iPhone and iPad does not connect to internet

Hello

Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

I think it must be something with the update iOS because:

-J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

-My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

-My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?


I really appreciate your help!

If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

Try this:

Restart your router (unplug unit, wait ten seconds and then reconnect it).

Wait for the router shows all lights normal and connected.

Now, reboot your iPad or iPhone

Tags: iPhone

Similar Questions

  • iPhone and iPad can not connect to iMac

    I can't connect my mobile to my iMac using edge inspect. Inspect Edge runs on my machine and in the browser (the icon lights up in the taskbar of Chrome), but when I try and connect my iOS via the Soft Edge devices inspected on each of them, they do not see my iMac and any attempt to use the results of "Manuel Connect" (with any of the 3 IPS listed in the box to the menu of the Chrome plugin) in an error message :

    "Connection failed, please try again."

    I have the latest version of iOs and the edge inspect running on my iPhone and iPad applications, OS X 10.8.3, Chrome 26.0.1410.65 with the plugin dashboard inspect inspect running on my iMac and the latest version of the app from edge checking 7682 port is open on my iMac. Inspect edge is shown as allowing incoming connections through my firewall. I tried to restart the Mac, nothing helps.

    TL; IND: I have tried everything I can find online to get the app to work, but my devices cannot 'see' my iMac. Can anyone help?

    (If it's important, I'm under a BT Home Hub 3.0 for my home network.)

    Solved the problem - all I had to do, has been turned off my router. Schoolboy error!

  • App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

    But Google chrome works well.

    So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

    (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

    2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

  • iPhone 5s does not connect to internet unless its connected to wifi

    I have a 5 s IPhone it does not connect to internet unless I'm at home connected to wifi. I can not send imessages or browse the web what should I do?

    You did that mobile data is turned on in the settings/phone/cell data?

    Also, make sure that the apps you want to use for the cell data are enabled in the list below these settings.

  • BDP-S570 - does not connect to internet via wifi

    I just bought this today and it does not connect to the internet via wi - fi. I'm entering properly (my iphone, ipad and computers connect very well). I called tech support and they had no idea what either. I then connected with an ethernet cable, updated to the latest firmware and tried again with no luck. Does anyone have any suggestions? It shows that the wireless is OK, but Internet Access - failed. When I return to the guests and have it analyzed the available networks, it shows that I am connected... something is weird. I'm back if I can't make it work in the next day or so.

    Network problems can certainly be difficult to diagnose.
    Here are some useful steps to check where your problem is.

    Check the IP address: is it 192.168.x.xx? or 169.xxx.x.xx
    If you have an address 169 it is a fake connect.

    What kind of network do you have? It's a Modem/Router combo? This is a modem connected to a router and then your Blu - ray player.

    the router/Modem combos are more complicated, and you need to consult your provider of Internet services (ISP) to connect to help. (maybe a MAC filtering problem?)

    If you have a problem with your Modem/Router try get a router and connect to the modem, you can have the best success with a stand-alone router you will have with a handset as they are less complicated to use.
    If you already use a stand alone, try to temporarily disable your security and test it without warranty.

    is the firmware updated on your router (not the S70 but the router) the latest firmware is sometimes useful.

    Best regards
    Kimberly

  • You cannot be activated because the iPad does not connect to the server

    You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

    What is the wording accurate and complete error message?

    If she says the activation server cannot be reached/contacted

    There are 4 possible causes for this error message:

    1] activation server is actually down. Very rare and of short duration when it

    Sometimes. Solution - try again.

    [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

    temporarily disable your firewall and/or antivirus software, up to the end of the activation.

    [3] computer used for activation has been used to jailbreak an iOS device in the past.

    Solution - use another computer.

    [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

    the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

    prohibited.

  • New updates of Windows since 06/11/12 is originally Vista does not connect to Internet Explorer

    I have a desktop with Vista CAREB.  It has always worked well until about June 11, 2012.  Now it does not connect to Internet Explorer. It says it is connected to the internet and that has been verified by our server.  Tried everything and eventually restored it and no problem.  Then the next day, same thing and restored.  Next day same thing so I disabled all updates and no problem.  What new update windows made in the last few days which is the cause and what can I do?

    Thank you

    Hi Judy,.

    We cannot verify that Windows Update is causing the problem, I suggest to install the Windows updates one by one and make sure that Windows Update is causing the problem.

    Windows Update

  • Windows live mail does not connect to internet

    Windows live mail does not connect to the internet, keeps telling me that I'm working in offline mode, and then does not connect when there is a link.

    Try to check the setting of Internet Explorer offline.  It just open IE, press alt to display the menu bar, then click on file and make sure that 'Work offline' at the bottom is not checked.

    Also just good habit, make sure that you are on the latest version of the application by downloading the package at http://get.live.com.

  • I am able to connect to internet but when I switch to the amother user account it does not connect to internet

    on my computer, I am able to connect to internet but when I switch to the amother user account it does not connect to internet

    Hello

    1. Is there an error code or the message that if displayed when it is unable to connect to the Internet?
    2. You use a wired connection or wireless?
    3. You use the administrator account or standard account?
    4. All changes made to the computer before the show?
    Method 1:
    Check out the link and follow the steps.
    Method 2:
    Visit the link and try the troubleshooting provided steps.
    Why can't I connect to the Internet?
    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  • LENOVA IBM THINKPAD DOES NOT CONNECT TO INTERNET

    I have a treadmill thinking Lenova T60 IBM and it does not connect to my home network secure wireless. I have other laptops (MAC and DELL) which are connect well but my IBM will not find all networks in range, no matter how many times I have updated it. I don't know what the BIOS is and how to access it. Can someone break the instructions in the simplest way for me please? Thank you

    Silly question, the radio is activated? There is a switch on the left front of the machine.

