iPhone 5 (iOS 10.0.2) with iTunes (12.5.1), sync has failed to start.

Similar Questions

• System startup with the following error: this application has failed to start because BHO. DLL WAS NOT FOUND.

  Original title: APPS

  WHEN I TURN ON MY COMPUTER, A BOX IS DISPLAYED THAT SAYS: "THIS APPLICATION COULD NOT START BECAUSE BHO.» DLL WAS NOT FOUND.

  REINSTALLING THE APPLICATION MAY FIX THIS PROBLEM... The APP IS ie3sh.exe... I DON'T REMEMBER TO UNINSTALL ANYTHING... I have

  THE THING OF RESTORATION WHERE YOU PUT THINGS BACK THE WAY THEY WERE AT A CERTAIN DATE... BUT THAT WAS BEFORE THE

  MORE DATE OLD HE SAID I COULD GO BACK, WHAT HAS NOT HELPED... I ONLY AM NOT COMPUTER SAVVY, SO IF YOU HAVE AN ANSWER, PLEASE

  BREAK IT DOWN STEP BY STEP... P.S. THANK YOU I USE WINDOWS VISTA HOME PREMIUM... AND I INSTALLED ALL IMPORTANT

  UPDATES... I HOPE I'M THIS SENDING TO THE RIGHT FORUM...

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Also try to scan your hard drive for Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• IOS 10 is compatible with iTunes 12.2.2?

  My MacBook is old, and the last Mac OS can I run 10.7, which means that the last version of iTunes that I can run is 12.2.2. This allows to work with my iPad without problem from the Air, but never worked with my iPhone IS initially provided with iOS 9.

  The iPad don't often synchronize with my MacBook as it backs up from iCloud, but I wanted to put a few audio tracks on it. I tried today and it does not work. I get an error message "iTunes could not connect to the iPad" * iPad "because an invalid response was received from the device."

  I get the same messages with my iPhone SE. My guess now is the iOS 10 did update my MacBook even more obsolete by not being able to sync with my iPad. I searched around and can't find any configuration required for iTunes for iOS 10, so I'm not 100% it is the case.

  Is there any solution for this? Or is my correct guess, that iOS 10 is not compatible with iTunes 12.2.2?

  In addition, if it is not compatible, if someone has a solution of how to get music from my MacBook on my iPad (I noticed Amazon Music allows me to download tracks and then download them on my iPad, but with a limit) then I would appreciate if you could share!

  Thank you

  I'm afraid you're right. IOS10 requires iTuses 12.5

  As workaround solutions, I'm sorry, I don't have. I'm not a mac I have sync music on.

  But maybe someone else can help you

• Update iPhone 4 iOS 7 and restored from iTunes, but still called to restore/establish new

  With the help of iTunes on OS X, I first saved my iPhone 4 and then selected Update.

  When it was full, the phone rebooted, then once I had entered my language and region, he gave me 3 options to Set Up iPhone:

  • -Set Up as new iPhone
  • -Restore icloud backup
  • -Restore from iTunes backup

  So I proceeded to restore from iTunes, by using a backup from before the upgrade.

  My problem: applying the restoration has not gotten me a more far - the phone brings back me to the page select a language, then back to the above 3 options. I tried once again sync in iTunes, but also backup to restore, nothing helps. WiFi is on, and I can see my mobile operator name in the upper left corner, so the phone is certainly up and running, but I can not go beyond the stage of installation.

  

  Which will be * restore iPhone *? It takes back me to iOS 4? With my phone already restored and now successfully upgraded from iTunes, how can I'm past the stage of configuration?

  You cannot restore an iPhone with iOS 7 aboard a backup performed on iOS 6 or an earlier version. Most likely, it is the cause of the problem.

• I can access and modify current credit card info in apple pay on iphone 6 ios 9.3.2 with new expiration date?

  My salary of apple has not worked at whole foods, walgreens, or sephora. I think I may need to update dates of expiry on the maps, but I can't find where to change it or even see the information to check it out. do I have to remove the current cards and replace them with the new? can I access current information in order to determine if this is my problem?

