iPhone 4S connects not to the PC under Windows 7 64-bit

Similar Questions

• Multiprocessor Configuration does not support the installation of Windows 7 64-bit.

  I'm going as a joint discussion on the multiprocessor Configuration not supported during the installation of Windows 7 64-bit. I have a HP with a motherboard HP xw6200 workstation. The Machine has dual Zeon 3.20 Ghz. the procesors are identical. There bus 800 MHZ front. It has 6 gigs of 400 MHZ DDR2 Ram. I've updated to the latest version of the bios a few months ago. It has worked very well in dual boot with the last pack of 64-bit XP and Vista 64-bit SP1 for a long time. I tried to upgrade using a clean 64-bit Windows 7 installation when I got the error Stop Multiprocessor_Configuration_Not_Supported: 0X0000003E. I tried to upgrade to Vista and XP with the same error message. I also installed a new unformatted disk and tried to install the operating system again through the CD and got the same error.

  Hi ITCoreTeam,

  Welcome to the Microsoft Answers community.

  Test the material under test once, by contacting the manufacturer. The problem is caused due to hardware.
  Cause: This situation can occur if the incorrect processor packages are used or if the BIOS incorrectly allows a processor erratum.

  Download the update available in the link below and install it. It may solve your problem.

  http://support.Microsoft.com/kb/973879/

  I suggest you have a look at the similar problem and the troubleshooting steps by visiting the link below.

  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/thread/b993c1f9-A1E2-4023-bc7a-0507189a1b8c

  I suggest you to contact the manufacturer of the computer to update the chipset drivers as you have updated the BIOS of your computer.

  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Firefox 16.0.2 not completing the installation under windows 7 and keep doing tests of compatibility of modules and asking me if I want to send feedback to Mozilla

  It works as if it were the first run after update. The point is that it never ends. After each launch it going tru the whole cycle as if it were installef for the first time.

  I used the tool 'reset the firefox' under 'Help' and, after two cycles of launch, it stops the weird behavior. Thank you very much for your reply Cor - el. I think that under a way not channeled, the mentioned tool interpreted some procedures that you propose.

• HP Laserjet M1319F MFP is not able to scan under Windows 7 (64-bit at home)

  I have a Windows 7 Home Premium 64 - bit HP Pavilion connected to the HP Laserjet M1319F MFP. All the functions of the printer worked so far.

  The scan function has stopped working. Here are the steps and errors that I see:
  1. I load the sheet from which I scanned in the printer and the printer displays
  2. I start Windows Fax and Scan dialog box and press the button new scanning
  3. New Scan, dialog and I press the Scan button
  4. the printer begins to feed the sheet and displays
  5. immediately after the message that the printer displays the message
  6. a message with the dialog box titled error, and after I press OK another dialog box with Windows Fax and Scan title pop-up.
  I did the following steps to try to fix the scan:
  1 uninstalled the printer and it added. Scan still does not work.
  2. I downloaded the latest driver and firmware on HP site updates and installed on the PC and on the printer firmware. I had success on the driver and firmware of the facilities. Scan still does not work.
  3. I ran PC-Doctor hardware diagnostics on the printing device and got a status of success. The Test page printed successfully.
  4. I am able to print documents, but will not scan. I tried both ways - single and multiple - sheets. Scan still does not work.
  Any suggestion would be appreciated.

  Hi ApolloWZ,

  Thanks for your quick response.

  In the meantime, I found the solution to my problem, so I thought I'd share it here for others.

  I found the answer here:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/can-t-scan-from-M1536dnf-after-reformatting-computers/TD-p/3914820

  I will cut & paste the answer below, in which case the link above doesn't work at some point:

  (1) on the computer target under the normal user account, press Start, in the search box type services.msc. Right click on the program that appears and select "Run as Administrator". Enter your user password or click on next to go to the UAC popup, if necessary.
  (2) locate the service called "Windows Image Acquisition (WIA)" and double-click it.
  3) click the connection tab, and then change this service to log on under a Local System account. Click here to allow the service to interact with desktop. And then click OK.
  (4) reboot (or if you really don't want to restart & know what you're doing, you can just stop & restart the WIA service twice)

  See you soon,.

