iPhone 7 bose headset does not when you use adapter

the head phone microphone does not work on the iphone using the adapter 7. Everyone knows about this problem?

Hello

Other users have reported the same problem.

He can help, at least temporarily, to disconnect and reconnect the headset to / la carte.

A user says that Apple can work to correct a software bug.

I suggest that you let Apple know that you are also facing this problem:

More information (for example):

Problem with iPhone 7Plus, lightning audio commands, connector and inline

Tags: iPhone

Similar Questions

  • I remain unplugged for a long period of receipt message that dns does not when you use windows 7

    I remains disconnected for long delivery message that dns does not when you use windows 7, wired LAN

    Concerning

    NAWAB IKRAMULLAH KHAN

    Hello

    ·          When the issue started?

    Method 1:

    Run the Windows 7 network troubleshooting and check if it can automatically find the fault.

    For more information about how to run the network troubleshooter, check this link:

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Get the network store event of Event Viewer logs.

    Check out this link on the event logs of the resolution of network problems.

    http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

    Method 2:

    a. Click Start. Type cmd in the box start the search. Right click on cmd and select run as administrator.

    b. at the command prompt, type the following command and press ENTER:

    ipconfig/flushdns (there is a space between ipconfig and /)

    It will show you the message successfully empty the cache of DNS resolution.

    c. at the command prompt, type the following command and press ENTER:

    ipconfig/registerdns (there is a space between ipconfig and /)

    d. at the command prompt, type the following command and press ENTER:

    ipconfig/all (there is a space between ipconfig and /)

    e. the command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

    f. If your connection to the Local network IP address is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.

    g. If this is the case, try this:

    ·          enough ipconfig at the command prompt and press ENTER.

    ·          ipconfig / renew in the command prompt and press ENTER.

    h. test it again by typing ipconfig/all to see what is the address?  (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  • Motion/opacity (yet) does not when you use the time remapping effect

    OK: Here's my meat. This bug has been around for CS3 and CS4. I was hoping this would be fixed with the arrival of CS5, but apparently it still has not been resolved.

    If you use the time remapping effect in the body, you can not use the other features of keyframing, such as movement or opacity. If you do, the video simply disappears. Rendering will not help either. The only way to get the opacity of the function is to overlay a video black bar on the top of the element (or any other cache of color if you like fantasy) and have the opacity on this clip in reverse work. How to get movement in these clips remapped time to work is still somewhat a mystery to me...

    Has anyone found this tedious, boring/irritating?

    So, when can dear Adobe, we expect a fix for this? If all goes well before CS6.

    Thank you very much.

    Richard

    Yes, it's a real annoying bug.
    Simple around - after work you time-remapping your clips, nest (control-click on the clip and select 'nest'), then you can change the opacity normally.

  • Page tiles showing not when you use Adobe Muse and webmarketing accommodation

    Hello

    I created a muse site that has good page titles display in the browser when you use the bases web hosting. But I need the same site contains a blog now so changed hosting to web marketing, this has as consequence the pages not showing their page titles in the browser

    Does anyone know why this is, or what I can do about it?

    Thanks for any info

    concerning

    Martin

    The page title does not change with the change of site map, unless it is done manually, or if it is updated the file is downloaded from Muse.

    Please check the titles added to the page if they exist or not, there is always the same question, enter the url of the site.

    Thank you

    Sanjit

  • iPhone 6s txt notifications does not when it is combined with watch

    I have a different ringtone for contacts important such as the pages of work or family and friends.  I get only the tapping of the watch on my wrist... the ringtone is not audible on my phone when it is associated with my Apple Watch.  is there a setting I'm missing here because I can't miss my work pages.  My Apple Watch setting is on my iphone for mirrored text messaging

    It is by design. When you watch unlocked (that is, you wear it) and the phone is in standby mode, all notifications will be directed to your watch instead of the phone survey. Custom notification sounds are not played on the watch.

  • iPhone 7 Touch ID does not when the plugin loader

    I just got my iPhone 7 yesterday, and I had noticed that the ID to touch (fingerprint recognition system) does not work when it is connected to the load. The charger works perfectly fine and charge my phone and nothing else seems to be a problem with my 7. When I unplug it loads the ID Touch works perfectly well.  When connecting my iPhone 7 on my mac with cable charger having exactly the same problem.

    I noticed in fact just that.  I noticed problems with Touch ID on my 7 more however I had no idea why.  I got into it today because of the screen and it is still not resolved yet.  Last effort is to restore the phone completely.  If that does not work they will replace it.  When I saw your post, I tried Touch ID works when it is not connected, but when I plug in my MacBook Touch ID does not work.  Very interesting, maybe a software problem in the 10.  I'll tell Apple when I'll be back tomorrow to return a 3rd party Flash cable does not work on the fact that I bought today.

