iPhone 6 more screen flashing and does not


For the last few days, my iphone 6 more screen starts flashing from the top and the touch screen doesn't respond. The phone is still under warranty.

I went to apply here authorized service center in Singapore, they have looked at my phone and said, there is a slight inclination in the phone which will be considered physical damage where it can not be repaired / replaced under warranty, I have to bear the cost.

Now, as I read on the forums, this is a problem of very well known with the iPhone 6 Plus, also, I don't see no noticeable turn in the phone of my eyes. I'm sure that this issue is not because of any physical damage, but as a result of an internal manufacturing.

I'm really disappointed with the service of Apple. I don't know what to do now. Should I try to go to any other authorized service center and see what they say?

Any advice would be appreciated,

Thank you


I started having the same problem with my Plus 6. I took it to the Apple store today and the tech told me that it is a known issue that they see a lot. They hope that Apple will issue a recall notice. My phone is out of warranty, so they would be out swap with a unit refurbished for $329. The real kicker is that he said that they have the same problem with a lot of devices refurbished right out of the box. My options are to keep a phone that keeps flashing and does not or pay $329 for a replacement who may have the same problem that has my current phone. It's really bad assumption of a product!

Tags: iPhone

Similar Questions

  • IPhone 6 more screen my husband does not go black after use

    After he uses his 6 Iphone and plug it on the charger the screen stays on and is not black. How can I fix it?

    Check the settings > General > self-locking > see the time it is worth.  You can also click the sleep/wake button, get help with buttons and switches on your iPhone, iPad or iPod touch - Apple Support.


  • How to lock my iPhone 6's screen so it does not move between portrait and landscape?

    How to lock my iPhone 6's screen so it does not move between portrait and landscape?

    Select portrait orientation lock.

    Swipe the top of your home screen to access the control center and select the icon with a lock and an arc around him.

  • I can't open links as the screen flashes but does not allow a new intake open. It was very iffy for several weeks, but it happens more and more.

    It started several weeks ago, but now the frequency has increased to where I can't open a link in a new take. The screen flashes, but nothing happens. I've tried Google Chrome, and this problem does not occur in another browser, so I guess this isn't my CPU, or security software. I use Avast and Malware Malbytes. I won't change to Firefox! Help!

    You must do a little more troubleshooting to determine the cause; as explained in this section of this safe mode support page.


    The problem does not occur in Mode safe

    If the problem does not occur in Mode without fail, it is likely due to an acceleration of the extension, theme or material.

    See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems for solutions.

  • Confirming that vsphere 6 requires flash and does not support a customer to RHEL6/firefox?


    My reading leads me to conclude that vsphere 6

    1. always requires flash

    2. can't access customer to RHEL6, either native one or through firefox

    Is this right?

    Thank you

    Hi mips,

    Yes, 'officially' the vSphere Web Client 6.0 does not support the RHEL6 and requires flash to operate. However the following may be of interest (even if it is for 5.5): KB VMware: cannot open the vSphere 5.5 Web Client in a browser on a Linux-based desktop

  • LaskerJet HP 1022: Having problems printing. Seeing flashes and does not turn off.

    I have problems printing.  I turned the printer on / off power several times to cancel the print job.  There is a red light flashing and I am unable to stop after pressing several buttons.  I apologize because I don't have a book.

    Here is your complete support page.


    Download your User Guide and read.  Here he also troubleshooting for you.  Good luck.

  • Clicking on menus in Muse causes screen to flicker, does not allow access

    Updated to 2014 Muse, running Windows 8.1

    By clicking on the part of the menu text font, the screen flashes and does not allow me to change the font.

    In addition, after you create a rectangle and you attempt to add a hyperlink, click the hyperlink box, causes the screen doesn't Flash and does not allow access to the text box.  A lot of similar problems and Muse is now unusable.  No other problems with far adobe products (Photoshop works very well)

    The menus seem not to be the right size because I can't see all the text in their breast.  It's like they're waiting for my monitor at a higher resolution, (change the resolution does not help)

    I tried to uninstall and reinstall.  I removed the previous version completely.  I rebooted several times.

    Help!  (Please)

    Thank you all.


    Go to control panel of configuration and the value Display zoom 100% or 150%. The release of 2014 of Muse is not compatible with how Windows 8 and 8.1 reach 125% zoom.

  • Have two black stripes on the right and left of the screen making it my screen more small and does not know how to remove them permanently.

    Problem with the screen!  Have two black stripes on the right and left of the screen making it my screen more small and does not know how to remove them permanently.  Can someone help, please step by step details.  Thank you.  Have Windows7!

    Original title: screen

    Looks like a monitor / setting screen. Horizontal and vertical positions may need to be adjusted in the monitor buttons. Another possibility is that the display resolution is not optimal.

  • iPhone 7 more - Siri iOS10 not work and does not

    I received my iPhone 7 Plus 3 days ago and tried to set up "Hey Siri". In the process, I noticed that Siri was insensitive and does not work.

