iPhone 6 more issues activation and network on the latest iOS 9.3.2

Similar Questions

• iPhone 7 more stuck on black screen with the spinning wheel

  How can I fix it? I tried to reset, go into DFU mode, recover from iTunes. Nothing works. I can't use iTunes because he wants me to grant access from my iPhone is not responding. DFU mode doesn't work, the screen does not any combination of seconds I hold down the buttons to. This has happened more than an hour. Should I just wait for the battery to die? Please note that I do not live in the United States or the U.K. or anywhere with an Apple Store, I can take it to.

  Thank you

  Hello! I think that I may have a solution to our problem of the black screen with the circle of rotation.

  I came across this post today because my iPhone all nine 7 (which I've upgraded to the latest ios) also got stuck on a black screen with the circle of rotation. I tried to update some of my apps, when suddenly the screen froze. I clicked once on the home button and the screen become black with the subsequent appearance of the circle of rotation.

  I have tried everything - simultaneously press the home button and power (does not work). connected to itunes to do a restore (it won't let me not because my "find my iPhone" was turned on - but I could not turn off because my phone was insensitive).

  In any case, a very useful Mr. Damon (Senior Advisor to Apple) helped me via chat to solve the problem.

  Here's what I did:

  1. make sure that your iPhone is disconnected from the socket or the computer.

  2. hold the POWER button and the VOLUME DOWN button at the same TIME. If it works, the screen should turn off almost immediately.

  3. connect your iPhone to the computer. (when I have connected to the computer, my iPhone automatically on and was ready to be reused).

  The steps below are for those whose iPhones did not turn with the above steps. The following steps are designed to allow you to disable remote your 'find my iPhone', so you can do a manual restore from iTunes.

  4. go to www.icloud.com.

  5. click on Find iPhone

  6. given that the phone is turned off already, he won't be able to find it. On the top bar, click DEVICES.

  7. click on your iPhone.

  8. click on "delete account".

  9. go into your itunes and do a restore.

  I did have to do steps 4 to 9 more, because as I said, my iPhone automatically activated after step 3.

  This really worked for me. I hope this works for everyone else too! Have a great day!

• Size buttons menu custom for active and roll over the State

  Hello.

  I'm looking to create a navigation menu (simple rectangles with text) in which the role active and several indicate the box will be larger in height.

  I wish well for on roll over the button to magnify and others to shrink, then for there great when selected.

  In the example below, this is what I want it to look for the apps page.

  I'm stuck as the menu widget only allows them to be on only one size. Any ideas how I can achieve this?

  Kind regards

  Sean

  

  Post edited by: Sean Bird

  You can add effects to an active state on the menu which items when in active State will show different from the menu SUP normal items.

  Thank you

  Sanjit

• Activation and Passivation of the OFA

  I'm just curious to know what is the activation and Passivation of the OFA. These things are not very clear in the developer's guide.
  
  Thank you

  Passivation is the process of saving the State of the application to a secondary support (the database) at the points of specific event so it can be restored (enabled) when necessary. This restoration of data is called Activation. Passivation of the OFA is done implicitly when the appropriate profile options are enabled.

  OA Framework currently provides the following State management functions:

  Scalable applications - when the consumption of resources is high, rather than create a new instance of the resource dedicated to each new server thread, OA Framework saves the State of the application of idle threads and retrieves their resources for use by others. When the idle user thread wakes, the saved application state is restored. In short, memory is recovered for JDBC connections, application modules and user sessions without affecting the user experience.

  Session timeout recovery - Servlet session can expire without forcing the user to restart an incomplete transaction. In the future, this functionality will be extended to support failover of the intermediate layer.

  Its often recommended for the product team to ensure that their application is certified passivation.

  All these information are available in the OA Framework Developer's Guide.

  Kind regards
  Guru.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• An iPhone 4S should upgrade to the latest iOS version 9?

  Hello

  One of my friends still has his iPhone 4S with iOS 8.3. She is fairly clean sound with very few applications. She mainly uses the app facebook facebook messenger and whatsapp. Lately she has experienced some app crashes. Especially with facebook and facebook messenger, sometimes she's their use and the apps just close. The phone returns to the home page.