  You can probably remove and re - enter the map.  Settings > portfolio & Apple pay unless the credit card is also the default value, the one you use with your Apple ID.  In the latter case, go to settings > iTunes & App Store > Apple ID > review Apple ID > payment information to update your card information.  Yet once, you may need to remove and re-add the map here.

• Why deletion of images of iPhone 4, iOS 7.1.2 with Capture of Image does not work?

  Using the key delete does not work and selecting 'Remove' in the edition menu is grayed out.

  Hi Varoop13,

  Thank you for using communities Support from Apple! I'm sorry to hear that you're having these problems with your iPhone and Capture of Image. I'm a little unclear on exactly which version of Mac OS X you are using or what you see in the Image Capture, but you may want to look for a button with a circle-slash () icon; It's recent releases how Capture of image mark the delete key. It will be active when one or more images have been selected. It is also a behavior whereas the keyboard delete key will not remove the images selected, and that the delete option under the Edit menu stay grayed out. You can see some of these options, it is stated in the following article:

  Use the buttons at the bottom of the window to Capture of Image to display thumbnails in a list () or to display larger thumbnails (), or to rotate () or delete () images.

  Transfer pictures - Image Capture help

  Concerning

• I restored my laptop to factory settings. When I reinstalled iTunes music to my iPod synced with iTunes but don't sync back with the iPod classic. Help why does?

  How to get music on my iPod? Is this possible? Help please I spent hours to try!

  In general try to sync an iPod with an empty library will remove the contents of the device. Except purchases of synchronization is iTunes to the device, even if the purchases can be copied into the other direction. See recover your iTunes from your iPod or an iOS device and make sure that you have really all media stored on the device and not, for example, a display of your purchase history is stored in the cloud.

  TT2

• Problem with updates on Windows 8 - Configuration has failed & returning Exchange

  First of all

  I want to apologize for asking questions about the problem which has been solved so many times...

  ... and yet it seems that no solution applies to / solved my problem.

  Let me describe my situation and context "briefly":

  I have install Windows 8 Pro, I have installed in September 2012. I had been provided with Win 7 and Win 8 activation as a computer SCIENCE student keys during my studies. I have not used 8 win a lot since I preferred Win 7 and I only wanted to test the 'product '.

  Judging by the time when previous updates have been installed, the system was launched several times in March 2013, December 2013 and January 2014. After that, the system "folded" so far. When I launched the system on 26.07.2015 there was like 50 updates that have been prepared (or wanted to be installed... Let's say "pending"). About 30 of them installed successfully. Then I double-checked. I used to double check the availability of updates when some fail to install (mainly from my previous experience that sometimes an update is no longer necessary when another installs).

  Now, to the point...

  I have 133 major and 3 optional updates that want to be installed. Everything that I select (few of them), or all of them fail to install. Installation begins normally, then needs to restart (all) and during the nex to the top starting, the updates can "Configuring updates... 98% ' and then fail and are starting to go back.

  The system is more or less vanilla installation with some basic drivers and the 3DMarks so I doubt that I've caused this problem.

  I've been googling and try to solve this problem for 5 days now, here's what I found:

  1. first of all, I tried sfc / scannow to see if there is any corruption. I received the message that some files were corrupted and could not be repaired. The launch of 6 and 7 of this order, I finally got the "Windows Resource Protection has not found any breach of integrity." (it is true however that I tried a lot of solutions in the meantime). However before that, the CBS.log newspaper included information that:

  Cannot repair Member "utc.app.json" file

  (also of telemetry ".") "ASM - WindowsDefault.json" and I think that 'Amd64\CNBJ2530. PBO' have been mentioned... several times)

  But as I said, from this moment I do not have this problem.

  2. because I had problem with CFS, I tried DISM.

  ScanHealth gave:

  The component store is repairable.
  The operation completed successfully.

  However, RestoreHealth was not optimistic:

  The restore operation failed. Be the source of repair was not found or the comp
  onent store is not repairable.

  The journal includes:

  Preparation of control system was updated.