  Gary.

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• can not run the program in Windows 7 64 bit xp mode

  I have a problem running a program that runs perfectly OK under Vista 32 bit and XP with sp3, however do not work in virtual XP mode or on a WIN7 64 bit system.

  I uninstalled XP mode and made a new installation with no luck.

  Went into the tab compatibility properties and selected OS, he worked under.  (Which was XP sp3 and Vista SP1)  Did not work.

  In XP Mode, the program launches but does not see the USB stick files are on, he needs to interface with.

  In Win7, the program launches and can see the USB files are on... but wont interface with them.  Messsage says "another program can use this disk.

  As the program is running in XP systems, which prevent to in Virtual XP in Windows 7.

  Any help is appreciated!  Thanks in advance.

  Hello

  I suggest you to ask your question at the following link.

  Windows Virtual PC and XP Mode

• Excel 2007 does not color the cells under Windows 7. __

  I installed Microsoft office 2007 when I've upgraded Windows XP Pro to Windows 7 Pro.
  Now I can't color the background or in the foreground of my Excel cells.
  This situation does not occur with Word: I can use any color I want when I write with Word 2007.
  The curious thing is that if I read old writings of Exel 2007 with Windows XP Pro file I can see colors in the cells of this file.

  I installed Microsoft office 2007 when I've upgraded Windows XP Pro to Windows 7 Pro.
  Now I can't color the background or in the foreground of my Excel cells.
  This situation does not occur with Word: I can use any color I want when I write with Word 2007.
  The curious thing is that if I read old writings of Exel 2007 with Windows XP Pro file I can see colors in the cells of this file.

  Not really a question for this forum.
  I suggest you post to a group dedicated to Excel where you can get assistance much more expertise.

  Groups of Excel

  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Excel.NewUsers

  In your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Excel.NewUsers

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you! http://GordonB-p.spaces.live.com/blog/

• Problem connecting more of 20 computers under Windows 7 64-bit

  I just build a PC, Windows 7 Pro 64 bit and shared hard drive of about 25 computers he uses as a render farm.

  problem occurs when I try to connect more than 20 computers and as an error shows that it has reached its connection limit. Tried to change advance sharing users 20 to 30 but can not. Is there a way to get around this or is that windows 7 can not be supported more than 20 computers on a network?

  Thank you...

  I just build a PC, Windows 7 Pro 64 bit and shared hard drive of about 25 computers he uses as a render farm.

  problem occurs when I try to connect more than 20 computers and as an error shows that it has reached its connection limit. Tried to change advance sharing users 20 to 30 but can not. Is there a way to get around this or is that windows 7 can not be supported more than 20 computers on a network?

  Thank you...

  Windows 7 has a limit of 20 computers as described in the agreement (EULA).

  " Device connections. . "You can allow up to 20 other devices to access the software on the licensed computer to use file Services, Print Services, Internet Information Services and Internet and Telephony Services connection sharing only.

  http://www.microsoftstore.com/store/msusa/en_US/DisplayHelpEULAPage

• Qosmio G50 will not complete the installation of Windows 7 64 bit

  Hello world!

  I recently wanted to updated my Qosmio G50 - 12f 32-bit from vista to 7 ultimate 64-bit. I did a clean install: formatted the c partition.

  Everything seemed to work fine until the screen "Setup is preparing your computer for first use. At first, I thought it froze just would not go further. Back to zero (in all modes) would get the same effect.
  But to my surprise and pleasure, she managed to pass this point when I desperately wanted to wait long enough for a miracle to happen. But the problems remain. The configuration process is right! REALLY! slow. I could painfully spend the first screens, like enter the name of the computer, activation screen, modes of security, but with a very long wait time between each. And every time he reaches this final screen of security modes that she would suddenly go to a BSOD:

  Driver power state failure
  STOP 0x0000009F (0xFFFFFA800193DD70, 0xFFFFF80000B9C518, 0 x 0000000000000003, 0xFFFFFA80029C8610)

  Please, anyone have any ideas on how to solve this problem?

