iPhone 6 alternating between the black screen and the Apple logo and nothing else

Similar Questions

• PowerMac G4 - Boats only for the Apple Logo. Nothing else.

  Hello

  So I have a PowerMac G4... Yes old enough. Well its been all this time working and I like it a lot.

  But today, it is consumed only until the Apple logo. and nothing else happens. Ive done some methods to try to get it working again. He acknowledged that the HARD drive is there and I can select. But that's about it.

  I should also mention that I have not the keyboard or the original mouse. I have the keyboard of Windows so :/

  Shutdown

  Disconnect all external devices

  start in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  If you did specify that in your "I did some methods' which is without assistance, unless you can specify that only those who were.

• When I try to boot my laptop it says prepare don't then it goes to black screen and nothing happens

  original title * Auto repair

  When I try to boot my laptop it says prepare don't then it goes to black screen and nothing happens. Before that, I got a message that some files are missing or that contains errors and it showed error 0xc0000185 and a \efi\microsoft\boot\bcd file.

  Hi Mark,

  Thank you for your response.

  According to your description, I understand that when you tried to install Windows from a support your computer freezes.

  I suggest boot you from the DVD and click on repair your computer and check if it helps.

  If the problem persists try the steps below.

  Method 1:

  Step 1: Access Mode safe mode with command prompt and run SFC

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore damaged files

  1. Go to safe mode with command prompt Mode.
  2. Now in the command prompt window, type sfc/scannow and press enter (Note: there is a space between sfc and/scannow).

  Step 2: If SFC help not try to run the disk check in the command prompt.

  Type the following command and press ENTER:

  CHKDSK /scan

  Important: All performing hard disk the disk check if bad sectors are found on the hard drive, while the bad sectors can be refunded, but there may be loss of data.

  Hope this information helps and let us know the State of the question, we will be happy to help you.

• White PSE 6 welcome screen and nothing else

  Started all of a sudden, no problem previously. Installed on an iMac running 10.5.8. Blank home screen and nothing else. Tried to reinstall... nothing works... help!

  What happens if you turn off your internet and then start PES 6?

  There has been a rash of posts in the forum on photoshop cs3 photoshop, do something similar, I wonder if it is related

  PES 6 is based on the cs3 code.

  If it's the same thing, then maybe it's screen recording your seeing (or do not see because it is empty)

  If you start PES 6 without internet on and the registration screen that you see, press never register and if I hope to solve the problem.

• iPhone 6 is switching between the apple logo screen and a rotation of wheel with a black background

  He won't let me do anything

  It acts like its deactivation with the wheel, then acts as its marketing with the apple logo screen

• IPhone 5 Asia showing the apple logo can be reset?

  I have an iPhone 5 s with a hardware problem. I can get into recovery mode and to connect to iTunes, restoring and updating seems to be the case, but the phone then uses the Apple logo when finished. It will not shut down.

  Any ideas?

  If your iPhone or iPad does not respond, try the steps here:

  https://support.Apple.com/en-us/HT201412

• 6 s IPhone is stuck on the apple logo

  I tried holding down the power button, but it still does not

  Try press and hold pressed the buttons home and power together for 30 seconds or until you see the Apple logo reappears.

• Satellite L300D-13s - black screen and nothing appears

  Hi, I have Toshiba Satellite L300D-13 s (pslc8e-02p013en).

  I turned off my laptop as usual and when trying to turn it back on yesterday, I have NO screen. I can here it whirring and all my lights are on, my battery is showing green (paying), but all I have is a black screen, no markers, imprecateurs, whatever it is?
  Have I somehow turned off the screen?

  I was in battery saving mode if it has nothing to do with it at all?

  PLEASE HELP - I DON'T KNOW WHAT TO TRY

  Thank you

  Hey,.

  Normally the battery saving mode (stand-by) has nothing to it. On my Satellite L300, it works correctly and I often use this mode.

  In any case, it would be interesting to know if you can see an image on an external monitor. The internal monitor FL inverter is may be defective and so it does not show an image... Who knows? ?:|

• MacBook (2010) starts with black screen with flashing Apple logo

  I recently got ahold of a Macbook Pro 2010 running very slow so I did a reinstall of the operating system (which was a living nightmare, Macintosh is not as easy to manage as it was at the time of PowerPC) once I got to the top and running, I decided to upgrade to the latest version of El Capitan (an update (not an upgrade I already had a version out there) once I rebooted and let the computer do its thing he began to start up normally, but after finishing the progress bar, he went to a black screen (with the screen still on) that flashed the boot from time to time Apple logo. I forced shut down the computer and start in safe mode with success (that's how I'm typing this post now).