  Is there something that can be done to solve this problem? Has anyone tried the latest iOS update? Does that help? The 4 handles well the latest OS?

  I apologize in advance if this has already been answered elsewhere. I tried looking for the answer and I couldn't find one.

  Thanks for any help anyone could provide.

  Best regards

  Yes you can, I have an iphone 4 with ios 9.3.5 s

  I hope that resolves your issue.

• Currently have XP Home Edition 2002 Pack 3 and upgrade to the latest version free. How do I do that?

  Upgrade XP 2002 to more current system

  Currently have XP Home Edition 2002 Pack 3 and upgrade to the latest version free. How do I do that?

  Currently have XP Home Edition 2002 Pack 3 and upgrade to the latest version free. How do I do that?

  Last free version of what?

  If you're talking about Windows, it has never been free.

• cannot open and ask for the latest version.

  try to open a pdf file, but it requires upgrading to the latest version.

  I have check for update and it shows the latest version

  It's actually the first time I've seen this message. I saw several people who have said that they are opened in Acrobat or Reader - even asked to check - and only a screenshot has finally confirmed that they were not similar symptoms. Sorry to doubt, but this has been universal.

  So, in this case, I think that we can simply believe the message. Your version of Acrobat is very old. I don't know what are the characteristics in a file PDF can give this message.

• Tutorials refer to a shape tool and the rectangle tool. My cc of photoshop doesn't have these tools, and I have the latest version. Help please.

  Tutorials refer to a shape tool and the rectangle tool. My cc of photoshop doesn't have these tools, and I have the latest version. Help please. My toolbar is missing for these elements. I'm learning through tutorials and something is not up-to-date.

  Does that help?

  

• How do I change my Lightroom and Photoshop to the latest version?

  How to change my Lightroom and Photoshop for the latest versions?

  Hi Centerwall,

  This is a user to help rather than chat forum. Information on how to get Chat support can be found here: FAQ: how to contact Adobe for support?

  Please see the information here which explains how to upgrade applications Cloud Creative: FAQ: how to upgrade Creative Cloud applications?

• Files created with Illustrator CS2 12.0.0 version will be compatible and works with the latest version of Illustrator.  The files are registered as *.ai------.

  I have an older version of Illustrator and you want to upgrade.  My question is: files created with Illustrator CS2 12.0.0 version will be compatible and works with the latest version of Illustrator.  The files are recorded as * .ai?

  That should be no problem.

  Text will be redistributed without doubt if you want to change it.

• iPhone 6 more issues of button "home" and turn off the questions

  I have two separate issues with my iPhone 6 more

  9.3.2 software (updated to try to solve this problem - question began before the software upgrade)

  My iPhone only more 6 works randomly.  I'm still able to make calls and use the phone, but the phone is constantly interrupted by these two questions.

  "Slide to turn off" or button 'Cancel' at the bottom

  (1) the phone asks me to "Slide to Power Off" - at the top of the button slide phone - with a cancel downstairs.  Slide and turn it back on does NOT resolve this problem.

  "Home" button is to take a screenshot of my current screen randomly.

  (2) when you press the button of my house, he takes a picture of my current screen instead of Act works as a home screen button.  This can happen 1 time or 10 times in a row before the home button functions correctly.

  Here is a screenshot of the camera to illustrate various photos taken.

  

  I did all the updates

  I did tap hard downs

  I backed up my phone and tried to reset to factory settings

  These are the questions randomly but are very common - a question of these two issues with caused during the use of the phone to navigate or "Slide to power off" appears randomly if the phone is not in use.

  Please help with any suggestions!

  Your sleep/wake button is pressed somehow. You have a form any case suitable for your phone that covers this button? If not, the sensor that presses the Sleep/Wake button against is missed ignition. As you even tried a factory restore, it may be clear that the problem occurs because of a case that is pressing the button somehow or the switch has gone bad.

• iPhone 6 more screen flashing and does not

  Hello

  For the last few days, my iphone 6 more screen starts flashing from the top and the touch screen doesn't respond. The phone is still under warranty.