    I hope this helps.

  • iPhone connects to the wifi but does not connect to internet

    I have an iPhone running iOS 9.3.2 6s (last updated).

    The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

    This also happens with my daughter 5s iPhone and iPad for my son.

    Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

    We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

    I tried to go into my phone settings and reset the network.  Always problems.

    It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

    Council: https://discussions.apple.com/docs/DOC-9892

  • my iphone, ipod and ipad are not connect to my i tunes player on my windows laptop

    I need help, nothing does not connect to my i tunes there is nothing indicating that it tries to connect. I know that there is nothing wrong with usb because he is in charge.  In the hope there is someone out there to help. my phone does not work and needs backup

    Thank you very much

    Try the following:

    1. Open Control Panel > Device Manager
    2. Plug in your device
    3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
      It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
    4. Right-click and select software update of the driver...
    5. Click Browse my computer for driver software
    6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
      C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
    7. Click on let me pick from a list of drivers for devices on my computer
    8. Click on Apple Mobile Device USB Driver
    9. Click Next, then close and exit the Device Manager

    Or try If iTunes does not your iPad, iPhone or iPod - Apple Support.

    If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

    TT2

  • Firefox starts in offline mode work and does not connect to internet

    Firefox disconnects randomly internet. Work off line option is checked then when somehow naked - Firefox still does not connect. A re-start the computer him more often, solved the problem. What is new and I did not any changes recently. Running Fox 3.6.3

    Try going to Tools - Addons - Extensions and disable your extensions one by one to see if one of them is at the origin of the problem.

  • My laptop has not been used for a year and now does not connect to wireless internet?

    My wife's cell phone has recently been repaired (power Cable plug damage) and has been missing for a year. We both used my laptop which connects to the internet just fine. The laptop connects to the network but does not connect to the internet. I tried all suggestions that our Windows Diagnostics, as well as other ideas for myself but had no chance. The continuous diagnostic message to read "cannot communicate with primary DNS 194.168.4.100 server. My only thought is that perhaps because of the amount of time it has been used as the network driver can be updated, although I don't know how to upgrade without connecting to the net?

    Hello

    Follow the suggestions and then check:

    Method 1.

    Let us reset TCP/IP and check.
    To reset TCP/IP stack to go to this article and follow the instructions.
    http://support.Microsoft.com/kb/299357

    Method 2.
    Step 1.

    1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
    2. make sure that you are in Setup-> basic configuration category.
    3. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
    4 enable DHCP if you want, you can change the number that starts the DHCP IP setting. (This is optional)
    5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
    6. scroll and click 'Save Settings'.

    Step 2.
    1. click on start and then Control Panel.
    2. go to network and sharing Center and then click on change adapter settings.
    3. right click on the connection to the Local network and select Properties.
    4. Select Internet Protocol Version 6, and then click Properties.
    5. select Obtain DNS server automatically an address and press Ok.
    6. choose obtain an IP address automatically.
    7. repeat the steps for Internet Protocol version 4 as well.

    See also:

    Network adapter problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems Using event logs Windows Network Diagnostics to troubleshoot network http://windows.microsoft.com/en-US/windows-vista/Using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

    Network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • 9.3.2 iOS that wake up my iPhone and iPad a cellular connection. They connect to my wifi until I use them. This means that the activity of the Baker all arrives on my data connection and not my wifi network at home. How can I fix it.

    iOS 9.3.2

    My iPhone and iPad wake connected to cellular data so that I have a home network and expect things to happen on my network home. It costs me in the case of the background activity while I'm SLEEPING on my cell the att network connection. How can I fix?

    Thank you

    Barb

    Maybe a WiFi Assist. On the devices go to settings > cellular > scroll all the way down > Wi - Fi help > Toggle Off. See if that helps.

Maybe you are looking for

  • change the music from iphone

    I open iTunes and connect my iPhone to my computer. Click on my iPhone in iTunes, click on music. I see the music on my iPhone. Click on a song, press DELETE. Nothing. Right-click on the song, nothing to delete. Search for menus and there is nothing

  • Envy 15: 2nd display Envy 15

    Hey! I was not able to connect to a secondary display since the upgrade to Windows 10. I've updated all the drivers still can't seem to find the problem. Also my brightness adjustment doesn't work anymore (the physical button control or the one on th

  • IDT High Definition Audio error 52

    not implemented error no audio output device installed. Cannot install driver

  • Re: No disk on the Satellite A200 PSAE3E install Win XP

    Dear, I have the Satellite A200 (PSAE3E) and I'm trying to install winXP on it...When I boot from the CD and blue screen, it shows me a massage that "Setup did not find any hard drives installed in your computer? can you help me to start the installa

  • I used to have a power icon in my system for my laptop tray. How can I get that back?

    I don't know exactly when the power icon disappeared from my system tray, so I don't know what has caused the disappearance.   I need to know how get this icon to be able to come back so I can tell when the power is low.