IPhone 4S brick after put 9.3.5 updated
I have an iPhone 4S which recently prompted me to download and install the latest 9.3.5 update. At halfway through the process stopped updating, and now the phone keeps stuck in mode 'connect to iTunes '.
I tried restore and update regularly through iTunes as well, and the restore process ends with an error (29). Error message is:
The iPhone "iPhone" could not be restored. An unknown error occurred (29).
1. my phone is a factory unlocked phone, so no Jailbreak etc has never been done
2. I was able to update my phone until 9.3.4 with no problems before this
3. I changed the usb cords, computers etc.
4. my iTunes is the more up-to-date version.
Has anyone else seen this problem as well on the other iPhone 4S? Any ideas on how to solve this problem?
just tried to do the same thing on my 4S - bricked with the request to connect to iTunes - which did not help if - error 29 (or 39?) ensures the Outlander when I have that either opt to choose to update or restore
Tags: iPhone
Similar Questions
-
IPhone SE lag after put 9.3.2 update
Hi all!
2 months ago I bought a new iPhone t-mobile SE.
After the 9.3.2 update, I noticed accused for example: on the home screen, during the games (BBTAN, Jetpack Joyride etc.) when the phone is automatically set the brightness of the screen.
(I noticed this when I went from the shadows in the light of the Sun)
Is there anyone who has noticed this problem... or... What can I do with this...? !
Thank you
Best regards, David
(and sorry for my bad English)
Do you get low memory warnings?
Try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (10 to 20 seconds).
-
My iPad 2 Mini is frozen after put 9.3.1 update
How can I restart my iPad Mini 2 after it completely closed after IOS 9.3.1 update >
Force the restart (does not affect the settings/data/music/apps/etc)
1. press and hold the sleep/wake button
2. press and hold the Home button
3. hold both buttons until the screen turns off, then back on with the Apple logo.
-
IPhone 6s bricks after updating iOS 10
I am of the unlucky few phoning in brick to the iTunes screen or the iOS 10. now I was not back up my phone ahead, and now I do not know how to actually use my phone or attach it bricking. Help, please
Recovery mode > If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support
-
iPhone 6 less sensitive after put 9.3.3 update
I have an iPhone 6 16 GB with operating system 9.3.4. After 9.3.3 update my phone started to slow down and block. That, the phone at any time. When the phone hangs up, I can't get to restart by the locking of the two buttons and the home method. So far, I've done the following: reset the cache, reset the system settings, resetting the phone, disable javascript, may reduce transparency, reduce motion blur, disable health settings and deleted about 5 GB of music storage. What is the next logical step? The phone is less than 2 years.
I assume you mean that you have improved your iPhone 6 of 9.3.3 to 9.3.4, not the other way around as you posted... correct?
If Yes, then based on what you have tried so far, I would say that you take a go-Genius Bar at your local Apple store to make them take a look.
-
IPhone 5 s not charging after put 9.3.4 updated and now no battery left.
A few days ago that I updated my iphone to 9.3.4 5s since then it shows that he is in charge when it is plugged to a wall mounted or portable charger but is not fresh. And now there is no battery to turn the phone on. After charging for hours it finally turned on with 2% and in a few minutes, it was drained. Once again no battery power. Please suggest if someone is faced with a similar question and that he had a solution for this problem.
Hello
Follow the steps here, including the verification of the charge for debris socket:
If your iPhone, iPad or iPod touch won't charge - Apple Support
-
Messages app does not split view after put 10.11.2 updated
My apologies if this is covered elsewhere, but it is a problem that arises for me after I've updated from El Capitan version 10.11.1 version 10.11.2
Following the update of the system, the application messages appears more correctly in split view. I can put messages and a second application in mode split as normal, but the message window is not reduced to fit in his half of the screen (the second app sits on her side of the screen and resizes properly). The electronic app continues to fill the entire screen, with the second application instead 'window' is blocking half of the messages window when the second application is active, or with the second window app entirely hidden by the messages app when messages is enabled. Messages worked normally in split in 10.11.1, it has started having this problem then I upgraded to 10.11.2 and it does appear that the messages app that does this.