  • Mail does not when you try to delete the message attach a file on new message

    I bought my wife a new MacBook, retina 12 "early 2015, 1.3 GHz Intel Core M, 8 GB 1600 MHz DDR3, running OS X El Capitan 10.11.3 with his old Mac, she would frequently get the ball from spinning to death when she tried to delete an e-mail message, and also when she creates a new message and tried to attach a file.  I was hoping that the new computer would solve this problem.  However, he still does sometimes, but not as often and does not have as much time to finally react.  Activity monitor says that the Mail does not respond when the small wheel is happening.  Looks like there is a corrupted somewhere file that got transferred to the new computer.  Any suggestions on how to solve it?  Previous posts suggested to remove the tray to sand, but the method, that said, does not have the folder that I had to remove.

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • CTRL and alt does not when you select the picture to join

    I'm not very techno and hope someone can help me find an answer... when trying to select multiple photos to attach to the e-mail, I used to use the CTRL and ALT keys to select several photos.  This does not work for me now.  Are there settings that I can change to get this working again?

    ALT? Are you sure? CTRL + click (for the selection of random photos)
    or shift-click (to select an entire group) works for me.

  • Windows does not when you try to copy files from a micro sd using a T-flash card

    I have never had any problems to copy files to a flash drive in the past, but recently, I encountered this problem. Windows Vista, connected to the flash player, open the folder, dragged 1 file, and copied correctly. Attempted to copy a second file and he hung up then says windows does not. I pushed cancel and it also says windows does not. He would not cancel function so I went to the Manager of tasks to complete, but without success. I had to reboot the computer, I have tried to reboot several times and tried to copy but without success. Any suggestions on how to fix it?

    Hello

    The same information on the key USB applies to map drives
    so do not put all the files and folders to the root of the drive.

    Have you tried the card in other card readers? Sometimes the reformatting
    the map will refresh it.

    ======================================================

    It is the troubleshooter for the readers of SD cards which of course is very similar.

    If you can not get the card reader to work, it can be replaced or an external card reader is not
    Dear.

    They go bad sometimes. Try these:

    / Settings (BIOS/CMOS) often F2 when you start then look at the screen - make sure that the USB port is enabled.

    -----------------------------------------------------------------------------------------------------------------------

    Control Panel - Device Manager - hard disk - drive SD card or similar - double click - tab driver-
    Click on update drivers (this likely will do nothing that MS is far behind the certifying drivers) then right click
    following the UNINSTALL.

    Now bring the controllers USB - right click - UNINSTALL everything in category one at time EXCEPT
    the category itself - REBOOT. This will refresh the USB driver stack.

    Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as
    all USB devices that you previously used. Run Options and check the 1st three choices to see if one is
    it. you can remove all instances of the drive and restart again.
    http://www.NirSoft.NET/utils/usb_devices_view.html

    Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
    Right-click - look RUN AS ADMIN to see if there is a drive letter assigned or a conflict.

    Check with the manufacturer of your system for the updated drivers - some card readers to do not use windows
    drivers.

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Hope that helps.

  • Internet does not when you open windows live mail

    When windows live e mail response of opening pages is internet does not not and ends.

    I have windows vista.

    http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

    Discussions in Windows Live Mail Desktop

    They should be able to help you when repost you your question to the highest Windows Live Mail Discussion Group.

    See you soon

    Mick Murphy - Microsoft partner

  • @ Key keyboard does not when you connect on PC

    When I try to connect to a Windows 7 PC with password home@2015 the keyboard does not recognize the @ key and I have to use shift2 instead.

    Once I'm connected to the PC the @ key works only fine no problem at all.  It is only when you connect what happens.

    I checked keyboard settings and they are correct and the same as any other PC that all work properly.

    I don't know what else to check if anyone can help please.

    All sorted now.  This is the registry which has been set at US UK No.  This was changed and notation in a work properly.

  • SSO does not when you log in Win7 VM - second connection required

    Created new desktop Windows 7 in a pool of related clones. Customer use of view to access the new virtual machine, I am invited again with Windows 7 login. It is not passing through the SSO for Windows login credentials.

    With the help of this document (KB 1029391) I checked the following:

    To solve problems when using SSO in a VMware View environment:

    1. Confirm that the installation of the Agent/Client or configuration is correct. During the installation, select log on as current user.
      1. This is defined in the Client, tried to use HTML and Client Access, same result. You are prompted with Windows login after a successful login to VMware.
    2. Check that disclaimers or banners of login are not used when using PCoIP display protocol. For more information, see Black View Client enter screen when using PCoIP (1016961).
      1. No banner or notice are used or see, there is also no symptoms "black display.
    3. Confirm that the userinit is properly configured to pass credentials. For more information, see confirming that the userinit string is configured properly (1028975).
      1. Checked and double-checked. Copy? pasted from this document without a change in the symptoms.
    4. Confirm that GINA is correctly chaining. For more information, see confirmation that GINA is chaining correctly in VMware View Manager 3.x/4.0.x/4.5.x (1029075).
      1. The article says that this does not apply to Windows 7 workstations.
    5. Make sure that no group policy conflicts. For more information, see make sure there are no conflicts between Group Policy objects and view virtual desktops (1027446).
      1. Have spent hours looking into policies using the resulting strategy game. MSC, impossible to find something that would seem to be linked to the process of connection.
    6. Ensure that the Interactive logon: require no policy GPO of CTRL + ALT + DEL is disabled. For more information, see Single Sign-on does not work in the VMware View desktops (1026797).
      1. It is also checked and properly adjusted.


