have developed a recent kernel mode driver to read the memory for me and pass a usermode program. Everything works perfectly until I close my handle to DeviceIoControl.

    I can't find anything definitive myself, as the reading of my MEMORY. DUMP only really tells me the error that is in the title now.

    Here are the relevant parts (my! analyze - v)

    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced.  This cannot be protected by try-except,
    It must be protected by a probe.  In general, the address is simple bad or it
    pointing to freed memory.
    Arguments:
    Arg1: ffffffffffffffd0, memory referenced.
    Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
    Arg3: fffff880010f5622, if not zero, the address of the instruction that refers to bad memory
    address.
    Arg4: 0000000000000000, (reserved)

    Debugging information:
    ------------------
    ADDITIONAL_DEBUG_TEXT:
    You can run '.symfix; .reload' to try to fix the symbols path and of loading symbol.

    FAULTING_MODULE: fffff80251c03000 nt

    DEBUG_FLR_IMAGE_TIMESTAMP: 51 51641

    READ_ADDRESS: could not get nt! MmSpecialPoolStart
    Unable to get nt! MmSpecialPoolEnd
    Unable to get nt! MmPagedPoolEnd
    Unable to get nt! MmNonPagedPoolStart
    Unable to get nt! MmSizeOfNonPagedPoolInBytes
    ffffffffffffffd0

    FAULTING_IP:
    Wdf01000 + 4622
    fffff880'010f5622 4c8b50d0 mov r10, qword ptr rax [30 h]

    MM_INTERNAL_CODE: 0

    DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

    BUGCHECK_STR: AV

    CURRENT_IRQL: 0

    LAST_CONTROL_TRANSFER: from fffff80251d1dc31 to fffff80251c5d440

    STACK_TEXT:
    fffff880 '0aed14d8 fffff802' 51d1dc31: 00000000'00000050 ffffffff 'ffffffd0 00000000 00000000' fffff880' 0aed16c0: nt! KeBugCheckEx
    fffff880 '0aed14e0 fffff802' 51c97adb: 00000000 00000000' ffffffff 'ffffffd0 fffffa80' 0b 674080 00000000 00000000': nt! FsRtlAreThereWaitingFileLocks + 0x174d
    "fffff880 '0aed1580 fffff802' 51c5aeee: 00000000 ' fffff980 00000000 '1d7b6ee0 fffffa80' 0b6d9800 fffff880 ' 0aed16c0: nt! ExQueueWorkItem + 0x145b
    "fffff880 '0aed16c0 fffff880' 010f5622: fffff802 ' 52043132 00000000 00000001' ffffa9e0 ' has ce50289c fffff802'5224968: nt! KeSaveStateForHibernate + 0x14ce
    fffff880 '0aed1850 fffff880' 010f5866: fffff980 ' 1d7b6ee0 fffffa80 '0b6d98e0 fffffa80' 0b6d98e0 fffffa80 ' 0aa08a10: Wdf01000 + 0 x 4622
    fffff880'0aed1890 fffff802 52240 d 86: fffff980'1d7b6ee0 fffffa80 '0b6d98e0 00000000'00000002 fffff802' 51cbe816: Wdf01000 + 0 x 4866
    fffff880 '0aed18d0 fffff802' a 520431, 6: fffffa80 '0b76fd00 00000000'00000000 00000000'00000000 fffffa80' 0aa08a10: nt! MmIsVerifierEnabled + 0x3eb6
    fffff880 '0aed1920 fffff802' 5203aa80: 00008000'003 c 0014 00000000'00000000 00000000'00000000 00000000'00000000: nt! PsReferencePrimaryToken + 0xbd6
    fffff880 '0aed19b0 fffff802' 5203aca2: fffff8a0 '0877b 540 fffff960' 000c7c9f 00000000'00000054 00000000'0000004 d: nt! ObReferenceObjectByHandle + 0 x 480
    fffff880 '0aed1a50 fffff802' 51c5c453: fffffa80'0 b 674080 fffffa80 '0b 674080 fffff880' 0aed1b80 00000000' 00000000: nt! NtClose + 0 x 212
    fffff880 '0aed1b00 000007fb' 64bc2c9a: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KeSaveStateForHibernate + 0x2a33
    00000034' c99cfa78 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x000007fb'64bc2c9a

