iPhone 7 - camera can not focus/blur distant objects

Similar Questions

• Excite - AT10PE - camera can not focus the image correctly

  When you use the camera, sometimes that can put the image incorrectly.
  You have it too?

  My screen AT10 has a slightly reddish. I used the 'filter your screen', but it is not fair. Addressed to someone?

  After that update to version 4.3 takes the focus is still wrong - fixfocus - infinite - cannot be set. Missing manual calibration. When I put infinity, should be on the horizon. But it's not. It's good to see the apk mobilwebcam or KennyCamera.

  In addition, the camera does not work with the exhibition.

  Oh, another discovery. When the camera lens lend a lens with a focal length of 200 mm, so the focus to infinity corrected at once:-o. As the lens on the tablet had the focus more than necessary!

• 6 s iPhone front camera does not work

  Anyone know why my front camera of the iphone 6 s does not work?

  The rear camera works fine, but when I turn the secondary camera, first he showed a blurred image of rear camera and then next I can see, it's a cliché of the last capture of the rear camera (which automatically captures). Is - this problem is hardware or software? I never drop my phone, but have just updated from multiple applications. I tried several solution by resetting the phone, restore to the original (new phone option) and none of them works for me. Bought the phone 2 months of the United States.

  Sorry, but if it back to factory settings without using the backup data did not return the front camera function, you need to get the phone repaired, your camera is still under warranty.

  If you are outside the country of purchase, you will need to bring him back to this country, for an iPhone warranty is valid only in the country of purchase, and Apple is not delivered at the international level.

  Launch a service request

  Find an Apple authorized service provider

  Make an appointment at the Apple Store

• IPhone opportunity bought, can not activate it because the owner forgot Apple i.d/password

  Bought a second hand iPhone 6 a young student, when we arrived there we couldn't get beyond the point of activation because it required Apple owner ID / password. He does not remember, no matter what ways to hard reset it? Also saying that he needs a Sim Card?

  It is locked to the former owner Activation. If they can not unlock the phone will never be usable again. He can go to https://iforgot.apple.com, which can help him remember his password. Failure return it because it's worthless.

• New iPhone on Cricket, can not modify or reproduce Visual Voicemail greeting

  I have an iPhone SE I just myself, set up Visual Voicemail with Cricket in the application the phone iOS tab voice mail Worked fine. But now, when I go to the reception area, the buttons don't ' work and I can not read. I can just hit Cancel.

  When I play with her maybe change my cell data on and outside occationally I can get it to read and the buttons work until I leave the screen and come back back, but usually it does not.

  I tried to reset network settings, bottling the phone on and off, reset voice messages access code in the settings of the phone and cricket appeal, does nothing. I can find voicemail and read it, just the reception area doesn't let me do anything and I would like to know what is the cause.

  VM is usually mediated by

  Each carrier has their own way to set up the voice mail process
  There is no standard setting for VM in iPhone itself

  Chat with technical support of Cricket OR

  You can consider using Google Voice Lite - it's free and removes the dependence on the carrier

• iPhone 5 s can not active with the Apple ID

  My 5s iPhone has just been reset, however, I could not active with my ID to iCloud. A single pop up notification "could not use this apple ID active thi iPhone in the parameter list iCloud, we saw again.» Then, I removed it from the list, but I still can not active there.

  Hi Phuc Bo,

  Looks like you were using your iPhone very well, but after a reset you can activate it no longer.

  Please scroll through this article for help.

  If you can not activate your iPhone - Apple Support

  Best regards.

• BlackBerry Smartphones camera does not focus at point-blank range

  I just got the bold 9900 and the camra does not focus on the fine print is it a way to solve this problem?

  Oh that sucks BIG time oh well * beep * happens other then this problem, it's a great phone thanks for your help with my problem

• My IPhone 6 camera is not saving all the blurred images and screenshots (he wasn't like this 2 hours ago) iOS 9.2.1 update was done 2 days ago

  Camera not recording pictures

  Blurry screenshots

  IOS 9.2.1

  I was able to solve the same problem by going to:

  Parameters-> reset-> reset all settings

  He deleted my settings such as sounds, etc, but he fixed the outcome of my picture.  I hope this helps.

• try to photograph a sunset through the tree branches, but the camera will not focus correctly

  I have a SX50HS, I'm trying to take a zoom of the sunset through trees, but the camera will be only focus on the branches... trying to get the Sun in short

  I agree with the manual focus to infinity. I think that you will have little problem get enough light in the camera for a fast shutter if you are shooting and counting of the Sun!

  Something will have to be badly exposed, because the Sun is so bright, and the hidden tree side is not. If you meter the Sun get beautiful orange, the tree will be a dark figure. Adjust the exposure for the sky a little left or right of the Sun, not the sun itself for best results. I'm not used to the Powershot cameras, f/5 might work, but on a DSLR, you would probably like an opening narrower, like f/8 or f/11 or even higher.

  This is probably the way to go rather than dosage for the tree and saw the sky blown completely out., but you can try both ways for fun.

  Good luck!

• Compact Sony Z3 camera will not focus

  I had a Sony Z3 Compact for several months now and at first was very satisfied with the quality and sharpness of the images sound produces camera.  However, I recently noticed that the camera sometimes refuse to focus.  The center of the image seems rather distort back and forward but not to focus.

  I tried to look on the support and community forums to get suggestions on how to do, but I got a lot of help.

  I discovered that sometimes in pressing the lens or tapping gently on the area of the case with the lens will solve the problem temporarily.  For these reasons, I suspect something has come loose or moved in the focusing system.  Is it possible on this model?