  Summary:
  Operation: Detect and repair
  Result of the operation: 0x0
  Last successful step: any operation is complete.
  Total of Corruption detected: 0
  CBS manifest Corruption: 0
  CBS damaged metadata: 0
  Corruption shows CSI: 0
  Corruption of the CSI metadata: 0
  The Corruption of the CSI Payload: 0
  Total fixed Corruption: 0
  Repaired CBS manifest: 0
  Manifesto of CSI repaired: 0
  Repaired CSI payload: 0
  CSI store metadata refreshed: true

  3. the 'solution' next I'm focused on a system reserved partition. I came to the information Windows 7 uses 100 MB Sys. Reserved partition while Windows 8 uses 350 MB. I think I stumbled on information that it can be connected to the problems so modified the partition of provision (safely, in regards to the system reserved partitions and Windows 8) and increased the extra partition of 250 MB. This however proves to not be connected.

  4. some sources claimed that C:\Windows\SoftwareDistribution/download content may be the case. So after the Windows Update service has stopped I deleted the download content (I think on 1 try I deleted event pending.xml from WinSxS. Of course then I restarted the redownloaded updates of service, etc...

  5. I tried the update servers MS Windows Diagnostic.cab (just for the record, this tool renames pending.xml among others). This diagnosis is always problems no matter how many times I launch. It shows sometimes 2, sometimes 3 questions for example:

  

  Here are the main 'solutions' that I tried, but as you can guess, none of them worked. Just for the Windows registry has reported these problems viac Action Center:

  

  And I also found some information in WindowsUpdate.log:

  2015-08-02 01:27:28, error CSI 00000004@2015/8/1:23:27:28.681 (F) CMIADAPTER: failed. HRESULT = c004f01f [error facility = FACILITY_ITF, Code = 61471 (0xf01f)]
  Element:
  [163]""
  [gle = 0 x 80004005]
  2015-08-02 01:27:28, error CSI 00000005@2015/8/1:23:27:28.681 (F) CMIADAPTER: out with HRESULT = c004f01f code [error, facility = FACILITY_ITF, Code = 61471 (0xf01f)].
  [gle = 0 x 80004005]

  2015-08-02 01:27:28, error [0x01803c] CSI 000000db Failed (F) execution of the installation queue item: SppInstaller ({1b265fd2-721c-4e59-ad55-9d102a5d1d7f}) with HRESULT c004f01f [error facility = FACILITY_ITF, Code = 61471 (0xf01f)].  Failure will not be ignored: a restoration will begin after all operations in the queue of the installer; Setup is reliable (2) [gle = 0 x 80004005]

  Here, the infamous rollback is mentioned. I was not able to identify the exact update (or updated) what causes these cancellations so I hope it's something I could be helped with at least. The internet is full of KBs that this cause so I can't count on that, at least for now. I also want to note that I tried everything under boot. And also can not clean installation since I have no more join the MSDNAA where I had as a student activation key. I hope that I could upgrade to Windows 10 without him in the coming months, so that's why I concentrate on getting this environment to work and migrate to it in time.

  I'll be very grateful to anyone who can help me with this problem.

  In & out.

  John

  Given that no one could help you, I myself helped ^^.

  First of all, to all those who have problems with the fact that their updates install suddenly, you must change the settings for Windows Update. Change the option other than an automaticall installation (I used the automatic download, manual installation). In this way, you can install the updates in smaller batches. Personally, I installed updates to 5 or 10 (or almost). The updates that have been tens of MB, I installed only. What struck me most surprised, I could (at the time) to install all updates. In the case where you wouldn't you know at least certainly update you need to solve the problems.

  After all updates have been installed, I turned on the automatic download and installation.

  Concerning

  John

• Synchronization of a display multi-cam with no common point of sync (several clips that start before and after others)

  Hi all

  I recently recorded a production of theatre and because of some limitations of record on some camera, I've seen camera that is non-stop, and three others who cut inside and out for the big musical numbers or great moments, etc. Is it possible to create a view of multi-camera with multiple views, I, because none of them share a common point of synchronization? Is it possible to set multiple synchronization points and label all so that they can synchronize correctly? I'm sorry if it's very confusing! Thank you very much.