    STACK_COMMAND: kb

    FOLLOWUP_IP:
    Wdf01000 + 4622
    fffff880'010f5622 4c8b50d0 mov r10, qword ptr rax [30 h]

    SYMBOL_STACK_INDEX: 4

    SYMBOL_NAME: Wdf01000 + 4622

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: Wdf01000

    Nom_image: Wdf01000.sys

    BUCKET_ID: WRONG_SYMBOLS

    Follow-up: MachineOwner

    Hello

    The question you posted would be better suited on MSDN Forum. I suggest you post your question on the MSDN forums:

    Check out the link:

    https://social.msdn.Microsoft.com/forums/en-us/home

    Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  • U310 - "failure page in the nonpaged area."

    Hello

    I have Lenovo IdeaPAd U310. Since a few days, I have problem with booting the operating system. When I turn on, after that a few seconds system displays a BSOD with an error "page in the nonpaged area failure." After that computer try to fix yourself, then restart and... system displays a BSOD with error 'page in the nonpaged area failure' it is the same in safe mode. So I can't back up my data from the HARD drive or check system settings or drivers. I can run BIOS and boot menu, I changed the boot sequence, but the computer boot form USB CD or USB key.
    What I would do. How private backup files form HARD drive?

    My job U310 now I used onekey recovery and now have windows 8. My problem has been resolved.

  • Color Laserjet M476dw MFP: page in the nonpaged area 'failure' BSOD when you install the latest driver for M476dw

    I just bought a Color Laserjet MFP M476dw for use on my wireless network.

    I downloaded the latest version of the suite of the HP driver: LJPro-MFP-M476-Full-Solution-13302

    for my Windows 8.1 operating system / 64 - bit and listed as version: 10.0.13302.320 - September 25, 2014

    I was connected with a local administrator for the installation level account

    I started installation, the printer was discovered and s/w install went fine until she gets to the point of print test page test page printed but that page was printing the computer locked with his (first) Disconnections:

    "failure of page in the nonpaged area".

    I turned off, restarted and after the connection got an error message that says:

    «The HP printer and Alerts State met and error and can not recover... Please restart...»

    Windows version: Win32NT 6.2.9200.0

    HP printer status and alerts version: 070.040.00169

    I rebooted again and got the same error...

    I started the uninstall program with the hope of just uninstall the printer status s/w and then put it back.

    but the uninstall program seems to have uninstalled the entire suite of s/w...

    Before going to this one more time, I thought that I would like to ask for suggestions...

    I've owned this phone for 6 months, and it was Cap... it's the first BSOD I did...

    Thanks for any help!

    I wanted to just close this thread:

    I was out of town for a week, but just returned and recalled to HP support.

    The technician did a large manual cleaning of the pilot has failed on my machine.

    and ran two different installers cleaning MSI Windows then with temporarily disabled antivirus s/w

    (which I had also done during initial Setup) we re-installed and everything seems to work.

  • Cannot start after the blue screen "page in the nonpaged area failure."

    My sons laptop has got to me.  There the error page blue to come with "failure page in the nonpaged area." There is a chain of technical info of numbers, but this changes a little at each attempt.

    I tried all F8 options, without success.  I did a restore disk from the laptop of my other son (which is the same) and that has not worked and I also downloaded a file of system restore on the internet who do not.  I ran diagnostics memory on the scope option and who found nothing.

    No matter what I try, always the fails to start after the first screen with Microsoft Corporation at the bottom and the small lights of scrolling!

    I would be grateful for any suggestions that anyone can have.  I wondered if I should try to borrow a disc of Windows Vista from someone and try from there?

    Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

    I hope this helps.

    Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Satellite C70D PAGE FAULT IN NONPAGED AREA - frequent BSOD

    Hello

    for awhile, my laptop is a blue screen several times a week, e-mail: PAGE_FAULT_IN_NONPAGED_AREA.

    Past discharges according to the attachment.

    How to recover from this?

    Help, please.

    Thank you
    Alex

    I also have this error sometimes, all my BSOD can be found here - http://answers.microsoft.com/en-us/w...7866#LastReply

    Most of the drivers are probably obsolete and not for Windows 10... For example my BSOD is caused by AR8171 of Qualcomm Atheros driver...

    BUMP...

  • Get the Blue error screen: "error of Page in the nonpaged area".

    Original title: Page fault

    I get a blue screen Page fault in non paged area... just above what it lists win32k.