  Further, I tried several alternative camera apps to see if they all meet the same problem.  In addition to the stock camera app, I tried; Google camera, A better camera, open camera and Instagram.  All the same problem of the development of experience.  The only thing that seems to bring the image to the home for all is a gentle tap or the pressure applied on the lens (one or the other).

  I managed to use installation of the record screen to capture the camera not developed:
  - https://www.youtube.com/watch?v=YD5DGF3gWJ4
  - https://www.youtube.com/watch?v=DUfRTdZfAZg
  The second video shows better the fish-eye lens effect I do not see where it does not seem to focus.

  I do more to permanently fix the problem with the update?

  It's a question that has been seen with other phones and could be repaired if I go back to the phone to a service center?

  Other people experience a problem like that?

  I suggest that you try to repair the phone using PC Companionsoftware, to rule out the possibility of software problems.

  Before the repair of your device, you can back up your information first. See this topic for more information on how to.
  How to backup?

  If the question must remain, I think that this must be examined and fixed to a repair center. For more information on how to submit your phone for repair and where, contact your local support team.

• iPhone and iPad can not connect to iMac

  I can't connect my mobile to my iMac using edge inspect. Inspect Edge runs on my machine and in the browser (the icon lights up in the taskbar of Chrome), but when I try and connect my iOS via the Soft Edge devices inspected on each of them, they do not see my iMac and any attempt to use the results of "Manuel Connect" (with any of the 3 IPS listed in the box to the menu of the Chrome plugin) in an error message :

  "Connection failed, please try again."

  I have the latest version of iOs and the edge inspect running on my iPhone and iPad applications, OS X 10.8.3, Chrome 26.0.1410.65 with the plugin dashboard inspect inspect running on my iMac and the latest version of the app from edge checking 7682 port is open on my iMac. Inspect edge is shown as allowing incoming connections through my firewall. I tried to restart the Mac, nothing helps.

  TL; IND: I have tried everything I can find online to get the app to work, but my devices cannot 'see' my iMac. Can anyone help?

  (If it's important, I'm under a BT Home Hub 3.0 for my home network.)

  Solved the problem - all I had to do, has been turned off my router. Schoolboy error!

• Firefox home iphone problem, I can not open tab count in the preferences to manage and can not connect to iphone due to an unspecified error, what to do?

  Question

  I have another type of problem with Firefox

  Description

  When I log in to firefox home on iphone I get message "connection failed unspecified failure" and that it also manage the tab account in preferences on mac does not open what to do?

  This has happened

  Each time Firefox opened

  Version of Firefox

  3.6.6

  Operating system

  Intel Mac OS X 10.6

  User Agent

  Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6. en-US; RV:1.9.2.6) Gecko/20100625 Firefox/3.6.6

  Plugins installed

  • -Plugin by default gecko
  • Run Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run the test version: Java information.
  • http://www.Facebook.com/fbplugin/
  • Flip4Mac WMV Plugin allows you to view Windows Media using QuickTime content.
  • iPhoto6
  • Java 2 plugin for NPAPI browsers
  • The Google Earth Plugin allows you to display 3D images and field in your web browser.
  • 3.0.50106.0
  • DivX Web Player version 2.0.2.39
  • Shockwave Flash 10.1 d81
  • The QuickTime Plugin allows you to display a variety of multimedia content in web pages. For more information, see the Web of QuickTime site.

  July 23, 2010 Topic 'resolved' has left Firefox Support Forum for Firefox Home iPhone App Support Forum.
  
  http://support.Mozilla.com/en-us/Forum/6/728473 (for the record). AW

  Thanks for the link! Basically, I go to privacy settings in firefox prefrences and together do not forget history for 0 days or more in the custom settings.
  problem solved!

• All Iphones and Ipads can not find via AirPrint printers.

  
  

  Hi Bill,

  Believe that the problem is related with your router multicast support, it is essential to support the mulitple packages to use AirPrint.

  The following discussion about the choice of your router IGMP Snooping can help solve the problem:

  https://discussions.Apple.com/message/22131110#22131110

  I would ensure that iOS devices are connected to the 2.4 GHz wireless network, the printer does not support the connection of 5 GHz and two devices must be connected to the broadcast wireless in the same range.

  Hope that helps,

  Shlomi

• 9 IOS iPhone App Maps: Can not erase ALL of my search history, only some of them.

  I was able to remove most of my search history in maps by typing on the field of RESEARCH, tapping FAVORITES, then RECENT tapping on the bottom, then tapping CLEAR on top.

  However, there are 5 left entrances where there is the word before them.  3 are contacts, I know 1 is a text of a contact I have more in my phone, and the last is an application.  How can I get rid of all?

  Thank you.

  I have this issue too, impossible to delete the history of research since 9.3. There are always 3 entrances and they change automatically if I read an email or if I get a text message...

  Help please.

• Bug: the camera can not initialize

  Just had a one-time bug on the camera. Whenever I pressed the camera button, he would sit for a while nothing doing, try to rotate to landscape for a split moment and then come back with a floating error: camera fails to initialize. I tried several times.

  A reboot has solved this problem, and everything is back to normal.

  I captured a logcat using CatLog (the recommended aLogcat worked well for me):

  http://pastebin.com/bcQWuLt1

  The logcat was stripped of my personal information, and is only partly relevant.

  I hope that this will help to track down the bug.

  Double locking this thread. Please report any new comment here.

  Mark
  Support Forums Manager