Hello
I would like to start by a reset the NVRAM
How to reset the NVRAM on your Mac - Apple Support
21:29 Sunday; December 20, 2015
iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
a few iPhones and an iPad -
iPhone 6 ~ freeze after IOS 10.0.1 update
Just after have downloaded you the new IOS 10.0.1 software on my iPhone 6, some of my applications, like sending TEXT messages, emails and other applications where you type the words, the screen freezes and I have to restart my iPhone. I backed up my iPhone to my computer restored my phone, retelecharge 6 10.0.1, IOS reinstalled my backup files; However, my phone is still freezing... Everyone knows this problem or does anyone have any suggestions on how to remedy this situation?
Hi Watanabj66,
Thank you for updating your iPhone on iOS 10! I understand the importance having a device that works is made for you. Kudos to restore the device to solve the problem. If after restoring your backup files freeze returned, the problem may be with the files itself. You can try to restore the device once more using iTunes on your computer, set up as a new device, and then test the functionality of the iPhone IOS 10. If it works as expected, try to reinstall the applications from the App Store instead of restore from the backup, then if use you iCloud you can log in and add your Contacts, calendar, etc. back to the iPhone.
First of all, we will make a backup of your iPhone:
The backup of your iPhone, iPad and iPod touch
The link below can help you with the restore process using your computer.
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings
This should have your iPhone works as expected! Please use the Apple Support communities to post your question. Have a great day.
-
malfunction of the "home" iPhone button 5 after iOS 9.2.1 update
I was wondering if someone can help me. I updated my iPhone 5 today and after updating my home button wasn't working properly. I am able to hold down the home button and Siri responds, I can double click on the home button and the iPhone will list all my applications open, but when I open app and single click to minimize the application, the home button does not. It worked before I upgraded to iOS 9.2.1. After the update, I've also restored my iPhone to the latest backup.
Hi okbug1,
Thank you for your question. Have you tried to restore your phone?
Here's what you need to do.
- Connect your iPhone to your computer and back up all the content on your iPhone.
- Restoring iPhone. (You will find the button restore in iTunes homepage once you connect iPhone in)
- Follow the steps on your computer screen.
- Once the iPhone was restored, sign in using your credentials to iCloud and click on restore from a backup.
I hope this helps!
Axel Tempest
-
Battery drains after put 10.0.2 update
Since the update of my iPhone last night (10/01/16) my battery drains very quickly. Do not have this problem before the update. All the patches?
Greetings Willie9100,
Thank you for using communities of Apple Support.
I see that since the update your iPhone last night 10.0.2, your battery empty very quickly. You don't have this problem before the update. I can imagine trying to stop draining your battery. I'm happy to help you with this.
Please take a look to maximize the life of the battery and battery life and display battery usage information and to see what proportion of your battery used by each application, specifically, this section:
View the battery information
iOS 9 is designed to be the most efficient battery iOS ever. And it gives more specific ways to manage your device's battery life, because you can see the proportion of your battery used by each application (unless the unit is being charged). To view your usage, go to settings > battery.
There are messages that you can see below the applications you use:
Background activity. This indicates that the battery has been used by the application while he was in the background - in other words, while you were using another application.
- To improve the battery life, you can disable the feature that allows applications to background refresh. Go to settings > general > background App refresh and turn the switch to Off.
- If the Mail app lists substantive activities, you can choose to manually recover data or increase the recovery interval. Go to settings > Mail, Contacts, calendar > retrieve new data.
Location and the location of the background. This indicates that the app uses location-based services.
- You can optimize your battery life by disabling the location Services for the tour app in settings > privacy > location Services.
- In location Services, you can see each app listed with his permission setting. Applications having recently used location-based services have an indicator next to the on/off switch.
Home & lock screen. This indicates that the home screen or the lock screen has been posted on your device. For example, the display was awakened by pressing the Home button or by a notification.
- If an application frequently wake up your display with notifications, you can disable push notifications for the app in settings > Notifications. Push App and set allow Notifications to Off.