  Thanks in advance.

  When you reinstalled, did you remove any third-party system before reinstalling.

  A Mac that runs in Mode without failure, but are generally not normally indicates some incompatible system changes.

  Software common problems are things that are intended to clean, protect, optimize, accelerate, or otherwise maintain your Mac.

• Turn the Inspiron 1721-black screen and nothing

  My Inspiron 1721 laptop stopped working. I turn it on - the fans start for a few seconds and it goes silent, then screen remains black.

  I left it on all night and turned it off and on again this morning and it came until I logged on windows, then went black again. It's like hibernation as the fans aren't on and his well silent when I stripped down the hard drive was still underway when I listened.

  Can someone tell me whats wrong?

  I tried the take the battery / power of maintaining 60 seconds put the wire back with battery etc thing tried external monitor, tried different ram etc, but nothing.

  Any suggestions?

  I had to replace the motherboard on my own. Looks like your's mine has done the same thing, I suggest to replace yourself if possible, or if you are unable to find someone who can, it is very easy to replace. Also you need a new dvd player, it looks like yours is not good. But that has never fixes your pc should be able to confirm if it is good or bad.

  I hope this helps

  You can find the motherboard online for about $150 and 20 for a DVD Rom drive

  Good luck

• Safari crashing my screen (and nothing else)

  I have Safari version 9.1 and it seems almost random, everything crashes. I noticed that the clock stops (I displaying the seconds), and any other Visual stops. However, I can always use the slider, and if there was no noise, it continues to play. In fact, if I click around 'blindly', I find that I can still do things, but I don't see what I'm doing, except when the cursor is and what it looks like to (sometimes it converts the finger pointer, for example).

  For example, once that it froze when I was playing a YouTube video. During the video, the audio continued. I found that when I click on the video portion of the YouTube window, audio paused and played as it normally would.

  Until recently, the only way that I found out it was hard closed. However, I recently discovered that if I tried to close "blindly" making an assumption on how to click on 'Stop' and push then Enter. I saw that before it completely stops (or before some unsaved app stop closing down), the display will return to normal.

  The problem edge for several weeks now every day 1-2, at least once a day. I can't find any factor correlation for each accident. It happens seemingly randomly.

  I know that the problem is with Safari because every time this happened, Safari was on (whether forward or back). In addition, when I used other browsers (such as Chrome or Firefox), the display did not freeze. I went back to Safari yesterday and it worked fine so far here, but as I used it this morning there was another accident.

  It's such a weird problem! Everything that happens?

  I posted some details of my problem to a previous debate, but that was before I had it identified as a problem in Safari. Display Macbook Pro gel randomly. Sounds and cursor still works.

  First on your mac - help looking for shortcuts - there should be shortcuts for freezes and shortcuts to sleep and stop.

  Gels date back at least to Snow leopard and have something to do with Spotlight/finder of indexation is not able to follow and cleaning disc for the Unix style.

  Have had safari freezes over the years and that had to do with the best sites - then edit all best sites you want not the top sites, bookmarks RSS seem to also update, even in the case of e-mail.  When I was using Safari didn't not top sites had been "fixed" to update until I edited the best sites - Apple has a default list - and add sites you use many - edition puts the site in a list of sites not top.

  Apparently the spotlight can rally on indexing (MD and MDworker jobs in Activity monitor) until you can get a memory leak.   After that happens if your startup is on a blue or gray screen, but you hear the reader do something - wait - when the office arrives - restart immediately - and if that gets a spinning wheel - restart once again - should be fast - so to ensure that see if you can go to a menu (I use the utilities) and open something (I opened the console) if that is your are good to go.

• Cannot update or restore Iphone 6 +. stuck on the apple logo or itune icon

  Hello

  I can't update iphone, the process is blocked when the firmware is updated (50% of the update/restore process)

  iTunes show me the error code (- 1).

  below the error log

  Thank you and best regards.

  [21:26:30.0783] bbupdater: collection of core dump disabled

  [21:26:30.0783] send_bbupdate_status: sending of baseband update host status

  [21:26:30.0783] update_baseband: call CFNotificationCenterRemoveEveryObserver

  update_baseband [21:26:30.0783]: error bbupdater: complete operation couldn\U2019t. (Error 47 BBUpdater - has no gatherPersonalizationParameters in the second step)

  [21:26:30.0783] update [Baseband] error - the operation couldn\U2019t ended. (Error 1004 RamrodErrorDomain - update_baseband: has no mark baseband info)

  [21:26:30.0783] [Baseband] update failed - 0 attempts remaining...