  Kyle

  multicamera Create Sequence of Source, with Sync Point, choose Audio

• When I download java comes up with error 25099 decompression of files has failed Please help

  WHEN I DOWNLOAD JAVA ERROR HAPPENS 25099 FILE DECOMPRESSION FAILED PLEASE HELP

  Hello

  You get this error message when you download java or installing it?

  Read the following article that may help you.
  Error: 25099 during Java installation
  http://www.Java.com/en/download/help/error_25099.XML

• Can not download the game, Grand Chase downloaded ACE fails with the error, the application has failed to start because nspr4.dll is not found

  I am trying to download the great chase game fails the low loader & I get this message... This application has failed to start because nspr4.dll wasn't found.re - installing the application may fix this problem... I have installed lotsa things to try & take... but have no idea what to do... my friend lent this PC... it worked great before that... but I guess that one of the idiots that we after it went out of this House missed something in place.. Please... How can I get that file back...

  Hello

  What was the changes made prior to this issue?

  I you suggest to put the computer in a clean boot state and then try to donload and see if it works.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I also suggest you to reinstall the program/game and check if that helps.

• iPhone 6s longer being updated to IOS9.3, music app won't work, unable to synchronize with itunes

  I can't open the music application, it crashes and jump when I try to pick a song.

  My playlist is not able to open. Select any which option it will hang and it closes.

  I'm unable to sync with itunes. It says sync session starts.

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

• Impossible to sync my ipad with itunes on my pc air

  I can't synchronize my ipad air ios 9.3.5 with iTunes on my work of Acer AspireE1-572 pc with Windows 10

  Thank you

  You use the latest version of iTunes? What happens when you synchronize?

  Get the latest version of iTunes - Apple Support

• 5 Gen iPod will not sync with itunes 12 in 10.11.2

  Hello

  I had a timing problem, where the my iPod Gen 5 has not been recognized under Yosemite anymore. Upgrade to El Capitan - all worked ok until the first OS / X update for 10.11. Now, iTunes 12.3.1.23 as the iPod is not recognized.

  I've tried resets and hard disk mode - nothing has worked.

  To work around this situation, I ended up installing iTunes on a virtual 10 Windows on the same Mac computer. 10 Windows VM detects the iPod correctly and I am able to sync after that I added all the music and books audio to iTunes for Windows library.

  But, I want to turn on my Mac and have the Mac with iTunes for Mac OS sync my iPod. He worked for many years without problems.

  So, I want to come back under Mac OS, re-formatting, and sync as usual.

  Anyone have any idea why the rMAc fo iTunes is not recognizing iPod, iTunes for Windows works?

  iPod classic, OS X El Capitan (10.11.2), iPod Gen 5

  Information module,

  the system log shows that these entries:

  10.12.15 15:32:38, 701 SystemUIServer [812]: try to set a time of iPods, if I don't have any client user.

  10.12.15 15:32:41, SystemUIServer 605 [812]: try to set a time of iPods, if I don't have any client user.

  Bus USB recognizes the iPod correctly and Parallels virtual machine also. The instance of iTunes in the Windows virtual machine recognizes everything is fine.

  Just iTunes 12.3.1.23 under native Mac OS / X 10.11.2 is not!

• cannot sync with itunes 12.2.5 10 iphone ios

  Hello

  I left the iOS 10 update happens on my iPhone 5.  I use an old 10.7.5 iMac to do all the backups of my iDevice.  Now, if I connect the phone to the iMac and click the button 'Trust The Computer' on the phone, iTunes 12.2.5 says "invalid response received from the device" and does not connect to it.

  10 iOS devices work is no longer with iTunes 12.2.5?  It's obviously the last version that will run on OSX 10.7.5.  So I will now upgrade my computer at home because I upgraded my phone software.

  What a pain in the *.

  NBB

  Hello

  I'm afraid you will have to upgrade your OS X to 10.9.5 or newer to allow you to use iTunes 12.5.1 that supports iOS 10.

  Jim