iPhone bluetooth connectivity 7

I've recently upgraded to the iPhone 7 and have had problems of intermittent connectivity with Bluetooth pairing, especially in my vehicle (Kia Optima), but also sometimes with my bluetooth (Jawbone Jambox Big) speaker. With my iPhone 6s, I could always count on turning on the car or speaker and connect it without fail. Now, my car bluetooth could pair one out of every 10 times. My speakers will pair about 75% of the time. When I try to re-pair the car (a much larger issue) often the iPhone will not see the under its section discovered in Bluetooth Handsfree device. This is not the case with my wifes 6s iPhone (it's also on iOS 10.0.1). Does anyone else have this problem?

Finally someone who has the same problem as me! I had noticed the bluetooth icon blink when I was on the phone setting up ApplePay with my CC company but I just thought it was restore my Apple Watch. Then when I left work I set up my iPhone 7 to work with my stereo handsfree in the car. It is remained connected for a little, but then randomly, he disconnects and refuses to reconnect. He does occasionally with my Apple Watch as well. Yesterday, I feel as if I had a stroke of luck using my BT headset since they worked for a good 45 min before I have them cut.

I spoke with AppleSupport on Twitter and I did the steps that they told me to do. I reset the network settings and I have not matched and repaired the stereo several times. The only thing that I did is a complete restoration of iOS which seems odd because it's an iPhone brand new. I hope that it is just an annoying bug in iOS 10.0.1 and that an update will come out in a few days to fix. Worst case is a bad chip BT and I need to swap out for a new phone.

My iPhone 6 had a BT connection problem.

Tags: iPhone

Similar Questions

  • Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

    After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

    I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

    But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

    Thanks in advance

    Hello StasV,

    Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

    Audio routing call - the iPhone user Guide
    Help to connect your iPhone, iPad or iPod touch with your car radio

    See you soon!

  • 6 s iPhone Bluetooth will pair with El Capitan Mac but does not connect

    My employers very kindly gave me a brand new MacBook Pro running the most recent version (10.11.4) of Mac OS X.  What finish set up I need to pair my iPhone staff 6 (running iOS 9.3.1) to the computer I want to use MacID to secure my computer when I'm away from him.  While the phone would pair (pairing being initiated by the Mac) it would be briefly apply status 'connected' before going to "not connected".  When I then tried to establish a connection, I received the following message on the iPhone:

    Connection failure

    'MacBook Pro' is not supported

    and the only option to close this dialog box click the device forget .

    I therefore looked on my personal Mac which had previously been paired with the phone to find that he was is no longer listed in the devices Bluetooth, but when I looked in the settings for MacID running on my Mac it says "Looking for iPhone 6 s.  I tried to re-pair 6s iPhone to my personal machine and had the same results.  When I called in my TI guru we tried with his iPhone 6 (also installed 9.3.1) and had the same results.  As it's been a few months since I used MacID on my computer that I don't know when the link has been broken - after an update iOS or OS X update.  Bluetooth linking to my Apple Watch still works perfectly.  I was unable to try this out with any other Mac, I was looking for one with an older version of Mac OS X.

    Everyone is aware of this problem or have an idea for a fix?

    TIA

    An iPhone will not pair Bluetooth with a computer (Mac or Windows) for one use other than personal hotspot and it will only do that if the carrier is supported. However, there are a number of things will be using Bluetooth between the computer and the iPhone where the devices are NOT matched. More information in Bluetooth: why can not connect my iPhone or iPad with another iOS device or my computer?

    The following link for MacID support site has instructions on how to do the installation. It requires Bluetooth to be turned on in the computer and the iPhone, but the rest of the configuration/connection is done inside the MacID app on each device, not normal Bluetooth pairing as follows: http://macid.co/help/?c=Setup & sc = Pairing % 20A % 20device

  • Bluetooth connection between iPhone and iPad

    My iPhone 6 does not connect to my iPad via bluetooth.

    I previously used the bluetooth connection between my iphone and iPad to connect the iPad to the internet. Despite the two devices were among the recognized bluetooth devices and they were previously linked/partner, it was not possible to establish a connection.

    Perform the actions recommended for repair/reissue apple support - 1. Toggle bluetooth, 2. turn on/off the unit, 3. remove the iPhone/iPad bluetooth connections - 4. Reset network settings - 5. Reset all the settings-, nothing works.

    IPhone/iPad devices isn't even on the list of bluetooth devices available on the iPhone, or iPad. Everything that happens is the animated icon turns all the time.

    Deleting a connection to a device and bluetooth speaker/amp from the pairing of the speaker/amp system process made a new connection.

    iPhone 6:

    Model: MG4F2QN/A

    SN: C31NLG8KG5MR

    Version: 9.2 (13 c 75)

    iPad:

    Model: ME898LL/A

    SN: DLXM42LHFK13

    Version: 9.2 (13 c 75)

    Please give instructions for the previous maintenance work bluetooth connection between iPhone and iPad.