  Of course, there should be a driver problem, but how do I update all the drivers without operating system running? I've seen such a feature in the repair of the installation DVD section, but it accepts only .inf files.
  And I can t find those anywhere on the toshiba support website. Only the .exe that you run from your operating system that is already running.

  In any case the Qosmio G50 was not as incompatible with 7-64 bit. So I'm a little confused here!

  Please help ^ ^

  Hello

  I want to ask you about the Windows Vista Dvd disc. Is - this original type one or more of the Assembly?

• Could not save the sound in windows 7 64 bit with Conexant Smartaudio HD

  Facing problem in sound recording & speech recognition in my laptop installed with Windows 7 Home Premium (64-bit).

  Audio by default in my portable device is HD(Driver version 8.54.0.53; date 18-02-2011) Conexant Smartaudio.
  The system is not able to any sound during recording. Verified that the microphone is not muted

  Hello

  It gives you no specific error message?

  If I had the same problem, I tried the methods to solve the problem.

  Method 1:

  I suggest you try to use the Audio playback problems troubleshooting to solve the problem. Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method2:

  I suggest you to update the driver on the manufacturer's Web site.

  See the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-75899-1

   

  See also the link below:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  If this problem persists please post us. We will provide you with additional options that you can use to get the problem resolved.

• Satellite L500-1UU - can not see the FN on Windows 7 64 bit cards

  Hello

  Although the FN buttons work, when I bought this computer firstly I was to see a Panel and watch of the operations of the forces NOUVELLES. However, now I don't see this Panel when I push the FN key. I put t know what happen and how can I solve this problem. I uninstalled vap and installed again.

  Can someone help me?

  Hello

  try to install the utility of technical support of Flashcard [drivers Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] you can also try to restart flashcard support in the utility folder of Toshiba (go start-Toshiba utility)

  Post edited by: Jeka-HE

• Dell Inspiron brightness (FN + F4/FN F5) keys not working only not on the operating system Windows 7 (64-bit)

  Hello.

  I bought a Dell Inspiron N5110 for my son who has vision problems. The laptop has been brilliant, but now he is suddenly unable to use the keys FN + F4/F5 to turn down the brightness. The F4 main movements only 1 level of maximum brightness and it has meant he is unable to use the laptop because it's too bright. I tried to re install different drivers from the Dell Web site without success.

  I hope someone can help out us here as the laptop is crucial for the education of my son, especially given his eyesight problems.

  Thanks in advance to anyone who can help me.

  Hello.

  I just managed to solve the problem. I uninstalled Teamviewer and the FN keys began to work properly.

  I then installed the latest version of Teamviewer and the keys still work very well.

  Thank you very much for all your help resoling this issue.

• Icons not shown in CS4 under Windows 7 64-bit

  I can't Photoshop icons to display pictures in Windows Explorer (Windows 7 Pro 64 bit, Photoshop CS4).  Anyone has any idea on this?  The 32-bit version worked well.

  (Blue with PS logo on them) icons or thumbnails (small images of your file)?

  In Photoshop 64 bit Preferences > file management, make sure thumbnails is checked.  Maximize PSD/PSB compatibility is set to "always".

  Windows cannot display the PSD thumbnails by itself. You need a third-party codec.

  SageThumbs

  http://www.cherubicsoft.com/en/projects/SageThumbs

  is free to use.

  How: view PSD thumbnails in Windows after installing Photoshop  Read this to understand what are the codecs and why you need it.

• Acer Scanprisa 640U: how to work under Windows 7 64-bit

  I have an Acer Scanprisa 640U scanner that works under Windows xp using Mirascan 4.03. I now want to use the scanner under Windows 7, 64-bit, but that the program is installed it gives me every time "Scanner is not found."

  You need the specific manufacturer win7 drivers scanner, if they produce such for Win7 or Vista 64-bit

• Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Kev2012 wrote:

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  It would depend on what you're trying to link to?

  Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support