No cell phone coverage and low Signal. This means that either you are in a poor cellular coverage area and your iOS device is looking for a better signal or that you used your device in conditions of weak signal, which is reached in your battery life.
- You can optimize your battery life by turning on airplane mode. Drag up to open Control Center and press airplane mode icon. Note that you can not make or receive calls in flight mode.
Let us know if that helps.
Have a wonderful day!
-
1telephone 4S lights after put 9.3.3 update
I just uploaded my iPhone 4s to iOS 9.3.3 and now I can't turn on my iPhone. I restarted several times, but it still does not work. The Apple appears and it is stuck on the screen for a few minutes and then returns to the darkness. I tried everything, what should I do? I have synced my iPhone recently (last sync January) because I never had problems like this.
Hello
Try following the steps outlined here:
If your iPhone, iPad or iPod touch won't turn on - Apple Support
-
Kernel Panic after put 10.11.4 updated
After the El Capitan 10.11.4 day on App Store, my MacBook Pro 13 "Retina Display fails to restart and gets repeated the kernel panics.
I did the following steps to resolve this problem, and all have failed so far:
1. launch of the recovery disc and run disk utility check/repair - found no errors. Restart - the kernel panics.
2. launch disk recovery - run OSX reinstall 10.11.4 - Restart - Kernel Panics again.
I am currently restoring from Time Machine and have the feeling that this fails also to restart.
Someone at - it suggestions?
MacBook Pro 13 "Retina Display - El Capitan 10.11.4 (10.11.3 update attempt)"
Please post a copy of the image of here kernel panic.
-
Failure of Bluetooth subsystem after put 10.11.2 updated
Thanks in advance for any help! After the upgrade of 10.11.1 to 10.11.2, my bluetooth subsystem seems to have disappeared. Bluetooth no longer appears in system preferences and information system now lists "No Information found" under bluetooth. I did a reset of memory NVRAM and SCM, as well as the boot in safe mode and also remove com.apple.bluetooth.plist. Nothing did. My machine is a Mid 2015 15 "retina, i7 2.8 GHz with Radeon graphics option. Any help would be appreciated!
Please let me know if I can provide any useful information.
Reset the SMC (again) - that almost always corrects missing bluetooth problems.
FWIW, Bluetooth is available on my system after updating to OS X 10.11.2
Barry
-
WRT160N entirely in brick after having done the firmware update!
I saw not related to problems with my VOIP service this morning and quickly solved. I also did a priority to ensure that I was using the latest firmware for all my products. On the site Web of Linksys, I noticed that there is an update! Perfect, or so I thought.
I downloaded the version appropriate for my router and I continued to the interface of the router to date. I went to update firmware and everything was fine until what 98%...
He acted like he had disconnected the router (it was done on a solid line directly to the computer not a Wi - Fi connection). I disabled the router once I did realize that it did not work.
I tried to reset the router. No dice. I tried to ping the router. 100% packet loss.
IT BRICKED IT!
I decided to call technical support for assistance, but they informed me that the guarantee had, o so ideally just expired and I was on luck. So wait... Let me get this straight...
1. I buy your router
2. the router works perfectly for a year
3. update the firmware using the method described in the literature and using your firmware file
4. the router can not update and BRICKS
So, was it that someone else as lucky as me? What are my options at this point?
(Mod Note: under the guidance of the compliance of the directive.)
Try everything here first unbrick your router.
http://www.savemondo.com/2008/11/21/how-to-unbrick-a-Linksys-router/
Make sure that you have the correct version of the ready firmware.