  I went to apply here authorized service center in Singapore, they have looked at my phone and said, there is a slight inclination in the phone which will be considered physical damage where it can not be repaired / replaced under warranty, I have to bear the cost.

  Now, as I read on the forums, this is a problem of very well known with the iPhone 6 Plus, also, I don't see no noticeable turn in the phone of my eyes. I'm sure that this issue is not because of any physical damage, but as a result of an internal manufacturing.

  I'm really disappointed with the service of Apple. I don't know what to do now. Should I try to go to any other authorized service center and see what they say?

  Any advice would be appreciated,

  Thank you

  Rohit

  I started having the same problem with my Plus 6. I took it to the Apple store today and the tech told me that it is a known issue that they see a lot. They hope that Apple will issue a recall notice. My phone is out of warranty, so they would be out swap with a unit refurbished for $329. The real kicker is that he said that they have the same problem with a lot of devices refurbished right out of the box. My options are to keep a phone that keeps flashing and does not or pay $329 for a replacement who may have the same problem that has my current phone. It's really bad assumption of a product!

• I forgot the password on iphone 6 more on icloud and find that my iphone is

  Hello

  I have IPhone 6 more that I gave to my father is open a new user on Icloud is not remember the password "find my Iphone is on" Iphone is disabled.

  What to do is locked. ?

  Thank you

  Oren

  OS: 9.1

  IPhone 16G

  https://support.Apple.com/HT201487

• Homegroup and network cut the connection. Internet connection remains constant.

  I posted here once before and thought that I fixed it so I told everyone that it was fixed.  Of course I spoke too soon.  I have a very annoying problem with my laptop Win 7 and Win 7 office not being able to keep a home group or a network connection between them.  First of the installation program.  Both computers are Win 7 Home Premium.  The laptop is a HP and the office is a home built computer.  My router is a Belkin N + F5D8235-4 V2000.  So far, I tried to isolate the problem without success.  The Office has a G by US Robotics Wireless card.  I tried to download the latest firmware on their site, but it says that Windows will take care of all upgrades.   I thought that maybe that was the problem, so I uninstalled and put a new mark with the same results.  Updated firmware to update on the router and the laptop HP as well.  I use Windows with Microsoft Security Essentials firewall.  Any time I you change something it will work for about 10-15 minutes and die again.  Changes, I mean disable the firewall to change wireless channel, other random settings on the router.  But like I said that even leaving changes for awhile he still falls to the loss of the connection.  This is why I think I can exclude the firewall.  Tonight, I noticed that even if the two computers are online, nor shown on my routers DHCP client list.  I disabled DHCP on the router and the connection worked great for a while but my cell phone could not recover on the wi - fi network so I changed it back.  When I turned the DHCP on both computers customers showed up on top of the list.  It was like that in the last 20 minutes and my I am still able to access the network and the home group.  However, does anyone else have any other ideas? I am about to but a different router and see if it may be the problem.  I hope you understand what I mean.  Please let me know if you need more information.

  Hello

  The command IPconfig shows a configuration valid card wireless with IPv4 and IPv6.

  If the second computer has similar result and the homegroup is set up correctly. It should work.

  You keep talking on the network? Provided that you explained to the homegroup is now your network.

  I can't relate to the list of devices of Belkin, if both computers are getting a valid IP address, then this is the problem in the router.

  The following links have info on the repair of IPv6 (if necessary) and the residential group.

  --------------------------

  How enable or disable and fix the components of IPv6 - http://support.microsoft.com/kb/929852

  General help in homegroup.

  Group home-networking-the-easy-way - http://windows.microsoft.com/en-us/windows7/help/home-sweet-homegroup-networking-the-easy-way

  Group residential-recommended-links - http://windows.microsoft.com/en-US/windows7/HomeGroup-recommended-links

  Homegroup - frequently asked questions - http://windows.microsoft.com/en-US/windows7/HomeGroup-frequently-asked-questions

  Why can't I create a homegroup? - http://windows.microsoft.com/en-US/windows7/Why-cant-I-create-a-homegroup

  -----------------------

  The file-sharing issues.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET