iPhone Bluetooth Headset open iBooks?

Similar Questions

• firmware for the iPhone bluetooth headset original work with the 5s iPhone

  Hello to our community,

  I have a beautiful original apple iPhone Bluetooth Headset model n °: A1221

  This helmet does not work correctly.

  When I connect the headphones to the computer (iMac 27 "mid-2011, el Capitan 10.11.3) with the original Headset USB travel cable, headset LED is bright orange and the LED color changes to green after a few minutes.

  When I disconnect the headset no lights are bright and the headphones does not work.

  After charging more then 1 hour the same answer.

  When I put the headset with the USB cable connected in my ear, I can hear the sound signal very low volume of pitch high e. When I push and hold the button of the headset tone is stronger.

  When I disconnect the cable, the helmet is instantly dead, no lights, no sound, nothing happens when I push the button on the short headset, for a second, four seconds, 10 seconds or even longer.

  Is there a possibility to reset? A new firmware? An Exchange program? Any help?

  Max

  The helmet has been abandoned, I think that 2009. So, it's long after the warranty. BT headsets have come a long way since then. The Apple headset does support A2DP, now standard. I he write off and buy something current.

• Can't associate my Sennheiser Bluetooth headset with my Verstuurd vanaf mijn IPad Pro and IPhone 5 s

  Can't associate my Sennheiser headset to my Verstuurd vanaf mijn Ipad Pro and my IPhone 5s.

  They ore well on my IPhone 4S and the Ipad 2.

  whatncan deceive you?

  to associate a bluetooth headset device that it has not been paired with before putting the headset in discovery / pairing mode your sennheiser manual should describe how you are going to do

• I'm looking for a bluetooth headset that connects to both my iphone 6 and my air of ipad.  I have a Bose bluetooth connection that does work on my ipad.  Any recommendations?

  Recommendations for a bluetooth headset that works on the iphone 6 and ipad air?

  Most helmets will pair at least 2 sources; Check the manual of your Bose can also. But you must pair it both, and you must manually switch the connection when switching from one to the other. It can only connect to one at a time (this is a BT Protocol limit). I have a headset of parrot Zik that pairs up to 5 sources (I use it with 4).

• Cannot connect iphone 6 JBL j46bt Bluetooth using Bluetooth headsets

  Cannot connect iphone to JBL Bluetooth headset j46bt 6. This morning the iPhone 'seen' the Bluetooth but could not pair. Now, it is not just to find the various. I tried now on the plu button still does not work. Help!

  Just hold the power button longer when you turn on the jbl j46bt helmet, until the led flashes blue and red. After that you should be able to connect to your phone.

• Can I connect the watch or Bluetooth headset at the same time?

  The watch or Bluetooth headset (maybe a pair of the Airpod) connect at the same time?

  I have iPhone 6 now and will update to 7 earlier.

  I do it all the time with my iPhone 6. I assume you mean to plug the headphones into the iPhone, right? Whatever it is, you can connect to the phone or watch.

• How to use a Bluetooth headset to make phone by Apple Watch call?

  My question:

  my iPhone is on the platform to the floor. I'm in the garden, away from my iPhone, outside of the coverage of bluetooth. However, I'm on my WiFi network so my Apple Watch is connected to my iPhone via WiFi.

  I get a phone call on my iPhone at home and my rings Apple Watch on my wrist in the garden. I answer with the watch, but I would like to continue the conversation by using my bluetooth headsets, which are associated with my Apple Watch...

  Is there a way to do this? As far as I can see, bluetooth headsets can be paired with Apple Watch to listen music stored Apple Watch...

  Tnxs.

  Hello

  It is not possible to use a Bluetooth headset that is associated with Apple Watch in order to pass or receive phone calls.

• Pairing Bluetooth headset with Apple Watch 2 series?

  Hoping that someone here has some good ideas, so I can avoid having to go through the centre commercial/Apple Store!

  Bought a watch series 2 the day of the launch, immediately tried to pair with the bluetooth headphoens I got (AvierBTE somethings). No luck. Thought maybe I just got bad headphones - but they always associate with my iphone 6 s. bought a pair of Mswift Pow helmet off Amazon and bluetooth headset at the same time borrowed a friend this pair with its original Apple Watch. My Mswifts, or his headphones will pair with my watch, although the two pair with my iphone.

  My watch IS pair with my amazon echo - so I know the bluetooth works.

  The watch is the headset in discovery mode, but when I try to pair, it gives an error and says it cannot associate, check that the camera is turned on, in range, etc..

  Another person had problems of this kind and has managed to find a solution?

  Hello

  Make sure that you follow the instructions for pairing here:

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

  It can help to turn off pairing your headphones for your iPhone (or any other device that they can already be coupled to) before their pairing at your watch.

  It can also help when you try to pair your headset with your watch, to move the two devices to another place, away from any device Bluetooth can be active.

• IOS error 10 Bluetooth headset

  Hello

  Since I've upgraded to iOS 10 on my iPhone 6, my quick mpow Bluetooth headset does not work as Hey used to. When I turn on, they automatically connect to the iPhone and I get the small icon beside the battery meter indicates the State of charge, however, they do not appear as an audio device in spotify, itunes or other audio applications.

  Only the way to solve it is to "forget the device" and re-pair the helmet - pain in the * when to go to the gym, etc.

  I tried to reset the network settings according to another post on the forum, but there is no reaolve the question.

  Any ideas? She must have iOS 10 as they worked perfectly well until last week and I tried it on my iPod touch 4th generation and they work perfectly.

  Thank you

  I have this problem also with a SoundPeats QY8. I think it's a bug of iOS 10 because he was allowed in the iOS 9.

  In order to obtain the device name displayed for audio playback, one solution is to click on the name of the device under Bluetooth settings after it is already connected, which is a useless chore.

• iPhone bluetooth name 7 incorrect

  Hello. Through background I have recently updated from iPhone to iPhone 6 7. I followed the normal process "full backup using iCloud" copy that whole, including the name of phone (in general/about/name) which initially was "iPhone 6" but I modified manually to "iPhone 7". "

  Today I went to connect to iPhone using bluetooth to attach new 7 and I could not find my iPhone anywhere (even if I could see my iPhone 6 on the list of known devices). After much exploration, I found that despite the iPhone bluetooth 7 screen saying ' now discoverable as iPhone 7 ", its been always seen as the iPhone 6. So, I deleted my old relationships and reconnected to "iPhone 6" (really my iPhone 7) and it worked.

  Am I missing something, or is it a flaw in the operating system that needs fixing?

  I use:

  7 iPhone with iOS 10.0.1

  MacBook Pro 13 "with MacOS 10.11.6 retina

  Thank you

  Joe

  Hello Joe,

  Thank you for asking questions about the name of the device here in Apple Support communities. I am pleased to offer a preview of it and then help you to change the name of the bluetooth connection, so that it matches the new iPhone 7.

  There is nothing wrong, it's just that some areas of the aircraft (such as the name of the phone) will change since you have a new device, because it happens that the information of the current system, as well as the serial number and other information for the personal. That's how he'll distinguish your iPhone backups 7 former iPhone 6 and all other backups device iOS that you bring in iCloud or iTunes. Other areas, such as the name of a device on your Mac, will not access these same areas. If you actually see the name that was saved from the old device in the backup and presented the new device. Fear not though, we can manually change this.

  Please open this help link: change of the name of a Bluetooth device. I'm sure this is the article that you need to change the name of the device on your Mac.

  Thanks again and have a great rest of your day!

• AirPlay only list bluetooth headset after the connection

  Hi all

  I wanted to see if it's just me or other people see this. I use iPhone 5 that I've recently updated to iOS10. In my daily use, I connect headphones bluetooth (4.0), MPOW Swift is the brand, to listen to music or watch YouTube videos. With iOS 9.x I never had a problem with the headphones recognized and used by all applications via AirPlay immediately. With iOS 10, which is not true. They connect as I see the icon in the status bar of the phone and Bluetooth settings section says that it is connected but when I go to music app and click on AirPlay they are not listed. I found to solve the problem, I must forget the device to the headphones and then repair and immediately their names still AirPlay and sound comes from the app through the headphones. This is the best though, if I turn the headset off power (disconnect device), then reconnect, I'm back to the same problem where they do not appear in the AirPlay and I pairing again.

  Anyone else see this problem? Unfortunately, I don't have another bluetooth headset to test this.

  Thank you!
  Jeff

  I'm having the same issue. It happens with all my Bluetooth devices. The Bluetooth is connected, as indicated by the icon in the status bar, and the said device. But music, iHeartRadio etc. play via speaker phone. Curiously, the phone works via Bluetooth and the active key Siri is not a problem of Bluetooth.

  I did some research and tried to reset my network settings as recommended without result. Now whenever I turn in a Bluetooth device, I have to connect manually if I want to use it for anything other than the functions of the phone. Very annoying.

