iPhone 6 stops with remaining capacity, battery quickly drains

I have an iPhone 6 running iOS 9.2.1 (he was running 9.2 and upgraded again to see if he'll fix it - I am registered for iOS beta test). I can load it at 100%, but the battery quickly led, often going from 100% to 80% more than 20 minutes of use with the brightness set to 50%. The remaining battery life fall randomly 65% to 40% (for example) or will simply die. He will often fall to 1% and after plugging back, immediately shows that there is 60% (or any random number) left. I made a backup, wipe the device and restored with the same results. Is it year iOS issue, corruption of the app, battery twisted?

Any suggestions are appreciated.

On the despair (impossible to find all the answers in this forum and others) and not wanting to drop hundreds on a new phone or have my battery replaced only to find out later that my iOS or some app is corrupting my iPhone, I saved my photos and did a hard reset on my device. I installed a few applications, one of those who are Netflix, so I could test the longevity of the battery without having to interact actively with it.

The verdict? I watched 2 hours of Netflix on wi - fi with the brightness to 75%, sometimes checked my phone (while ensuring close any app I used), and I was able to get a good 6 and a half (almost 7) hours out of it. This is a HUGE improvement over what I was experiencing, but I can tell the last 30% of my battery drained rather quickly and show bizarre behavior, from 31% to 29% and then after a few minutes of use to 2%, which continued with the flashlight on and shopping on Amazon for a good 10 minutes until it dies completely. Once I plugged it in, he came to 8% immediately and is now sitting on the charger for the price of one night.

Don't know if this helps or confuses the * out of anybody... but I'll take the improvement so far. I hope that maybe he can get this information to the right person and maybe they can offer additional advice. It's certainly a pain the * to wipe a phone from scratch... but it was that or get a new phone. I hope that someone out there has a solution or has more information to add. Ask me any questions you need. I'll try my best to answer. BTW... This was not mentioned in the post above, but I test several Chargers and cables (not that I think this is important because the battery drain is erratic and not the perception of speed).

Tags: iPhone

Similar Questions

  • 9.3.2 IOS on iPhone 4S battery quickly draining

    Hello

    I've just updated to iOS later and it seems to drain the battery pretty easily. It's roughly ~6%/hr just sitting there, no use, no apps open, etc.. Before the update, it was like 1%/hr, not even that I think.

    Before hitting submit and asking what gives, I just searched online and found this: http://www.vinereport.com/article/ios-9-3-2-updates-apple-admits-problems-promis're-to-fix-them/11039.htm

    .. who mentions iPad 9.7 pro and everything else is fine, so with a little luck, someone sees this, too =)

    Have you ever tried to force restart the phone after the update, with the button sleep and hoe for about 10 seconds, until what the Apple logo come back again?

    You lose no data by doing this.

    Next step after that could be put back to the factory settings and restore form the last backup, especially if you updated using the option 'Over the Air '.

    Use iTunes to restore your device to factory settings - Support Apple iOS

  • iPhone charging stops with view 4.5

    Hi all

    We have just updated our infrastructure view 4.5 and that includes Agents of the view.

    We have equipment PCoIP some Wyse P20 and Samsung NC240. Before the 4.5 upgrade iPhones may be charged by these devices. Now, they can't.

    Interestingly, the work of loading when the screen is turned on and seized are connected to an Agent from the view. As soon as a connection is established with a desktop computer that is no longer for the iphone can be charged.

    I tried to use PCoIP FW 3.1.2 and 3.2.0. The result is the same.

    He worked with view 4.0.1.

    Anyone saw similar?

    Rob of TIA.

    Excellent question.   I was sure that I had tested this during my evaluation of PCoIP and work load.  But then after we got it installed (and has since upgraded to 4.5), it didn't work anymore and I was wondering if it never worked or I just imagined it. But your post says it's true.

    It seems that both the view is not in the control that it works, so I know it had something to do with a view.  In the log file in:

    c:\Program Data\VMware\VDM\pcoip_server*.txt (location of Win 7)

    I found this, after you have connected the phone:

    15/12/2010, 16:15:40.984 > LVL:2 RC: SOFT_USB 0: VID:0x05ac, PID:0 x 1294, connected
    15/12/2010, 16:15:40.984 > LVL:2 RC: SOFT_USB 0: 1 desc_len 57 device_id softusb_plugin_device
    ....
    15/12/2010, 16:15:40.984 > LVL:2 RC: 0 SOFT_USB: softusb_plugin_device: VID_05AC & PID_1294 block (1 addr)

    I recognized this as the id of the seller of my iPhone I just watched it in the device list of the PCoIP hardware news.  So, that tells me that it was to be

    actively blocked.

    I searched the registry and found:

    HKLM\SOFTWARE\VMware, Inc. \VMware VDM\USB\HardwareIDFilers.

    Here is the complete list of blocked devices (apparently the default list).

