iPhone displays the incorrect password

Similar Questions

• can not restore again peripheral iPhone, get the incorrect password

  I just upgraded the iPhone 5 s 6 s.  Run backup on my MacBook first.  every tie I try to restore it, I get an incorrect password error.

  Which version of iOS was running on your 5 s? Also, on which device is the message "incorrect password" that appear? If your 5s was running an older version of iOS, you may not be able to restore on your 6s. If you still have children 5 years old and he is not on the latest version of the software, (iOS 9.2), then make sure that you have on that and do a backup then. If this is the problem, then you should have your 6s facing up and running without delay.

• "I bought a new laptop which has a 60 day trial of microsoft office on this subject, I also bought a copy of ' microsoft office and Student 2007 ' however it displays the incorrect product key when I type in the product key on the box of cdrom.

  "I bought a new laptop which has a 60 day trial of microsoft office on this subject, I also bought a copy of ' microsoft office and Student 2007 ' however it displays the incorrect product key when I type in the product key on the box of cdrom.

  Uninstall the trial version, and then install the CD-ROM version.

• Error barsigner, cskpin, csjpass, cskpass PlayBook: load keystore: store the incorrect password

  I can't try to decode whats required in the process of signing, I have instilled by 3 certificates and just got another one comes along, I'm very careful when you use my last chance to sign the application.

  I get through all the steps correctly but now get the following error: error barsigner: load keystore: store the incorrect password

  To begin, I would like to understand what are the passwords:

  in blackberry-keytool-genkeypair whats a storepass - is the single password that secures the p12 file?

  blackberry-signatory whats a -cskpass - is that a password what should I do?

  in whats blackerry - sign a -csjpin - is it the PIN that you used to create the certificate in the first place?

  signatory of blackberry, the example is as follows:

  BlackBerry-sign - to register - csjpin - cskpin

  I guess there should be a space between and

  So: blackberry - sign in - register - csjpin 123 cskpin - 456 c:\path\to\certificate.csj

  I went through the process of full signature with no problems, but when I run bbwp I get the following error:

  barsigner error: load keystore: store the incorrect password

  What is the cskpassword? My cskpassword, cskpin, csjpin are all identical all the way through the process, it is possible that by doing: mypassword - cskpassword that there is a space of start or end at a certain time?

  OK, first of all... chiiiiiiiilllllll. It's a coincidence, I just saw it and you can't expect people to be here all the time (with the exception of those who work for RIM/Adobe), and from what I've seen, this forum is - compared to the BONE of the Tablet for Air - very slow

  First of all:

  Here is a detailed description of what to do: link

  Inauguration: What you need is the following: a .csj- file. You must register for this on a blackberry Web page, and more importantly, don't forget the name of your company and the pin code, you give them (lowercase + numbers 6-10). It's the SJC pins or csj-let-go

  Thirdly, on your local computer, you create a file-csk.

  blackberry-signer -csksetup -cskpass 
  

  Do not forget this password, because you csk-pass

  4th:

  You need because in

  blackberry-signer -register -csjpin      -cskpass  
  

  You register with this tool-signatory in the keystore-Center of BB in canada. They have created the csj, so the csj-pin and know when you register yourself, you have. To validate this to the next step, you give them your pass csk

  5th:

  blackberry-keytool -genkeypair -keystore       -storepass  -dname "cn=" -alias author
  

  You must now create a key file. That's now independent of the SJC/KSB. What is important is that the name of the company coincides with the that you used to cretate the csj-file

  Carried OUT PREPARATION. This must be done only once, even if you create several apps

  6th

  Now you can get your signatures in your application. First the signing of BB

  blackberry-signer -verbose -cskpass      -keystore  -storepass      RDK
  

  BB (Server RDK) will sign all of your files. There are more possible problems, see the first link

  7

  Now your own signature

  blackberry-signer -keystore  -storepass      author
  

  Fact.

  8th

  Download the signed version

  If you have issues with filepaths, move your .csj and your .p12 on the desk and do it from there. Second, you do not use bbwp to sign. only the blackberry tool - sign

  I'm on the Air-forum btw. A kudo would not hurt

• Window residential group doesn't gives me the ability to display the homegroup password. I have

  Window residential group doesn't gives me the ability to display the homegroup password.  I cannot join the homegroup on my PC to change the password.  What can I do here?

  Thank you.

  You must display the password on a computer that is already joined.

• Password Manager does not display the saved passwords / sites

  For some reason, Firefox has saved the password for a site that I REALLY don't want to be saved (I of course said not to). So, I decided to remove it! pretty simple right? evil. When I go to security options and click on the saved passwords, I don't see anything. When I type in the name of the site, I don't see anything. What, there is no password stored in Firefox? I don't think so. How can I fix it?

  Open your history Manager or bookmarks. Use the search box to
  find this site. Right-click and select forget this Site.

• Cannot display the homegroup password

  Original title: "the homegroup password.