-
CLC.exe stops running on the opening of the CC PS after put 14.1.1 updated
After the upgrade to CC 14.1.1 photoshop I get a report as follows
Signature of the problem:
Problem event name: APPCRASH
Application name: clc.exe
Application version: 0.0.0.0
Application timestamp: 4c5cc9f6
Fault Module name: clc.exe
Fault Module Version: 0.0.0.0
Timestamp of Module error: 4c5cc9f6
Exception code: c0000005
Exception offset: 000000000000a 620
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 3081
Additional information 1: e945
More information 2: e9453ece61423ab98d0ee5bd40bdd8d2
Additional information 3: be9a
Additional information 4: be9a4f994c98c3a8aa1b5294bf419e15
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0409
If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt
The newspaper of the Socialist Party is the following
Adobe Photoshop Version: 14.1.1 (14.1.1 20130910.r.414 2013/09 / 10:23:00:00) x 64
Operating system: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family: 6, model: 10, Stepping: 7 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading FP
Physical processor count: 4
Number of logical processors: 8
Processor speed: 3392 MHz
Built-in memory: 16367 MB
Free memory: 11594 MB
Memory available to Photoshop: 14700 MB
Memory used by Photoshop: 60%
Tile image size: 1024K
Image cache level: 4
Display: 1
Limits of the display: top = 0, left = 0, low = 1200, right = 1920
OpenGL drawing: enabled.
OpenGL allows old GPU: not detected.
OpenGL drawing mode: Advanced
OpenGL allows Normal Mode: true.
OpenGL allows Advanced Mode: true.
NumGPUs = 1
GPU [0]. OGLVersion = "3.0".
GPU [0]. MemoryMB = 1024
GPU [0]. RectTextureSize = 16384
GPU [0]. Renderer = "ATI over-pants V4800 (FireGL)" "
GPU [0]. RendererID = 26824
GPU [0]. Vendor name = ' ATI Technologies Inc.
GPU [0]. VendorID = 4098
GPU [0]. HasNPOTSupport = 1
GPU [0]. DriverVersion = "8.773.1.2000."
GPU [0]. Driver = "aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64. dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a. CAP, atitmm64.dl l.
GPU [0]. DriverDate = "20110412000000.000000 - 000.
GPU [0]. CompileProgramGLSL = 1
GPU [0]. TestFrameBuffer = 1
GPU [0]. OCLSupported = 1
GPU [0]. OCLVersion = ' ATI-Stream 1.1 - v2.2 (302).
GPU [0]. CUDASupported = 0
GPU [0] .glGetString [GL_SHADING_LANGUAGE_VERSION] = '4.00 ".
GPU [0] .glGetProgramivARB [GL_FRAGMENT_PROGRAM_ARB] [GL_MAX_PROGRAM_INSTRUCTIONS_ARB] = [214748 3647]
GPU [0] .glGetIntegerv [GL_MAX_TEXTURE_UNITS] = [8]
GPU [0] .glGetIntegerv [GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS] = [32]
GPU [0] .glGetIntegerv [GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS] = [16]
GPU [0] .glGetIntegerv [GL_MAX_TEXTURE_IMAGE_UNITS] = [16]
GPU [0] .glGetIntegerv [GL_MAX_DRAW_BUFFERS] = [8]
GPU [0] .glGetIntegerv [GL_MAX_VERTEX_UNIFORM_COMPONENTS] = [1024]
GPU [0] .glGetIntegerv [GL_MAX_FRAGMENT_UNIFORM_COMPONENTS] = [1024]
GPU [0] .glGetIntegerv [GL_MAX_VARYING_FLOATS] = [64]
GPU [0] .glGetIntegerv [GL_MAX_VERTEX_ATTRIBS] = [16]
.extension GPU [0] [AIF::OGL:GL_ARB_VERTEX_PROGRAM] = 1
.extension GPU [0] [AIF::OGL:GL_ARB_FRAGMENT_PROGRAM] = 1
.extension GPU [0] [AIF::OGL:GL_ARB_VERTEX_SHADER] = 1
.extension GPU [0] [AIF::OGL:GL_ARB_FRAGMENT_SHADER] = 1
.extension GPU [0] [AIF::OGL:GL_EXT_FRAMEBUFFER_OBJECT] = 1
.extension GPU [0] [AIF::OGL:GL_ARB_TEXTURE_RECTANGLE] = 1
.extension GPU [0] [AIF::OGL:GL_ARB_TEXTURE_FLOAT] = 1
.extension GPU [0] [AIF::OGL:GL_ARB_OCCLUSION_QUERY] = 1
.extension GPU [0] [AIF::OGL:GL_ARB_VERTEX_BUFFER_OBJECT] = 1
.extension GPU [0] [AIF::OGL:GL_ARB_SHADER_TEXTURE_LOD] = 1
Serial number: 91190705655137129130
The application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64-bit).