    Thanks in advance

    To use the Hotspot feature (that you described for the connection), you must use the instructions below.

    Share your Internet connection with Personal Hotspot - Apple Support

  • Bluetooth connectivity on iOS 10 issues.

    Given that I have updated to iOS 10, my 6 s iPhone more does not properly connect to my car - 2007 BMW 530xi. I had no problem before updating to iOS 10.

    MY phone shows that it is connected and so does my car. However, my phone calls are abandoned at the beginning of the conversation. I answer the phone through my car, but it won't work for some reason any. Then I try to change settings of the speakers in my car on my phone back to my car nothing helps.

    Please do not ask me to try simple troubleshooting stupid as I did. I used iPhone and products Apple specifically for the iPhone 4. I know what I'm doing. It is only fair that iOS 10 broke some internal features regarding the Bluetooth connectivity.

    If anyone else has similar problems with their 10 iOS Bluetooth not connecting, please state so that Apple can precipitate a quick update. I can not even use my Bluetooth in my car which is very frustrating as I drive a lot for work and won't put on a helmet or something else on my ears while driving as it is useless for me.

    I have EXACTLY the same problem. For me, it's a 2016 X 3, but the behavior is the same. Devices think they are connected, but are not in force.

    I have reset my network connections, I disconnected and reconnected manually and some other stages of trials and errors. None have assimilated to the sustainable, stable connection I had with iOS 9.

  • iPhone bluetooth name 7 incorrect

    Hello. Through background I have recently updated from iPhone to iPhone 6 7. I followed the normal process "full backup using iCloud" copy that whole, including the name of phone (in general/about/name) which initially was "iPhone 6" but I modified manually to "iPhone 7". "

    Today I went to connect to iPhone using bluetooth to attach new 7 and I could not find my iPhone anywhere (even if I could see my iPhone 6 on the list of known devices). After much exploration, I found that despite the iPhone bluetooth 7 screen saying ' now discoverable as iPhone 7 ", its been always seen as the iPhone 6. So, I deleted my old relationships and reconnected to "iPhone 6" (really my iPhone 7) and it worked.

    Am I missing something, or is it a flaw in the operating system that needs fixing?

    I use:

    7 iPhone with iOS 10.0.1

    MacBook Pro 13 "with MacOS 10.11.6 retina

    Thank you

    Joe

    Hello Joe,

    Thank you for asking questions about the name of the device here in Apple Support communities. I am pleased to offer a preview of it and then help you to change the name of the bluetooth connection, so that it matches the new iPhone 7.

    There is nothing wrong, it's just that some areas of the aircraft (such as the name of the phone) will change since you have a new device, because it happens that the information of the current system, as well as the serial number and other information for the personal. That's how he'll distinguish your iPhone backups 7 former iPhone 6 and all other backups device iOS that you bring in iCloud or iTunes. Other areas, such as the name of a device on your Mac, will not access these same areas. If you actually see the name that was saved from the old device in the backup and presented the new device. Fear not though, we can manually change this.

    Please open this help link: change of the name of a Bluetooth device. I'm sure this is the article that you need to change the name of the device on your Mac.

    Thanks again and have a great rest of your day!

  • Music Bluetooth connection while the execution is HORRIBLE

    I've had my Apple Watch - sport watch 42 original - since the date of launch.  I use it all the time.  But from the beginning, I have known a glaring problem and a huge inconvenience: if I try to listen to music via bluetooth to a BT Headset activated during the running/jogging to Apple Watch, transmission is atrocious.  The music signal / autour jumps, there are 2-3 second lag, the signal falls completely, etc..  It does not work perfectly.  And the issue is NOT the BT headset.  The problem occurs on each BT headset, I tried: Dear and low-end models.  These same BT headsets work absolutely perfect w / my Mac and iPhone.  The problem is the watch...

    You can imagine how frustrating is: who wants to listen to music from the Apple Watch for BT headphones when he cut and in a few seconds.  So now, I end up using the Apple Watch to track my physical condition, but am forced to lug along my iPhone if I want to listen to music.

    Here's something very revealing on the signal low/inaccurate bluetooth from the Apple Watch: if I sit stationary or walking like a robot without arms or by moving the head, streaming works much better.  But this isn't a solution.

    How can I fix it?  Is it even fixable or is it just another glitch in the post World Steve Jobs...

    My brother-in-law has the same w/his Apple Watch BT problem whenever it tries to use it as a source of music during the race...

    Hello

    It is a known problem.

    It's frustrating, and it should be fixed. I have experienced the same problems myself.

    You can report it directly to Apple via Twitter: @AppleSupport

    Only one of the thousands of complaints across multiple sites to support > Apple Watch and the Bluetooth connection is terrible during my career.  Anyone else having the same questions?

    You can also provide your comments here > http://www.apple.com/feedback/watch.html

  • you see only not texts in car bluetooth connection

    My husband recently got an iPhone 6 Plus.  In his Mercedes Benz bluetooth connection work and it can make and receive phone calls via his iPhone. However, it gets more texts displayed on the screen of the car.