    I also checked the setting mentioned in KB 1019466:

    On Windows Vista, if you install the PCoIP server component, the Group Policy window disable or enable software Secure Attention sequence is enabled and set to the Services and ease of access applications. If you change this setting, single sign - on does not work properly.  Ensure that the Group Policy window disable or enable software Secure Attention sequence is enabled and set to the Services and ease of access applications. It is also defined as stipulated here.

    Anyone have any ideas? I have spent an embarrassing amount of time on this and have no close to get the SINGLE sign-on to work. I must be missing something - but what?

    Thanks for the suggestions folks. After a repair, I started to remove components from the equation and found the problem to be Imprivata, we use for our SSO here. Apparently the version I was trying to use was having problems with Windows 7, because we installed a newer version (after update our device) and voila! the OSP has worked perfectly. I don't know why I thought that earlier, I hope that this thread will save someone some time.

  • Calendar does not when you choose in the date picker

    Hi guys,.

    I hope someone can help.

    I have a calendar on Page 2. This calendar contains a date picker (P2_CALENDAR_DATE) that allows that a user to select a date, and then the calendar updates with the selected date.

    The problem is that the format of date selectors P2_CALENDAR_DATE, it's not how we want to what he (YYYYMMDDD) so we changed to (DDMMYYYY). The problem is when we submit page update the calendar does not allow for this format.

    So I guess my question is, where is the process that updates the calendar according to the date (im assuming that it's built in).

    Thanks in advance!

    Concerning

    Spam

    Hi Spam,

    ApEx integrated processes that allow the movement around a calendar expect the calendar date format is YYYYMMDD, so you don't want to mess around with the format of P2_CALENDAR_DATE. There is a way around this:

    (1) start with get parameters of P2_CALENDAR_DATE back to the way they were created. Back to a hidden field and set the format to YYYYMMDD (remember the format specified in the item parameter by default as well).

    (2) create a new date picker item, call P2_PICK_DATE for example. The date of this item to DDMMYYYY format.

    (3) create a "print" button if you don't already have one that submits the page with the entry P2_PICK_DATE.

    (4) create a sur-soumettre PL/SQL conditional processes when you press your button 'print', with the following code:

    :P2_CALENDAR_DATE := TO_CHAR(TO_DATE(:P2_PICK_DATE, 'DDMMYYYY'), 'YYYYMMDD');
    

    Therefore, when the user enters / picks a date in P2_PICK_DATE and clicks "go", this process is triggered which will convert the date chosen in ApEx format expected and store it in P2_CALENDAR_DATE. During the updating of the agenda, it will be on the selected date.

    Hope this helps,
    John

    If you find this information useful, please do not forget to mark the 'useful' or 'correct' post so that others benefit as well.

  • Does not when you browse many tabs.

    When I open many tabs and browse in this tab, then the Firefox 4 browser is unresponsive. This happens especially when I navigate on any kinds of download page for all sites. Some time later he solved automatically and I can sail again. What can I do now?

    If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

    • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
    • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
  • the icons on the desktop does not when you click on

    no desktop icons do not respond when clicked on

    no desktop icons do not respond when clicked on

    1 Rebuid icon Cache...
    http://www.SevenForums.com/tutorials/49819-icon-cache-rebuild.html

    2. If the icon Cache rebuild does not help...
    Press Ctrl + Alt + Delete all > click Task Manager > processes tab > right-click on explorer.exe > click on end process > Application tab > new task... > in the Open box, type explorer.exe > OK
    Check the icons on the desktop.

Maybe you are looking for

  • HP 14 laptop computer: disk use 100%

    Use of the disk has skyrocketed to 100%.The laptop has been in place for some time now. It freezes all the time and at the same time prevents me from doing anything on the laptop. Even open a folder a few times. Start of the seem.Summer to try everyt

  • How Split items in a table

    Hi guys I have signal consisting of a few numbers... .they are declared separately to Labview as x, y, z. So I need a way to group 3 these items in a table (for example) as x refes to a data point, number there is tension and z is the current. I woul

  • Wireless does not Stand mode.

    Computer laptop Gateway when put on standby and off standby WiFi lost. Wireless on Belkin G Router not. easy solution? Send it to me asap * to email dot com Thank you!

  • E280 dropped... now it does not work - HELP!

    I dropped my e280 and now it does not start.  Here's the thing... I can always connect to my PC and can still transfer music, playlists and so on.  I have a car charger, and when it is connected, I can listen to the music and see the songs, etc..  Th

  • Ethernet transfer does not-router E1200

    Hello I recently got a new ISP (single digits), they claim they use the service to transfer Ethernet (T1?). They have 1.5 mb upload and download speed. They installed a 'box' in which I take an ethernet cable and connect directly to my computer and w