    VID_0FCA & PID_8004 # RIM / Blackberry
    VID_08F0 & PID_0005 # Corex Tehcnologies /?
    VID_05AC & PID_1293 # Apple / iPod Touch 2. Gen
    VID_046D & PID_08AF # Logitech / Quickcam Easy/Cool
    VID_04a9 & PID_1736 # Canon?
    VID_04a9 & PID_1737 # Canon?
    VID_04a9 & PID_1741 # Canon?
    VID_03F0 & PID_2A12 # HP / some printer model
    VID_05AC & PID_129A # Apple / iPad
    VID_05AC & PID_1294 # Apple / iPhone 3GS
    VID_05AC & PID_1290 # Apple / iPhone

    I looked at the codes provider and device. The # and the following are not part of the parameters.

    I don't know why these particular devices are listed.  Some, like the Blackberry, are wide enough, and others refer only to specific devices.   Its likely that some of these devices either do not work, or more likely to cause some sort of problem or accident.  Reference is made to this registry key in the following KB: http://kb.vmware.com/kb/1011600 but not really a full explanation.

    In any case, I took one for the iPhone 3GS and after registration on and connect to a new session, I have the charging symbol on my new iPhone!

    Use with caution because I do not know there is a good reason for some of these devices being on the list.

    Hope this helps someone.

    P.S. This does not mean that sync and other feature (haven't tested).  This simply means that you can load.

  • Computer stops with a blue screen with error fatal when the iPhone is connected

    I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

    First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

    My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

    I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

    Thank you.

    Hi 1980ckc,

    1. have you tried to connect the iPhone to a different USB port?

    You can check out the apple support link and check if it hleps:

    iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

    http://support.Apple.com/kb/TS1502

    Also check out the apple discussion link:

    http://discussions.Apple.com/message.jspa?MessageID=10339681

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • iPhone 6 - video record stopped with 5 GB of storage left

    Our iPhone 6 stop video recording with a message claiming that there is insufficient to continue storage, but the graphic bar at the bottom of the iTunes window shows that there are more than 5 GB of free space.

    Why?  How to avoid?  We must break long claws in pieces by stopping and restarting before a deadline?

    What is your storage space available for example on the phone under settings > storage and use iCloud?

  • Satellite P300-1d(a) - battery with a capacity more

    The standard battery on my Satelite P300-1d(a) gives me 1.5 hours working time.

    Works to batteries with lager capacity exsist?

    Hi mate,

    You can check yourself on the Toshiba site, where you can search for compatible accessories. Here you can find:
    http://EU.computers.Toshiba-Europe.com > Services devices & -online Options & accessories from PC-online PC Options & Accessories Home Page

    For example the PA3537U-1BRS battery is a 9cell battery compatible with Satellite P300. You can order from an authorized service provider. :)

  • Signal low iPhone in the use of the battery (6 apps with weak signal)

    Hello world

    I bought a second hand Iphone, it works fine but the battery runs out quickly when I use it (especially on safari). In the use of the battery, I see always weak signal under the apps and always under phone, even though I have 4/5 bar. I have yet found a solution...

    https://drive.Google.com/file/d/0B0aW-K-0VfulQW1LVVJCVHc0OW8/view?USP=sharing (here's a screenshot)

    Thank you in advance, I hope that your answers will help me.

    Hi luca9903,

    I see you are a new user here in the Apple Support communities - welcome! I hope we find you often contributing in the future.

    If you have short battery life when you are using your iPhone, you can use the information on this page to help extend - Batteries - maximize Performance - Apple

    Thank you for using communities of Apple Support.

    Sincerely.

  • iPhone battery 6 draining on the home screen and locking

    I've read other posts on the drain of the battery on the iphone but that you did not find an answer that reflects my situation.

    Relates to the iphone 6, ios 9.3.1 64 GB,.

    I took my phone this morning and pressed the home button to check the remaining capacity before getting ready for the day.  It is 79%.

    I ask without opening any application or even unlock.  As usual, the screen goes black after a few seconds.  I go back an hour and a half later, and now it's 23%.  So I check the battery use it it shows as home and lock screen used 97% of the power of the battery since my last load.

    Why the drain?  It doesn't drain as quickly when I watch a video and it was just the home button to check the remaining power.

    The percentage shown is not since the last charge. It's usage in the last 24 hours. It could have been 5 counts at the moment.

  • Camera front iphone 6a stopped working

    My front camera of my Iphone 6 stopped working yesterday. When I pressed the button "rotate camera", the screen freezes a few seconds, the last image of the rear camera remains and is the screen is black or the screen returns to the camera back. I can either use facetime, the other sees me and I do not see too.  I tried to reset. Does not work for some pictures. When you closed the app and reopened later, will not work. I had to reboot again. I got my iphone on August 17 and worked well on facetime and selfies.

    What is the solution?

    If the reset of the force has not worked, set it back to factory settings, without using the last backup. Test the phone. If it works, restore the backup. In case the problem comes back after the use of the backup, your data backup has been corrupted and cannot be used.