    Previously, with his phone droid, there was no problem.

    Is it possible to get his text messages is displayed on the screen of the car?

    Apparently the texts on the screen of an iPhone are not compatible with his car. The concession and ask.

  • Poor wifi and Bluetooth connectivity after iOS 9.3.1

    9.3.1 IOS is installed on my iPhone 6 wifi in my house guard fall!

    My Bluetooth connectivity keeps cutting to work! So annoyin!

    General suggestions for Wi - Fi problems, maybe one of them will help you...

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (4) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (5) disable the prioritization of device on the router if this feature is available.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) to restore the device (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

  • IPhone BlueTooth Apple Watch Distance

    I have a few questions:

    1. how far can the Apple Watch connect an iPhone 5?

    2. how far can the Apple Watch connect an iPhone 5 c?

    3. how far can the Apple Watch connect to an iPhone 5s?

    4. how far can the Apple Watch connect an iPhone 6?

    5. how far can the Apple Watch connect an iPhone 6 Plus?

    6. how far can the Apple Watch connect to a 6 s iPhone?

    7. how far can the Apple Watch no longer connect to a 6 s iPhone?

    8. how far can the Apple Watch connect to an iPhone IS?

    P.S. I couldn't think of a better way to Word this, but basically, I mean "how Apple Watch from the iPhone but still being linkable?"

    Hello

    Normal Bluetooth range is about 10 meters/33 feet. Actual range varies in practice because of wireless interference, but you don't need necessarily to have your iPhone on or just around you (scope of arms, for example) for Apple Watch and matched iPhone maintain their Bluetooth connection.

    Your watch can still carry out certain functions when it is not connected to your iPhone, including some that are available when your watch is connected to a known Wi - Fi network.

    More information:

    Use Apple Watch without her sister iPhone - Apple Support

  • firmware for the iPhone bluetooth headset original work with the 5s iPhone

    Hello to our community,

    I have a beautiful original apple iPhone Bluetooth Headset model n °: A1221

    This helmet does not work correctly.

    When I connect the headphones to the computer (iMac 27 "mid-2011, el Capitan 10.11.3) with the original Headset USB travel cable, headset LED is bright orange and the LED color changes to green after a few minutes.

    When I disconnect the headset no lights are bright and the headphones does not work.

    After charging more then 1 hour the same answer.

    When I put the headset with the USB cable connected in my ear, I can hear the sound signal very low volume of pitch high e. When I push and hold the button of the headset tone is stronger.

    When I disconnect the cable, the helmet is instantly dead, no lights, no sound, nothing happens when I push the button on the short headset, for a second, four seconds, 10 seconds or even longer.

    Is there a possibility to reset? A new firmware? An Exchange program? Any help?

    Max

    The helmet has been abandoned, I think that 2009. So, it's long after the warranty. BT headsets have come a long way since then. The Apple headset does support A2DP, now standard. I he write off and buy something current.

  • Apple TV (4G) / 6Plus iPhone / Bluetooth

    I got my new Apple TV (4G) today and was tempted to put in place via iPhone - there is no chance to establish a Bluetooth connection between 2 devices. Both the Apple iPhone TV are on the latest patch. I followed all the advice I could get (no case around the iPhone, the IPhone directly on or under the Apple TV, reset all the network settings on the two systems,...). Apple TV works well with the remote control and iPhone works well with Bluetooth devices.

    Any ideas?

    Thanks in andvance

    What you try to connect?  The ATV4 has no keyboard support, and they have not updated the remote app. The only 'link' between iPhone/iPad and new mountain BIKING is for the initial setup for wifi and iTunes news...

  • Hi my iphone 4S is the display iphone disabled connect to itunes what do I do

    Hello

    My iPhone 4S displays the message iPhone disabled connect to iTunes I have connected to iTunes, but do not know what to then someone can advise please.

    Hello

    Follow the instructions in this article to support > If you forgot the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

  • My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

    My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

    Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

  • iPhone cannot connect to the server to iCloud

    Hello!

    My son IPhone cannot connect to the server iCloud. App Store is not available. In the iTunes and App Store from the settings app, I can't log in. IPhone resetting is not possible. Restore from iTunes on Mac is not possible, because find my iPhone is active on the iPhone, and it cannot be turned off, because in the pane of the application of the iCloud settings can't do anything until I have to accept the new terms and conditions, which cannot be made.

    WiFi on the phone works great with Safari, Mail, but cannot get new e-mail messages. The weather application does not connect.

    His iPad that is connected to the same iCloud account has no problem and there is no problem to connect to his account on iCloud.com.

    I tried to restart and reset hard iPhone and updated to 9.3.4 via iTunes on Mac (which went without pain, but doesn't change anything).

    Any help much appreciated!

    Does anyone have advice at all...? Aside from throwing the thing?

Maybe you are looking for