  [21:26:30.0783] 0: RamrodErrorDomain/3ec: update_baseband: has no mark baseband info

  [21:26:30.0783] 1: BBUpdater/2f: gatherPersonalizationParameters in the second stage failure

  [21:26:30.0783] cannot convert the wand error 1004

  [21:26:30.0783]

  [21:26:30.0783] = exit restore is completed.

  [21:26:30.0789] AMRAuthInstallDeletePersonalizedBundle

  [21:26:30.0872] : restore failed (result = - 1)

  [21:26:30.0873] restore completes, status:-1

  [21:26:30.0873] failure Description:

  [21:26:30.0873] depth: 0 error: AMRestorePerformRestoreModeRestoreWithError failed with the error:-1

  [21:26:30.0873] depth: 1 error: the operation could not be completed. (AMRestoreErrorDomain-1 error - failed to handle the kind of message StatusMsg)

  [21:26:30.0873] error in depth: 2: the operation could not be completed. (AMRestoreErrorDomain-1 error - failed to update the firmware of the device)

  [21:26:30.0873] error in depth: 3: the operation could not be completed. (Error-AMRestoreErrorDomain 1 - wand firmware update failed)

  [21:26:30.0873] error in depth: 4: the operation could not be completed. (Error 1004 RamrodErrorDomain - update_baseband: has no mark baseband info)

  [21:26:30.0873] depth: 5 error: the operation could not be completed. (Error 47 BBUpdater - has no gatherPersonalizationParameters in the second step)

  Click/click on the "1" in the first row of the first table > help with iOS update and restore errors - Apple Support ""

• Black screen and cursor only

  I have Vista Ultimate and after BIOS boot I get the black screen and nothing else. I can get into CMOS with little or no problem, but not everything can go further. Any terminology suggestions to solve this problem?

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Boots Vista black screen with white cursor and nothing else (Black Screen of Death)

  After a download from Microsoft update last week, my system has rebooted. He first had a screen blue error, rebooted, reported a disk error and automatically run CHKDSK. Since then, the system has started a black with white slider screen and nothing else. This happens at startup options (Normal, safe, safe with the last command good known configuration). Not even sticky keys would come to the top. CTRL-Alt-Delete, Ctrl-Alt-Esc and all other keys has nothing did. Even with a right click.

  I searched all over the web for solutions. I found (and tried) several over the past week, but nothing has worked.

  Here's what I tried...

  F8 held key on boot to the top and entered the startup recovery. Ran of recovery. Initially so found of disk errors. Those fixed. Then he said he could not repair the system and reported two pilot errors.

  Tried system restore. He said that I had no restore points (even if I know that I had before).

  With the help of recovery options, I went to the command prompt. Asked to RegEdit and load the Software hive. Checked the connection entry Windows NT; made sure, it has been set to explorer.exe

  The system, checked RpcSs Key hive. Already the NT AUTHORITY\NetworkService value

  Renamed event connects winevt and not create the Logs folder

  Removed the hard drive. Attached to another system (as slaves), and the registered file permissions. They have screwed everything up. The fixed file permissions and drive put back in original system.

  Œuvres self-retaining keys now. Do not, however, as my sticky keys doesn't have a link to configuration.

  Went back into recovery startup via the F8 key at startup. Now, when I run start recovery, it says that everything is going well and there is no problem.

  I have download the hotfix from article 977675 Microsoft, but I don't know how I can apply it without being able to get into windows. I would like to contact MS e-mail or chat support, but I can't get the product ID without being able to connect (frustrating talk).

  I would like to reinstall OS, but HP does not provide an installation disc with their systems (only a full restore partition). My system is backed up (with the exception of the Windows folder), but I really don't want to have to make a full recovery, as I have a lot of specialized programs and settings that would probably take me a week to re - install and re - set.

  Anyone have any new ideas?

  Hello

  Here's my usual BlackScreen convenience store, because it may be that you haven't tried
  or if you have access you might be able to come back and start some of them.

  ----------------------------------------------------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Dropped my iphone 6 in water, just the apple logo appears

  I dropped my iphone in the water two days back... I tried to turn off immediately, things would turn itself after a few seconds... I let it run out of battery, and finally he was out... I let it dry... Tried to remove the water forms all grooves... It's been 2 days now... I plugged it to load but it is now stuck on the apple logo. Nothing happens... For awhile, there was a red screen of death (I looked at the name) but now it's just the apple logo. This means - my phone is dead and needs a replacement? Any idea what I should do next?

  Shri.Chavda wrote:

  This means - my phone is dead and needs a replacement? Any idea what I should do next?

  That's right - you need to bring it to an Apple store or Service Center for repair for a replacement (the cost depends on what type of insurance you have and where you are - I mean what country) allowed