    Use iTunes to restore your device to factory settings - Support Apple iOS

    3. If the factory reset does not help, you will need to get the phone checked by Apple.

    Launch a service request

    Find an Apple authorized service provider

    Make an appointment at the Apple Store

  • E530 can't help with windows 7, battery and unable to get out of sleep

    I just bought the above and I find that it does not completely stop with the Windows shut down and if the power cable is removed, the battery drains eventually and it is flat.

    Also if the lid is closed and laptop computer goes into sleep mode, and left with the lid closed for a few hours (with power connected), on opening the lid, I can't get PC to come out of sleep mode and must finally make a 5 seconds press hard stop.

    The laptop is as it came, standard, with any other connected device. He runs a processor Intel I5 - 2520M.

    He reports any errors.

    concerning

    W

    I think it is best that seek you assistance of the warranty on it, call 131 426 option 1, then 2.

  • Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

    Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

    For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

    See you soon,.

    GB

  • Photos in the camera roll on 'iPhone' cannot be imported because the iPhone is locked with a password or read

    6 + put iPhone updated to 10.0.0.2 and now get the error, the pictures on the Filmstrip on "iPhone" cannot be imported because the iPhone is locked with a password or read. You must enter your password on the iPhone to view and import them.

    Working solutions proposed so far. Guess I'll have to wait for the correction of a bug to Apple...

    iPhoto 11 (9.2.3); OS X 10.6.8

    On the alert to "trust this computer" on your iPhone, iPad or iPod touch - Apple Support

    LN

  • 128 Gb iPhone problem 7 with Focus/Light PhotoCamera

    Hello world

    I had a 7 128 GB iPhone with iOS 10.0.2

    I have 2 different problems, and I would like to speak with you all.

    All first with camera...

    If I try to update manually on a dark point, and immediately, a glimmer of hope; at this point, all screen becomes dark.

    Second thing...

    I also have an iPhone more than 6 s and iOS 10 is much faster than the iPhone 7.

    Whenever I close an application to return to the home screen; the animation is delay... I don't really understand how it is possible with this material.

    With iPhone 6s more with same IOS (10.0.2) happen... is very fluid.

    Simone

    See the instructions in this link, under the heading "your photos are blurry or fuzzy":

    Please come back and we all know if this was helpful.  Good luck!

  • Sync my iPhone on Itunes with NAS library

    Hello

    I used to sync to my iphone via itunes with iTunes library that I have stored on my NAS.

    I have a new computer and want to do it again.

    I had iTunes able to access my library iTunes stored on the NAS, I can play the music on my computer but when I want to sync my iphone, the obly on which I am authorized to do so by Itunes is the local library, not the one on the NAS.

    How can I make the NAS library one to use for syncing my Iphone?

    The phone searches for the exact same library file used the last time that synchronize you the phone with iTunes.

    Hold down the option key while starting iTunes. When you are prompted to select a library to select the file iTunes Library.itl the SIN. If it is not there then you have not kept the entire library on the NAS and the left critical parts of your library back on the old computer.  The only recourse is to get these files to this computer or a backup.  It is usually best to use a portable library but with a SIN, you can run into all kinds of trouble with any iTunes library. In this case, I suspect I know what the problem is, but there are several NAS posts here where we have no idea why a library all of a sudden I have messed up. iTunes and NAS do not play well together.

    Article turingtest2: make a portable split library - https://discussions.apple.com/docs/DOC-7392

  • Can apple care can be added to the iPhone 6s more with tiny lesions.

    Can care Apple can be added on an iPhone 6s more with a very small corner crack and the tooth. I mean small.

    N °

Maybe you are looking for

  • Update Adobe flash / still cannot display videos

    Please help me! I downloaded the latest version of Firefox & when I try to watch a video, I downloaded Adobe Flash player... - they say that I can only see if I download the Flash Player!

  • New hardware, BSOD! Help!

    Here is the error I get. Signature of the problem: Problem event name: BlueScreen OS version: 6.0.6002.2.2.0.256.1 Locale ID: 1033 More information about the problem: BCCode: d1 BCP1: FFFFFA60012F5804 BCP2: 0000000000000002 BCP3: 0000000000000008 BCP

  • E-mail for direct broadcasting blackBerry Smartphones

    I can't spread my BB email as I can leave the office. I have all my contacts on my BB with their different categories but only able to send individuals. What I am doing wrong?

  • Problems with the last update CC.

    Updated my ID and PS and neither works now.  I had to go back to the CS6 and just to get the completed files.  I pay the monthly fee for software that do not work. Have uninstalled, restarted, yadayadayada without success. Now I'm afraid to do the up

  • Web page does not load VCD

    Hello!After installation and configuration of VCD, I start the service, but the site shows a gray background, nothing else.In the log file, I found the following:Application installation: startAll system properties required are presentAll the require