Temporary file path: C:\Users\001\AppData\Local\Temp\
Zero Photoshop has async I/O active
Scratch the volumes:
111.7 G, 31.7 G free starter
Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit) \Required\Plug-Ins\
Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit) \Plug-ins\
Installed components:
ACE.dll ACE 2013/07/14-12: 09: 50 79,543790 79.543790
adbeape.dll Adobe EPA 2013/02/04-09: 52:32 0.1160850 0,1160850
AdobeLinguistic.dll Adobe linguistic Library 7.0.0
AdobeOwl.dll Adobe Owl 2013/03/03-12: 10: 08 5.0.13 79.533484
AdobePDFL.dll PDFL 2013/03/13-12: 09: 15 79,499517 79.499517
Adobe AdobePIP.dll 7.0.0.1786 product improvement program
AdobeXMP.dll Adobe XMP Core 2013/03/13-12: 09:15 79,151481 79.151481
AdobeXMPFiles.dll Adobe XMP files 2013/03/13-12: 09:15 79,151481 79.151481
Adobe XMP Script 2013/03/13-12: 09 AdobeXMPScript.dll: 15 79,151481 79.151481
adobe_caps.dll Adobe CAPS 7,0,0,21
AGM.dll AGM 2013/07/14-12: 09: 50 79,543790 79.543790
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
aif_core.dll AIF 5.0 79.534508
aif_ocl.dll AIF 5.0 79.534508
aif_ogl.dll AIF 5.0 79.534508
Amtlib.dll AMTLib (64 Bit) 7.0.0.169 BuildVersion: 7,0; Brand: Monday, April 8, 2013 02:31:50) 1.000000
ARE.dll ARE 2013/07/14-12: 09:50 79,543790 79.543790
Axe8sharedexpat.dll AXE8SharedExpat 2011/12/16-15: 10: 49 66,26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15: 10: 49 66,26830 66.26830
Bib.dll BIB 2013/07/14-12: 09: 50 79,543790 79.543790
BIBUtils.dll BIBUtils 2013/07/14-12: 09: 50 79,543790 79.543790
boost_date_time.dll product DVA 7.0.0
boost_signals.dll product DVA 7.0.0
boost_system.dll product DVA 7.0.0
boost_threads.dll product DVA 7.0.0
CG.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
Adobe CIT.dll CIT 2.1.6.30929 2.1.6.30929
Adobe CITThreading.dll CITThreading 2.1.6.30929 2.1.6.30929
CoolType.dll CoolType 2013/07/14-12: 09: 50 79,543790 79.543790
dvaaudiodevice.dll product DVA 7.0.0
dvacore.dll product DVA 7.0.0
dvamarshal.dll product DVA 7.0.0
dvamediatypes.dll product DVA 7.0.0
dvaplayer.dll product DVA 7.0.0
dvatransport.dll product DVA 7.0.0
dvaunittesting.dll product DVA 7.0.0
Dynamiclink.dll product DVA 7.0.0
ExtendScript.dll ExtendScript 2013/03/21-12: 10: 31 79,535742 79.535742
FileInfo.dll Adobe XMP FileInfo 2013/03/19-12: 09: 02 79,151561 79.151561
filter_graph.dll AIF 5.0 79.534508
icucnv40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615
imslib.dll IMSLib DLL 7.0.0.116
JP2KLib.dll JP2KLib 2013/02/19-12: 28:44 79,248139 79.248139
libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)
libiomp5md.dll Intel(r) OMP Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0
LogSession.dll LogSession 2.1.2.1785
mediacoreif.dll product DVA 7.0.0
MPS.dll MPS-2013/03/15-13: 25:52 79,535029 79.535029
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
MSVCP90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
MSVCR80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
Msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
PatchMatch.dll PatchMatch 2013/06/11-12: 08: 08 79,542390 79.542390
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC CC
Adobe Photoshop CC CC plugin.dll
PlugPlugOwl.dll Adobe CSXS PlugPlugOwl Dll Standard (64 bit) 4.0.1.34
PSArt.dll Adobe Photoshop CC CC
PSViews.dll Adobe Photoshop CC CC
SCCore.dll ScCore 2013/03/21-12: 10: 31 79,535742 79.535742
ScriptUIFlex.dll ScriptUIFlex 2013/03/21-12: 10: 31 79,535742 79.535742
svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0
TBB.dll Intel Threading Building Blocks for Windows 4 1, 2012, 1003
tbbmalloc.dll Intel Threading Building Blocks for Windows 4, 1, 2012, 1003
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 7.0.1.102
WRServices.dll WRServices Monday, February 25, 2013 16:09:10 build 0.19078 0,19078
Required plugins:
3D Studio 14.1.1 (14.1.1 x 001)
Accented edges 14.1.1
Adaptive wide-angle 14.1.1
Angular Strokes 14.1.1
Average 14.1.1 (14.1.1 x 001)
Bas-relief 14.1.1
BMP 14.1.1
Chalk and charcoal 14.1.1
14.1.1 charcoal
Chrome 14.1.1
Cineon 14.1.1 (14.1.1 x 001)
14.1.1 clouds (14.1.1 x 001)
COLLADA 14.1.1 (14.1.1 x 001)
Halftone color 14.1.1
Color pencil 14.1.1
CompuServe GIF 14.1.1
Conté 14.1.1 pencil
Craquelure 14.1.1
Crop and straighten Photos 14.1.1 (14.1.1 x 001)
Crop and straighten Photos filter 14.1.1
Hatch: 14.1.1
Crystallize 14.1.1
Cutting 14.1.1
Dark strokes 14.1.1
14.1.1 deinterlacing
DICOM 14.1.1
Difference clouds 14.1.1 (14.1.1 x 001)
14.1.1 glow
Move 14.1.1
Dry brush 14.1.1
Eazel acquire 14.1.1 (14.1.1 x 001)
Embed watermark 4.0
14.1.1 entropy (14.1.1 x 001)
Extrude 14.1.1
FastCore 14.1.1 routines (14.1.1 x 001)
14.1.1 the fibers
Film Grain 14.1.1
Gallery of filters 14.1.1
3D Flash 14.1.1 (14.1.1 x 001)
Fresco 14.1.1
Glass 14.1.1
Scarlet contours 14.1.1
Google Earth 4 14.1.1 (14.1.1 x 001)
Grain 14.1.1
Graphic writing 14.1.1
Halftone Pattern 14.1.1
HDRMergeUI 14.1.1
IFF Format 14.1.1
Outlines in ink 14.1.1
JPEG 2000 14.1.1
Flattening coefficient 14.1.1 (14.1.1 x 001)
The objective 14.1.1 blur
Correction of the objective 14.1.1
Lens Flare 14.1.1
Liquefy 14.1.1
Operation of Matlab 14.1.1 (14.1.1 x 001)
maximum 14.1.1 (14.1.1 x 001)
14.1.1 average (14.1.1 x 001)
Measure Core 14.1.1 (14.1.1 x 001)
Median 14.1.1 (14.1.1 x 001)
Mezzotint 14.1.1
Minimum 14.1.1 (14.1.1 x 001)
MMXCore Routines 14.1.1 (14.1.1 x 001)
14.1.1 mosaic tiles
Multiprocessor support 14.1.1 (14.1.1 x 001)
Neon 14.1.1
14.1.1 paper
Color NTSC 14.1.1 (14.1.1 x 001)
Ocean Ripple 14.1.1
14.1.1 oil painting
OpenEXR 14.1.1
Paint Daubs 14.1.1
14.1.1 palette knife
Patchwork 14.1.1
Paths to Illustrator 14.1.1
PCX 14.1.1 (14.1.1 x 001)
14.1.1 photocopying
14.1.1 Photoshop 3D engine (14.1.1 x 001)
Photoshop Touch 14.0
Photo filter package 14.1.1 (14.1.1 x 001)
Pinch 14.1.1
Pixar 14.1.1 (14.1.1 x 001)
Plaster 14.1.1
Plastic wrap 14.1.1
PNG 14.1.1
Pointillism 14.1.1
14.1.1 polar coordinates