  Apple, any suggestions?

• Notification by email to the phone and not headset/Bluetooth Headset

  I have an iPhone6 and whenever my bluetooth headset is connected, my notifications by e-mail through the headset and not via the phone.  I need to call to keep giving me the notification and send it through the headset.  Often, I have my phone and the headset on my desk and will not hear the notification.  I'm pretty sure I could change this once, but can't remember how.

  Maybe you have active AirPlay? Swipe up from the bottom of the screen to display the command center and ensure AirPlay is disabled.

  How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support

  Also, go to settings > general > accessibility > routing of Audio calls > and set it to automatic.

• Why won't work on Satellite A105-S4284 Bluetooth headset

  My Logitech SH03 V04 bluetooth headset does not work with my computer (I'm using it with Skype).
  This small icon appears at the bottom right of my screen and when I click on it, the device appears on the list of devices, but no service unit are.

  When I open the network connections, the bluetooth connection is considered to be disconnected.
  What can I do?

  Try to start Bluetooth settings in the program folder "Start > (Toshiba) > Bluetooth > Bluetooth settings.

• Bluetooth headset does not appear in the control panel

  I try to use my bluetooth headset.  It is paired with success and it seems in the window bluetooth devices.  However, it will not work.  I looked in the sound control panel and the helmet does not appear.  This use to work, but stopped.  How do I add the bluetooth headset icon in the sound control panel so I can choose it as audio device by default?  I uninstalled and reinstalled the device several times.  I also have a bluetooth mouse and it works fine.  There is no other bluetooth devices.  I use Windows 7.

  Thank you

  Hello

  I suggest you to update the driver for your Bluetooth device.

  Method 1:

  I suggest you go through the steps and check:

  (a) Control Panel

  (b) sound > manage Audio devices

  (c) set by default

  See also:

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Method 2:

  Step 1:

  To change the audio device by default:

  (a) click the Start button

  (b) type 'Change sound card settings' or ' manage audio devices'.

  (c) click the link with the same name.

  Step 2:

  An alternative is:

  (a) right click on the sound icon in the Notification area

  (b) select "Playback devices"

  (c) a new window called Sound, opens.

  (d) in this window, you will often see the audio devices for playback, which are currently present in Windows 7.

  (e) select the device you want to set as the default value and

  f key) click on the default value .

  (g) click on OK to save the current configuration.

  NOTE: the default selected device will be used by all of your programs unless otherwise stated.

  Set Default has two options: Default Communication device that manages all communications like the calls or videoconferencing on IM or VOIP, and default device that manages all the output is without the communication part.

  To choose the device that should be the default value for the communication and device that should make the rest of the book,

  Method 3:

  (a) click on the small arrow button set as default.

  (b) If you click it, the arrow will show you both options.

  (c) Select the communications device.

  (d) click on set as default -> default Communication device.

  (e) select the device for all other types of reading and

  f) click set default-> default device

  (g) If you want the device of Communication by default and the default unit will be defined on the same audio device just click on the button set by default instead.

  Reference:

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

• Peripheral Bluetooth disconnects when "Bluetooth Headset operations and settings" window is closed

  So when I connect my Bluetooth headset to my laptop I have at the same time press the 'connect' button on my headset * and * open the Bluetooth Headset operations and settings window, then click on 'Connect' on there also.

  So my first question is:

  Why do I have to do a step totally superfluous alone time I want to connect my headset? It should be the case that once I've set up my headset with my laptop, it will automatically connect when I press the 'connect' button on my helmet. I wouldn't do more than that.

  My second question is:

  Why my headphones does not cut off when I close the Bluetooth Headset operations and settings window?

  It's the same problem that this guy has been seen two years ago:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Plantronics-M100-Bluetooth-headset-disconnects/a79abcf5-2f26-4240-A808-2d2042fe4e01

  Feature: Armel BSH10 Bluetooth stereo headset.

  Hello Teedjay,

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Going to Headset/Bluetooth Headset before working on this computer?
  2. Have you tried another Bluetooth device on this computer? Has been the result even?
  3. Have you tried the steps suggested in the thread you mentioned in your post? If yes what was the result and that do not try these measures after the method 1.

  Try the methods below and see if it works for you.

  Method 1:

  Run the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  
  Method 2:

  If the problem persists, try to refer to the procedure described in the following Microsoft article and see if it helps.

   

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

   

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.