  I'm trying to connect our computers in the same residential group, but on the main computer, I can't see the password when I go to the right page to view and print password it says windows can not let me change the password or remove this computer in homegroup.  How can I get the password I can't understand it.

  Hello

  Maybe this can help, http://windows.microsoft.com/en-US/windows7/HomeGroup-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/change-a-HomeGroup-password

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• No fix for the iPhone 6 WIFI "incorrect password" error?

  Was started shortly after the iOS Update 9. We have several customers experiencing the same problem with iPhones and iPads.

  

  Yes, we have been meticulously enter the password. We are aware that it is case-sensitive.

  Apparently, there is some sort of strange intermittent problem. My child MX5X2LL/A 6 IPhone will connect to WIFI for a week or two, and then completely to 'forget' the passwords to each wireless network unique, that it is never connected to any notification and without any warning. Then, a week or two later, miraculously connect wireless once more. This weird bug is driving us bananas - especially with all the data overages. It all seemed begins at the time of upgrade to iOS 9. Here's what we've done since September:

  • upgrade to iOS 9.1 and later 9.1 updates

  • Re-set to update to iOS 9.3.1

  • clear and reset the network settings at least 12 times

  • clear and reset the entire phone three times

  • Reset all wireless routers, change the SSID, changed passwords

  A few things that do not seem to give us at least some sort of progress, but still unacceptable:

  • people with disabilities find my iphone - connected to WIFI immediately, then he lost again a week later

  • connected to the public WIFI hotspot by Bright House, but not through WIFI interface type

  • connected to two 5G wireless networks, even if it would not connect to 2 same G network with same or different passwords

  The signal strength is great in the world. I checked all the obvious and not so obvious stuff. Running a password access point is dangerous and not an option. It is not heat, because in this case from a cold start. The only thing I can find is a difference of firmware in the authentication in the WIFI chip used on the sellers of MX5X2LL / a. are swapped mid-year model in all mobile phones, computers and tablets and is usually transparent, so there may be a problem specific to the provider, Apple is not aware of.

  Apple support has been useless and unfortunately pompous as usual, declining several times there is a problem and asking I have send my phone to paying off-warranty service or a replacement, which is NOT a solution, thank you. There are at least hundreds if not thousands of people posting here who have EXACTLY the SAME PROBLEM. My last post was removed because some Apple genius assumed somehow it's funny business going on, but I can assure you and to prove it has NOT NEVER been hacked, cracked, unlocked or jailbroken, whatever that means. Maybe they have a mandate to delete messages that indicate their equipment cannot 'some work '.

  < published by host >

  No problem on other networks that are managed professionally?

• When I go to the field in 2008 r2 error ID and the incorrect password for remote

  When I take my 2008 domain to distance his username from the list and the password is password and username incorrect but even work in direct server.

  People Server lying around in the TechNet forums, you might better wander
  there and post this question for a better response.

  http://social.technet.Microsoft.com/forums/en-us/categories

• iPhone 5 s incorrect password, but this is not

  My emails are not being sent on my phone, but they are on my windows computer.  I confirmed the password on the two parameters to icloud and msn.  I forgot my security questions and was therefore blocked to enter my apple id page.  So frustrated.

  Hi, go there If you forgot your Apple ID - Apple Support security questions answered

• Reactive projects displayed the incorrect content due to the orientation of the tablet.

  In a sensitive project, how Captivate to determine which view should display on the type of device? For example, should I use pixels in width or device type?

  We had problems of design for tablets because when the Tablet is held in a landscape position, the main display is shown. When the device is held in portrait position, the Tablet is displayed. Because some tablets are higher resolution than desktop computers, how do we ensure that the view of the Tablet is displayed regardless of the orientation of the Tablet?

  This is by design: landscape on tablets show see first breakpoint, Portrait shows the tablet display.

  It is not the resolution of the Tablet, but the browser which is important. You can find them on viewportsizes.com. You will see that, although many smartphones have very high resolution, browser resolution is very low.

• HP Pavilion 15 t-bc000: warranty Checker displays the incorrect Date of expiry

  I bought a new Pavilion laptop and received on Monday (September 12, 2016). When I customized it I chose
  HP 3 years against accidental damage with 3 days on-site Pavilion Notebook Service to go with it. Monday in the end, I noticed that HP has only 1 year what guaranteed manufacturer attached to it. I made MANY phone calls between yesterday and today, and no one is fixing the issue. they stop of me yesterday that the problem is solved and I would see that he fixed on the Web site "in a few hours. It was suspiciously afternoon when I was told this. I waited at least 5 hours to check out the website and it always says that I have a 1 year manufacturer warranty. Then I checked again today, and he said even 1 year manufacturer warranty.

  If you look at my order details it says that product number is ABC (edited for security reasons). If you press fn + ESC or look down the system there say the number of product is XYZ (edited for security reasons). It has the serial number for the TWO serial numbers. I don't know if that's the issue or what. I need this problem in case I need it, and it seems that nobody knows how.