    I get this error when you create a new contact in Outlook or by using Firefox.  I can use IE 8 without any problem.  Do not know what is causing this problem.

    LJ

    Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

    PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

    http://msdn.Microsoft.com/en-us/library/ff559023%28VS.85%29.aspx

    Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can watch the discharges with the debugger and to see the cause of the accident.

    André

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • BSOD after fresh installation of Win 7, failure of page in the nonpaged area. Win 7 will not install

    A day at the start of a program on my computer that I used for years without incident, the computer suddenly fell down, restarted, and I got the infinite loop of system repair. No change in hardware/software, don't know if a recent Windows Update has been installed. Once again, CPU, mobo, Vid, RAM are the same for the past 4 years.

    After much frustration, I decided to just reinstall Win 7. So I deleted my partition, re-created a new partition and installed Win 7

    In the last step of the process of installing Win 7, it says Setup cannot complete. It is then stuck in a loop of reboot with a BSOD page fault in non paged area.

    I tried F8 on startup and choose Safe mode, but then he says that the installer cannot boot mode safe because the installation of Win 7 did not finish.

    I tried to reinstall Win7 by removing the disc again, but I get the same results.

    What can I do?

    HI - finally got the job. I had the computer to use only the GPU on board BIOS and was able to install. Somehow the graphics driver conflict when Windows is first installed and it kept crashing.

    Thanks for your help.

  • Portege M400: update XP to Vista causes the page fault in nonpaged area

    I spent several hours working through the Vista upgrade only. After a restart the process, I get a BSOD now reporting a page fault. Microsofts advice was to regularize the upgrade and then try again. Useful (or not) This resulted in the same second time around. The office is now closed for the weekend, probably because no one gets questions Friday night / on weekends?

    There is a KB on support.microsoft.com (kb 939720) which refers to a similar problem and a fix, but you can not download it - you must call. All other users Portege had the same problem and how they have solved their?

    Concerning

    Chris

    Hello

    just a quick question: have you already installed the BIOS compatible Vista on your computer? It s one of the most important steps before installing the 'wonderful' on your drive Vista hard (I don't understand why you need but it s OK your machine... ;))

    If it isn't already, go to the website of Toshiba Driver download and download the latest BIOS for machine (Vista compatible) which is absolutely essential if you decided to put Windows Vista on your computer.

    Here´s the link:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    Would appreciate any comments about your situation.

    Greetings

  • IPF in the non paged area error (applecharger.sys)

    Hello. After the upgrade to win7 for win8 pro, I get this error/bsod every time I shut down the pc: "IPF in nonpaged area (applecharger.sys).

    I don't think it's a hardware thing, that I had no problem whatsoever with win7 and after upgrading win8 I run a checkdisk on all readers. My main hard drive is an ocz ssd and I have a hard drive for backups! Also, I've updated all drivers/bios for win8 to my mobo gigabyte (model Z68A-D3H-B3). I saw on google there are a lot of this problem is going on, but no solutions yet.

    Any help is appreciated!

    I fixed it on my computer. I uninstalled a program called ON / OFF and fixed it.

    ON / OFF is a Gigabyte program that uses applecharger.sys for connections to Apple.
    I hope this helps.
  • Satellite M30X partition drive to install Win 2000 and XP

    I have partitioned my disk with Partition magic, and when I try and install Windows 2000 as a new OS I get an error message during the installation:

    SETUP: 0 X 00000050 (0XF265C, 0X00000000, 0XBFF97874, 0X0)
    IPF in nonpaged area

    I installed the new bios on the Toshiba site, but nothing helped. Any ideas?

    Thank you

    Hello

    changed your hardware components like RAM or HARD drive? Before installing a new system they must be removed!

    If this does not work, you can try to partition your HARD drive with fdisk to W2k installation configuration!

    Maybe this will solve the problem of th!

    Bye Bob

  • Tecra 8100 W2K: Fn + F5 produces Blue Screen of Death (BSOD)

    My faithful 8100 (W2K sp4) has developed an irritating fault. If you press Fn + F5 (display control), the system crashes quickly.

