iPhone 4 strange issue please help

Similar Questions

• I want my iPhone lost or stolen please help

  I want my iPhone lost or stolen please help

  < re-titled by host >

  Deneen8500,

  When you say that you have "written to you people ', I have to imagine say you you wrote to Apple.   Here, we have no way to help you find a lost phone.   It is a technical body of the user for the user.

  And of course, Apple cannot find lost phones.   They provide facilities for you to implement "Find my phone", but if you haven't taken advantage of this I'm afraid can't do anything.   I hope that you have reported to the police, especially if you have coverage with private insurance.

• Need to get off at iOS 9.3 beta 2 really scared on my main camera iPhone 5s really scared please help

  really scared please help I already deleted the profile beta and dread version beta site Web of apples please help I use my iPhone 5s per day as my only phone

  If you have already removed the beta profile, you should update (downgrade) to iOS 9.2.1 threw iTunes, back up first.

• Small blue screen issue Please Help

  Hello

  I turned on my pc this morning an appeard blue screen with something like the following below.

  I've never seen before read something like - if seen first computer reboot /hardware - then went to connect (before I pressed F9 - diagnostic tool

  to see if something was wrong--all passed) then watch Windows error recovery screen I pressed "Start windows normally" because I don't know what the other 3 meant that I'm not this technique.

  Logged in - Message appeared "Windows has recorved against an unexpected closed, a windows problem caused to stop working correctly". I looked at the event log, but I have no idea what I want to really, I vacuum the back on pc - the dust ect... Please help because I do not want to see it again / please if anyone is nice enough help me please that they have no basis.

  I'm running Windows Vista Home premium service pack 2

  I look forward to your reply.

  BS

  I understand.  The files are newspapers of accidents and have nothing to do with your operation systems.  You can do what suggests the wiki for when access is denied without too much worry about a problem

  Try this

  If you get "access denied" try this method

  First, create a folder on the desktop and call Minidump

  Open the C:\Windows\Minidump folder and do the following:

  Home > select all > Home > copy to > choose location > Minidumps > copy

  Then right click on the Minidump file > Send to > compressed (zipped) folder.

  Then download the compressed (zipped) folder newly created on Onedrive and provide a link here.

• VIP - ANALYZE Configuration Issues - Please help!

  Hello world
  
  First of all I ask you guys to Please HELP SOLVE ME THIS PROBLEM – thank you!
  
  I am installing grid Infrastructure Oracle 11 g 2 11.0.2.0.3 on Oracle Solaris 11.11 x 86 64 bit installed using Live Media on Oracle VirtualBox 4.2.6.
  
  After you have configured the nodes in the cluster, I ran the cluster verification utility that came out with 100% success.
  
  However, during root.sh run, I get the following error:
  
  /U01/app/11.2.0/grid/root.sh
  --------------------------------------------------
  CRS-4266: Vote or managed to replace the files
  # File group universal name Id disk STATE file
  -- ----- ----------------- --------- ---------
  1. online 4a3543261bc34fc9bf6e41b5d7fa04c8 (/ dev/rdsk/c8t2d0s1) [OCR]
  Located at 1 vote (s) disk.
  CRS-2672: attempt to start 'ora.asm' on 'sol1.
  CRS-2676: beginning of "ora.asm", the successful "sol1"
  CRS-2672: attempt to start ' ora. OCR.dg' on 'sol1.
  CRS-2676: beginning with ' ora. OCR.dg' on 'sol1' successful
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n... failed
  FirstNode configuration failed on line /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm 9196.
  /U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  I have re-run this command to see the real errors
  
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n
  ------------------------------------------------------------------------------------
  RPRC-1013: failed to start of ora.net1.network resources
  RPRC-1064: failed to start of ora.net1.network on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  RPRC-1079: failed to start of ora.sol1.vip resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to place the "ora.sol1.vip" resource on which will achieve its investment policy
  RPRC-1013: failed to start of ora.ons resources
  RPRC-1064: failed to start of ora.ons on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  
  