  HP Pavilion 15 t-bc000 CTO Notebook PC (ENERGY STAR) (Windows 10 Professional) /HP ENVY TouchSmart m7-j020dx Notebook PC (ENERGY STAR) (Windows 8.1)

  After many phone calls and 2 hours later, I got my landline number

• My account has been blocked because someone compromising my account by sending all kinds of spam/spam or enter the incorrect password, put false data.

  My account has been blocked due to someone compromising my account by sending all kinds of spam/junk mail. I don't use the account a lot and it's been long that I was there. When you cannot remember the subjects of the emails you sent because of the delay and can identify the files that you put in place and they will always say that you can't be identified because "we are unable to validate your identity.

  I don't use a lot of electronic mail, but I stored critical data in folders that I need for SEO work and home, as well as historical data I have not otherwise recorded on a disk or in hard copy. (lesson learned the hard way with backup)

  When I try to do a reset, claim, that I did not provide enough data to confirm my ID is there a direct way or the person who can be contacted for help with this?

  As a senior, my computer skills are not strong and I never thoufgt anything like this in advance. So I need to know more abou this reconstruction process which can help me to get into the escrow account.

  Hi bennienobles,

  If you are referring to a Hotmail account, your quetsion would be better suited in the Center of Windows Live Help solutions. Please visit this link to find a community that will provide the support you want.

  Thank you!

• IPhone 6 does not display the caller of time during the call

  Hi, when I get a call or call someone, my Iphone displays the call only. How can I change to decide the call times?

  Hello ghtung,

  Thank you for using communities Support from Apple. I know that seeing not only the timer for the duration of the phone call on your iPhone, it's not what you expect. Because this is not the expected behavior of the iPhone software, I recommend the following steps to troubleshoot and resolve this problem:

  First, restart the device as the closing down and starting process is important to keep the iOS software works correctly. Then test again the question:

  Restart your iPhone, iPad or iPod touch

  If you are still missing the call timer after reboot, your next step would be to make a backup of your personal data and then reset the setting on your iPhone. Now, don't worry, this will not affect your content. All your contacts, photos, music and other stuff are all safe. What it will do is give your custom to the factory default settings. Background, images, sounds, fingerprints and stuff like that will be set up again. Then test the issue again.

  The backup of your iPhone, iPad and iPod touch
  Import photos and videos from your iPhone, iPad or iPod touch
  Reset the settings of the iPhone - iPhone user Guide

  See you soon!

• homegroup does not display the password

  I created a homegroup on laptop windows 7 of my wife. Trying to get the homegroup password to view, I hit "View or print the homegroup password" and nothing happens.

  My computer, a laptop another W7, it shows that his computer has set up a homegroup, but I can't get the password to continue the installation process.

  How can I get the password?

  Additional notes:
  1, are both services Homegroup/manual start on both machines.
  2. I tried to "Leave the homegroup" on his machine to start over, but get the message "Windows could not remove your computer from homegroup - why?

  Thank you
  Jack

  Saturday, August 23, 2014

  I know this is an old post, but I had the same frustrating problem... OS = Windows 7 x 64 Home Premium SP1, all latest patches, blah blah :)

  The answers above are excellent, they give the bread crumbs on what to do to fix it.

  There are 2 other URLs from the Microsoft Forums that refer to the issue as well:

  http://social.technet.Microsoft.com/forums/Windows/en-us/6b5a72eb-6523-4af9-85AB-3694d7cc457a/peer-name-resolution-protocol-will-not-start?Forum=w7itpronetworking

  and

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-could-not-start-the-peer-name-resolution/c50b8931-7c59-E011-8dfc-68b599b31bf5

  What I saw was of 3 services for peer-to-peer service

  Start, run, services.msc hit enter

  Peer Name Resolution Protocol (not started)

  Peer Networking Grouping (not started)

  Peer Networking Identity Manager (on the road)

  When I try to start the services of 2 albums, error that appears is referenced in the URL 2 above,

  "Windows could not start the Peer Name Resolution Protocol service on Local computer.

  Error 0 x 80630801: 0 x 80630801

  Reboot PC makes no difference

  Internet Explorer is the default browser

  Running host group only confirmed Troubleshooter Service of Peer to Peer Networking has been watered

  Problems running made no difference in the resolution of problem

  Reset TCP/IP makes no difference, via the elevated cmd prompt and reboot

  http://support.Microsoft.com/kb/299357/en-us

  Navigate to the following location:

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking

  Delete the following file: idstore

  Restart the machine/PC

  After the reboot, all 3 services are started and I can now display the homegroup password

  Control Panel, network and sharing Center, choose homegroup and sharing options, under other homegroup actions, view or print the homegroup password

  Update:

  After re reading the messages/replies above, Henrik_Karlsen_01 referenced the below URL that contains the fix as well...

  http://Windows.Microsoft.com/en-GB/Windows7/why-can-t-i-join-a-HomeGroup