    It is quite difficult to see what is being said ' cos the BSOD message flashes very quickly and by.
    However, it seems that Stop 0 x 00000050 (0xF000FF54) IPF in nonpaged area.
    Address 0045AB9F base at 20400000 DateStamp 45069e6e ntoskrnl.exe
    Early physical blah blah memory dump

    Now, I have no idea whay it started. In case it was a software I provided an image the boot partition to a stable image of 12 months ago, but it makes no difference.

    Its something to do with windows for sure. If I press Fn + F5 until Windows has loaded there is no problem.

    I'll try it in SafeMode tomorrow to see if that helps, but if anyone has any experience of something similar I'd love to hear it.

    Thanks for any info

    Hello

    It is not easy to say what the problem is here, but you can try to remove the Toshiba from your system utilities. Restart your Tecra and check if the function FN went. If so, this tool is responsible for this.

    Download and install again. Perhaps this will help you solve this unusual problem.
    To be honest I never, but never really heard of something similar.

  • Bluscreen question on Satellite A100

    Hello
    I just both a Satellite A100 - 788, 8 of 10 times when I'm playing something in media player, I get a blue screen with a message about a problem with a file called aativvaxx.dll... IPF in nonpage area... I tried to find a newer driver for the 1400 X ATI card but I have found none.
    Help, please!
    Thanks in advance,
    Eugen

    Hello

    Did you mean the ativvaxx.dll?

    I found a useful page that provides unique .dll files:
    http://www.afreedll.com/dll/info/ativvaxx_dll.html

    You can try to download this file and could replace the old version with the version you downloaded.
    But you should first check if the downloaded file is a newer version and a backup of the file before you replace it with a new copy.

    But in general, you should always use the graphics driver from the Toshiba page.
    If you want to use a different drivers, you can do so at you own risk.

  • Updates in circulation must not set up

    I run Windows 7 SP1 x 86 on my desktop pc and I tried to update after the February 2016 patchday. I had to download and install updates from 20.

    After you have installed the 20 updates Windows 7 was stop and perform the configuration of the first phase up to 30%.

    At that time came a BSOD 0 x 50 IPF in nonpaged area. WinDebug said: "Probably caused by ntkrpamp.exe."

    In the history of Windows Update I have seen: 12 upgrades were in circulation, 7 updates were ok, 1 update has failed.

    My problem: the modus in circulation does not change. When I install the new updates, the phase of configuration doesn't exist anymore.

    When I see in the Windows Update/installe updates, 12 stocks appear to be "installed".

    In a new search on Windows Update 12 stocks are not available.

    This is not normal, what can I do to clear the situation?

    Please download copies of your files to dump in the form of files shared your onedrive with a link here. Please include only the less than 14 days old and limiting the number of no more than five.

    The dump file will be created in c:\windows\minidump. You may need to change your settings in Windows to be able to view the file. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

    What is your computer brand and model? If not a branded computer, what is your motherboard brand and model?

    Please download and run the display driver and download a copy of the report he produced on your OneDrive. To obtain a report all drivers Select Edition, select all followed by file, save selected items.
    http://www.NirSoft.NET/utils/DriverView.html

    Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. The request for a copy of this file is additional to answer the question about the brand and the model. If the report is in one language other than English, please indicate the language.

    For assistance OneDrive see paragraph 9.3

    http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

Maybe you are looking for

  • keyboard interference

    I'm a character (]), which continues to repeat when I do type everything, made my computer unusable for research or word processing.  I called the Apple Support.  They had me move from my wireless keyboard that came with my iMac to a plug in keyboard

  • How to remove "Latest Items" in the Windows Vista notification area?

    When you right-click on the 'Orb' in Windows Vista and select 'Properties' on this subject, on the 'Area of Notification' tab, you can customize icons by hide/show it. The problem is that in my "recent Items" here, it gets accumulated it down until t

  • How to restore windows genuine?

    I need to format my laptop to create the disk partition. but I don't have the Windows Recovery CD... How to restore the original windows genuine in such a condition

  • Sybaptics Touchpad gestures don't work

    Computer laptop HP Pavilion 17-e037cl brand new. Failed to get the gesutres work (two fingers to scroll, etc.). Reinstalled the drivers, made sure that all boxes have been checked in the menu setup. Don't know what else to try. Thanks in advance for

  • I would like to resize the windows of fixed size...

    I feel almost ridiculous to have to ask this question, but after many (MANY) searches on the internet, I simply could not find a single effective fix.  Basically I want to somehow resize a window of fixed size (even through a registry hack).  More di