14.1.1 portable bitmap (14.1.1 x 001)
Poster edges 14.1.1
Radial blur 14.1.1
Radiance 14.1.1 (14.1.1 x 001)
14.1.1 range (14.1.1 x 001)
Read watermark 4.0
Crosslinking 14.1.1
14.1.1 the ripple
Rough Pastels 14.1.1
Save for Web 14.1.1
ScriptingSupport 14.1.1
Shake Reduction 14.1.1
14.1.1 shear
14.1.1 asymmetry (14.1.1 x 001)
Smart Blur 14.1.1
Smudge Stick 14.1.1
Solarize 14.1.1 (14.1.1 x 001)
14.1.1 splash
Spherize 14.1.1
14.1.1 sponge
Sprayed strokes 14.1.1
Stained glass 14.1.1
14.1.1 stamp
SD 14.1.1 (14.1.1 x 001)
STL 14.1.1 (14.1.1 x 001)
14.1.1 Sumi-e
14.1.1 summons (14.1.1 x 001)
Targa 14.1.1
Texture veneer 14.1.1
14.1.1 tiles
Torn edges 14.1.1
14.1.1 twirl watch
Draft 14.1.1
Vanishing Point 14.1.1
14.1.1 variance (14.1.1 x 001)
14.1.1 variations (14.1.1 x 001)
Viveza 2 2.1.0.22656
Water paper 14.1.1
Watercolor 14.1.1
14.1.1 wave
Wavefront | 14.1.1 OBJ (14.1.1 x 001)
WIA support 14.1.1 (14.1.1 x 001)
Wind 14.1.1
Wireless Bitmap 14.1.1 (14.1.1 x 001)
Zig - zag 14.1.1
Plug-ins option and third parties:
BackgroundFilter 2.2.0.22656
Camera 8.1 gross
Camera Raw Filter 8.1
Color Efex Pro 4-4.20
Color Efex Pro 4-4.20
Dfine 2 2.2.0.22656
FineStructuresFilter 2.2.0.22656
HDR Efex Pro 2 2.10
HotPixelsFilter 2.2.0.22656
Merge HDR Efex Pro 2 2.10
Nik selective collection tool 2.1.5.22621
ShadowsFilter 2.2.0.22656
Sharpener Pro 3: (1) RAW Presharpener 3.1.0.22665
Sharpener Pro 3: output sharpener (2) 3.1.0.22665
Silver Efex Pro 2 2 100
Silver Efex Pro 2 2 100
SkinFilter 2.2.0.22656
SkyFilter 2.2.0.22656
StrongNoiseFilter 2.2.0.22656
Plug-ins that could not load: NONE
Flash:
Mini Bridge
Adobe Exchange
Kuler
Install TWAIN devices: NONE
Hello, another user reported that he fixed his problem by updating the video card drivers: http://forums.adobe.com/message/5669907#5669907 (are your drivers for 2011...)
Maybe you are looking for
-
Cannot enable virtualization in my Bios Menu
I am trying to run Vmware virtualization on my pc, but to do this, I think I have to go in my system BIOS and enable virtualization. However, I think I have entered in my BIOS and could not fine any option for virtualization. Can someone help me plea
-
dxva2. Dill Why is happening to my pc? cause I got the proglem in my Skype account? Thank you good understunding
-
Satellite A500 - Vista and Windows 7 do not show remaining battery time
I have a Satellite A500-132 PSAM3E and VIsta/Windows 7 do not display battery remain only in %.
-
Need the card reader drivers Win7 memory for Satellite P200
Hi, I just installed windows 7 on my Satellite P200 but it doesn t t recognize the memory card reader. Does anyone have a solution or do I have to buy a USB memory card reader? Thank you
-
Hello! It's Photos for Mac. When I installed first of all the pictures, all my photos (or almost all...) were copied from iPhoto, including two panoramic photos. They are the only ones in this folder. I tried to do more panoramic photos with my 6 i