    I did some troubleshooting and started with the reset, restore, turned dictation & Siri/off voltage (before and after reboot) and still no response from Siri.

    I proceeded to remove the hardware problem by making a call and speaking directly into the microphone with high and low height during a call. Nobody who assists heard both high and low perfectly. I only tested the microphone with voice memo and the microphone worked fine.

    Called customer service on speaker (which call was working properly) but they were unable to provide a response, rep said she would follow with me Wednesday.

    I press the home button, Siri will appear with the wavelength and as soon as I said a word Siri States "I didn't understand" and rest wavelength normal. I don't know if there is a problem with my phone or iOS10, but if someone has an answer or has the same issue please chime. Thank you!

    iOS 10, when using Siri, you hold DOWN the home button while talking with Siri.  Release the button when you are finished speaking.



  • my computer told me to repair windows.and everytime I try I get a blue screen. It does not start in any mode without failure. I just get a blue screen. Thany you shane

    whenever I try to start my computer .a blue screen come often does not start in any of the modes security .He told me to repair windows recommended. can't do recovery or what he can be.wont start in safety mode.what can I do .thank you. Leonard.

    Hi leonardhurley,

    Since when are you facing this problem?

    You did changes before this problem occurs?

    What is the exact blue screen error message you received?

    Method 1

    I suggest that you perform the last good known Configuration


    Method 2: disable automatic reboot in order to collect the Blue error screen, so in case the blue screen just flashes and dries on.

    Method 3:

    I suggest you to follow the article below for the Blue error screen.


  • buy an iphone 5s by amazon and I came with iCloud blocked an account... {I called the seller and does not that I do that I'm from Venezuela please need your help}

    buy an iphone 5s by amazon and I came with iCloud blocked an account... I called the seller and does not that I do that I'm from Venezuela please need your help

    No one here can help you. The device is locked activation. Since you have made the purchase by Amazon, you can check with them to see if they will stand behind it. No one on the forum, or Apple can help you remove the lock. Only the previous owner can do this. I suggest that you demand a refund, so let's start a claim with Amazon about this dealer.

  • Vista gives the message "there is no more available end point" and does not allow me to share a folder on an external drive. Can you help me?

    Vista gives the message "there is no more available end point" and does not allow me to share a folder on an external drive.  Can you help me?


    Thanks for posting in the Microsoft Community.

    I don't know it must be frustrating!

    Let us try these steps and see if that fixes the problem:

    (a) press Windows + R keys to open search Run

    (b) type regedit , and then click ok

    go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

    c) on the right, click it, click permissions

    (d) click on ADD and type everyone and click ok

    (e) now click on all

    (f) below, you have permissions for users, select full control and click ok

    g keys) press Windows + R to open Run Search

    (h) type services.msc , and then click ok

    (i) double-click base filtering engine service.

    (j) Make sure that the service status is started and the startup type is automatic

    (k) the procedure for the windows firewall service

    (l) click on apply and Ok.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information:

    Back up the registry:


    Hope the helps of information. We know if you need help. We will be happy to help you.

  • Screen turns black and does not return. One stop forced

    When I leave my computer for a while, the screen turns black and does not return when I press 'enter', or any other key.  I do a forced shutdown (turn off with the power button).  Can I get, and the "incorrect closing" message when I turn on computer. I think that it is a problem of Hibernate.  Any ideas?.

    Original title: hibernation problem?

    What happens if you press Ctrl + SHIFT + ESC when you want to get out of hibernation?

    You use a wireless keyboard and mouse with a transponder. What happens if you press the button on the transponder?

  • Windows Vista Basic - display, icon & text animated look and does not fit screen

    original title: Windows Vista Basic

    After a recent update of my screen, icons, text and little else seems animated and does not have the screen on my laptop. Advice please? I tried to change my screen resolution, but it will only go all the way to the left or all the way to the right.


    There are a number of things to try:

    try going to your graphic card manufacturers site or computer and are looking for the driver download section

    Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

    then try to make the screen of solution of problems


    Change the screen resolution


    or try a restore of the system before this happened


    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.


    and change how to get updates for you to choose what you install to stop it happening again

    You may need to install one at a time to find the problem, we

    Make sure that you do not use Windows Update to install the drivers of 3rd material part

    Find them directly in the hardware manufacturer

    and when you see the problem update right click on it - UAC prompt - then hide it


    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  • part of the screen lack sound as if all type of himself downplayed a little and does not use the entire screen

    I have a dell studio with vista, I shot it today and the far right 1/4 of my screen has disappeared, its like everything kind of himself downplayed a little and does not use the entire screen. I didn't change anything or add programs. someone has an idea?

    Hi musicwatkins

    Did you the latest changes on the computer?

    You can check if changing the resolution of the screen helps you solve the problem. See below for links-




    You can also check if the setting parameters of monitor, referring to the manual of the monitor will help you.


    I hope this helps.

Maybe you are looking for