  I ran the following commands to know the State of SAN and SCAN-headphones
  
  srvctl status scan
  --------------------------------
  VIP scan1 SCAN is enabled
  Scan1 VIP SCAN does not work
  VIP SCAN scan2 is enabled
  Scan2 VIP SCAN does not work
  SCAN VIP Scan3 is enabled
  Scan3 VIP SCAN does not work
  
  srvctl status scan_listener
  --------------------------------------------
  LISTENER_SCAN1 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan1 is not running
  LISTENER_SCAN2 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan2 is not running
  LISTENER_SCAN3 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan3 is not running
  
  srvctl config scan_listener
  ---------------------------------------------
  LISTENER_SCAN1 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN2 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN3 listener SCAN exists. Port: TCP:1521
  
  
  Here is the content of my/etc/hosts and /etc/resolv.conf files
  
  cat/etc/hosts
  -----------------------------
  # Public
  192.168.56.101 sol1.localdomain loghost sol1
  192.168.56.102 sol2.localdomain sol2
  192.168.56.160 solfiler solfiler.localdomain
  
  # VIP
  192.168.56.111 sol1-vip sol1 - vip.localdomain
  192.168.56.112 sol2-vip sol2 - vip.localdomain
  
  # Private interconnection
  192.168.0.101 sol1-priv sol1 - priv.localdomain
  192.168.0.102 sol2-priv sol2 - priv.localdomain
  
  # Scan
  #192.168.56.201 ground-sweeping ground - scan.localdomain
  #192.168.56.202 ground-sweeping ground - scan.localdomain
  #192.168.56.203 ground-sweeping ground - scan.localdomain
  
  
  cat /etc/resolv.conf
  ------------------------------------
  #
  # AUTOMATICALLY generatedFROM_SMF_V1_
  #
  # ATTENTION: THIS FILE GENERATED FROM SMF DATA.
  # DO NOT EDIT THIS FILE. CHANGES WILL BE LOST.
  # See /etc/resolv.conf (4) for more details.
  
  Search localdomain
  nameserver 192.168.56.101
  nameserver 192.168.56.102
  nameserver 192.168.1.1
  
  
  Here are the details of the network
  
  dladm show-phys
  ----------------------------------
  MEDIA SPEED DUPLEX LINK
  Net1 Ethernet up to 1000 complete e1000g1
  NET2 Ethernet up to 1000 full e1000g2
  Net0 Ethernet up to 1000 complete e1000g0
  
  ipadm show-addr
  ---------------------------------
  ADDROBJ TYPE STATE ADDR
  127.0.0.1/8 ok static lo0/v4
  Net0/v4 dhcp ok 10.0.2.15/24
  Net1/addr static 192.168.56.101/24 ok
  NET2/addr static 192.168.0.101/24 ok
  OK static lo0/v6: 1/128
  Net0/v6 addrconf ok fe80::a00:27ff:fe5f:f484 / 10
  
  
  I did the nslookup on my name SCAN
  
  Nslookup ground-scan
  ----------------------------------
  Name: sol - scan.localdomain
  Address: 192.168.56.202
  Name: sol - scan.localdomain
  Address: 192.168.56.203
  Name: sol - scan.localdomain
  Address: 192.168.56.201
  
  I ran the following commands to see if the installation process correctly reads my SCANNING configuration
  
  srvctl stop scan_listener
  srvctl stop scan
  
  srvctl config scan
  -----------------------------
  SCAN name: ground-scan, network: 1/192.168.56.0/255.255.255.0/net1
  SCAN VIP name: scan1, IP: /sol-scan/192.168.56.203
  SCAN VIP name: scan2, IP: /sol-scan/192.168.56.201
  SCAN VIP name: scan3, IP: /sol-scan/192.168.56.202
  
  So it's good reading ANALYSIS information there is so no problem
  
  I tried to start listeners to SWEEP and ended up with the same mistakes
  
  srvctl start scan_listener
  ------------------------------------------
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN1. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN1. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN2. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN2. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN3. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN3. LSNR' on which would meet its investment policy
  
  If it helps, I use automatic network default Solaris 11.11 management but I changed IP addresses of net1 and net2 manually to meet my network
  Requirements for the clusterware.
  
  I followed all the steps of the system requirements for installing under solaris 11.
  
  After checking everything I could have as detailed above, I'm now helpless as to where things go wrong
  
  What is automatic 11.11 Solaris network management that does not allow the creation of addresses IP SCAN VIP?
  
  Once again I ASK YOU GUYS to Please HELP me THIS PROBLEM FIX.
  
  Concerning
  Terry.

  Hello

  the problem is the host name of the server is resolved is on the 10.X.X.X network.
  For example, the cluster requires the public network to be on this network. And the error you get, because this network is on DHCP.

  If you have the following options that you can try:
  a.) change the server to have the host name to resolve to the 192.X network
  (b) change the order of the network adapters
  (c.) remove the network 10.X.X.X at the moment of installation

  Concerning
  Sebastian

• !!! Very Urgent - Production Issue - please help

  Hello IDMers,
  
  We are facing a problem in production, we have updated the AD process form yesterday. Two fields Type Employee and Employee ID field as a process user AD had up-to-date for all existing users. These two fields are now empty for all users.
  
  But these fields have the appropriate value in the User Table of Xellerate for all users. Now I need to some how fill in the Type of employee and employee ID for all employees of the User Table to your AD process.
  for example: consider an employee called Pierre - type emp is full-time and Emp ID is 100; i'm in the IOM user Table, but this user is configured with AD and now I have to update his AD process form so that these two fields are filled. I need to do it for all users of the IOM. I suppose pre-population adapter triggers only when the form is created for the first time. Please suggest me some ideas.
  Is there an easy way to do this task?
  What is my way of thinking, I need to have a scheduled task that basically loop through all users and updates of their field and the employee id as the user Xellerate Table AD user.
  
  Please help me with this because it is very important.
  Thanks once again everyone else for your support all this while.
  
  Kind regards
  ~ THE VSN

  You want to send this info to AD?

  If Yes

  CHS task to create and update the form of process by using APIs.

  If not

  Solution 1:

  Use DB query to be updated directly as a database if you have access (never Recommneded) but the task of 1 minute to do this.

  Solution 2:

  Create CHS task to run the DB query.

  Solution 3:

  Check the VSH utility that comes with IOM.

• Small desktop Inspiron computer (3647) Driver Issues Please Help

  I am new to this forum n im really have a problem, I downloaded the drivers directly from the dell Web site... but there are some drivers that do not install, I looked in my device manager, it is highlighted yellow triangle three...    1 generic bluetooth adapter...  2. network controller. 3 pci simple communication controller but I can not even free wifi... could someone please help solve this problem?     Thank you

  Hi jasonm6565,

  I suggest you try to download the driver for the card wireless to another browser.

  Also, answer us with the snapshot of the Device Manager with the WAN adapter.

• Problem strange system, Please HELP!

  Hello

  I downloaded a nice big game and installed. Since I don't have that system started acting really strangely. The screen go black and everything seems to disappear. All the files, all the files, all programs, disappeared and every time I try to open programs or files, it is said that is unable to read the file in the source. I can't even turn off the system. The strange thing is that to happen just with my account, which is the admin, and not with the other account. Now, I tried to uninstall the game, but unfortunately I do not have the power to do it with the other account. II have Norton Internet Security and I did a full system scan and the results where no virus detected.
  Now, I do not understand if a system problem or my antivirus is not good enough.
  I would like to know is there is the possibility of having the power to admin in the other account, I mean the ability to remove the system and personal files like this.
  If anyone can help please please I need your help.
  And I'm sorry if my English is a confusing bi :)
  Thank you

  Hello

  1 do you have. what game installed?

  2. What is the brand and model of the computer?

  3. your admin account is a Local account or a Microsoft account?

  As the other user account works very well, it seems to be a problem specific to the admin user account.

  If you encounter any problems with your Microsoft account, you can try running the troubleshooter in Microsoft Accounts. It is an automated tool that can find and automatically fix some problems. It is available in English only, but will work in all languages.

  http://go.Microsoft.com/fwlink/?LinkId=268424

  After you run the troubleshooter, an update with the status of the issue.

  Hope that the information provided is useful.

• iPhone music synchronization issue? Help!

  Hello, I was wondering how can I get iTunes to stop taking random songs on my iphone? I keep trying to synchronize and even though I have about 28GB of available, it will not put the songs on? and it usually takes off of my same Favorites deleted all my photos. and I deselected option "import only checked in the songs" so, as I don't know? Help please?

  I would recommend that you let your library checked except for all the elements that you would normally jump and exclude from your device, like a bonus interview track, then set this option back on.

  If you enable the sidebar (Ctrl + S), select the device in the sidebar, and then look at music in the device, see greyed on circles dashed against some of the tracks? If so the following approach should resolve things. They assume that all the content you want on the device in your lending library for the restoration. If not see recover your iTunes from your iPod or an iOS device first. I would also recommend you copy everything off of the camera, if you have not already.

  1. Backup device.
  2. Restoration as a new device.
  3. Restore the backup that you made earlier.

  Use a backup encrypted if you want to keep passwords, wi - fi settings, history and health web data as appropriate.

  TT2

• I have a virus on my iPhone 6's Safari, please help!

  Accidentally, I clicked on a link while browsing on google images and it took me to this site which would allow me to get out of the page. When I tried to type in another link in the search at the top of the page bar, it generated just a draft e-mail to my personal e-mail with the subject being ' Email us for Apple Technical Support "with a phone number (which is not the number of care real apple). I restarted my phone and when I turned it back on and connected to the safari, he appeared like normal tabs except that when I tried to leave the virus tab, it took me another project of email saying the same thing as before. My screen is also frozen when I'm on safari and I can't do anything on safari. When I come to have safari open app and I'm not to touch anything, the project to send STILL appears! Help, please!

  Tap Settings > Safari and tap to clear the history and data from the Web site and then restart your iPhone.

• zone recovered win7 won't let me put in DST and window different scrolls strange acts please help

  recovered data to dell key win7 and I had to load a bunch of update would have this effect of programs

  Hi Vivremm,

  1. what happens when you try to change the date and time are you get any message of error?

  2. what exactly is the problem we are facing with Windows?

  No update of Windows, to keep your PC safe and running smoothly.

  There are different types of updates. Critical updates or security updates protect against malware and security exploits vulnerabilities. More updates, correct the errors that are not related to security, or enhance the functionality.

  Each time a new update is essential to avoid a newly discovered operation or prevalent targeting Windows users. Windows Update can be configured to install updates automatically as long as the computer is connected to the Internet

  I recommend you to check the date and time, see the procedure in the following article.

  Change the display of dates, times, currencies, and measures

  Please provide us with more information about the issue so that we can better help you.

• Windows 7 download bandwidth is strangely throttled, please help.

  Hi all

  Thanks for reading this.

  Here's my problem. I have my desktop PC running windows 7 Professional 64-bit (authenticated copy) connected wireless to a router connected to a modem cable (Time Warner Cable). I'm supposed to receive 40mbps 5 Mbps upload speed and download speed. This is where it gets strange. My home PC download gets only 2 Mbps but my upload is getting 5 Mbps. I thought it was very strange.

  Here's what I did:

  -J' I brought my laptop to friend, and his link windows professional wireless 7 to 40mbps on my router connection / Wireless even (which suggests that this is my desktop PC which is the problem)

  -My ipad and android phone on speedtests also get 30-40mbps when it is connected to the wireless router

  -J' got a new card wireless (thinking it was the USB dongle) and he's still only 2 Mbps (this is a link Wireless N PCI express - TP-4800)

  -J' tried a connection to the local network through my on-board GB ethernet to the router, still 2 MB/s download, 5mbps download

  -J' have switched Internet Options-> connections-> Lan Settings-> automatically detect the settings off (someone else said that fixed their problem) box

  -J' disabled carbonite, audio, anti-virus (sophos) and many other non-essential services in the services section of the Manager of tasks without result.

  -J' started in the safe mode and still download 2mbps

  -J' tried to add the following registry key based on someone of another experience DWORD32 HKEY_LOCAL_MACHINE->SYSTEM->CurrentControlSet->services->LanmanWorkstation->Parameters->DisableBandwidthThrottling 1

  -Download less than downloading is very suggestive that something is limiting the bandwidth to download on my PC only... I can't understand what he...

  My desktop PC is an AMD A10 7850 k kaveri CPU with the gigabyte card mother/AMD chipset drivers last A88x - D3h Council, and I tried several wireless and wired adapters and for some reason, it's just this PC. I have sophos AV installed and he was not accused of any threat to this system, nor I web practices to high risk.

  Any help on this would be greatly appreciated! Thank you

  OK... so I think I solved the problem.

  Here's how. I have Accelerator disabled random networks AppEx and wam! immediately improved bandwidth. In fact, I can check the box on and it slows down, uncheck the box and immediately my changes 1-2mbps to 50mbps. No other changes have been made except this one.

  It's crazy. It is supposed to speed things up, but it does the opposite. Mabye it's just with my material, but if it can help someone else, I'll be happy.

• Unable to connect to the internet/driver issues please help :(

  Hello. I installed a new copy of Windows 7 Ultimate 64 bit on my computer. Everything works well except for two pilot numbers. I also can't connect to internet at all no more. I guess it's because of one of the pilots. The two drivers that I have problems with the network controller driver is a unknown device in the PCI Bus. Nothing is connected to this Bus by the way. It just says: unknown device. My laptop is a HP Pavilion G6 2123us. I tried all the drivers for this laptop on this site and none have seemed to solve the problem. I looked really hard now and it's pretty frustrating

  More information that I can give is the ID of equipment for both pilots:

  Driver network controller hardware ID:

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
  PCI\VEN_168C & DEV_0032 & CC_028000
  PCI\VEN_168C & DEV_0032 & CC_0280

  Unknown Device hardware ID:

  ACPI\HPQ0004
  * HPQ0004

  I wasn't sure what hardware IDs to give, so I just posted all the. I hope someone can help me please. I greatly appreciate it.

  Hello:

  You need this driver...

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

  and this driver...

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-105047-1&CC=US&DLC=en&LC=en&os=4063&Product=5273777&sw_lang=

  Paul

• Virtual disk strange behaviour - please help

  Hi all

  I wonder if anyone can help. I started to experience a strange problem on one of my VM today.  I have a virtual machine running freenas.  The storage drives the actions of free storage to sit on are physical disks connected directly to the virtual machine and run normally, because of the way the works of freenas real HDD can be small enough and for the virtual machine, it's a prealloue virtual disk is 16 GB in size.  It is the only virtual machine sitting on a physical hard drive 256 GB. Today, I noticed a problem that the file for the virtual machine has become 240 GB in size, is probably not a normal behavior for a 16 GB VM.

  I checked snapshots which he had two auto protect snapshots which I deleted and disabled auto protect. This was reported to the size of the folder up to 182 GB.

  On the use of exploerer to view the folder it seems to be a large number of files, as shown below. Can someone explain if it should be there?  Also, how else remove them safely.

  Thanks in advance

  Thanks for the offer, but after a lot of interference and a virtual machine rebuild I managed to solve the problem.

  The solution was to set the 2 drives physical independent mode with persistent active. for some reason unknown to me this seems to prevent the creation of multiple disk files, it seems workstation creates them even when there are no snapshots.

  Time will tell us but seems to have solved the problems. Fingers crossed

  Thanks for all the help guys.

• Photon: Ringtone issue Please HELP!

  My father has a motorcycle Photon 4 g the next day it came out and everything was going well until the day one of his contacts called and the default ringtone is out rather than custom it they assign. Made all to remove the battery for a while, the factory reset and also it took to Sprint and they checked it and also a factory reset and none of these things worked, so to the they gave him a new, but the problem persists. Someone now, any difficulty or if Motorola has an update on how to fix it? Just in case, everything is stock. Any help would be grateful.