IPhone does not accept the code to check for text messages

Similar Questions

• Play Google store does not accept the ADF Mobile apps for tablets

  My ADF Mobile app is published on the Google game, but he says that the app is not compatible with the tablets, for the following reasons:

  1. properly target the Android Versions

  I fixed this by going into the properties of the Application > deployment > Android profile > edit > Options Android > change target SDK API level from 9 to 14.

  Note to the ADF Mobile Team: I recommend that you change the default target SDK API level from 9 to a higher level (Google recommends 14 today).

  2. correctly report physical dependencies

  I understand the problem, but I need help to find a good solution.

  The problem is, when ADF Mobile deploys on the package, it creates an AndroidManifest.xml file and since my application uses SMS, it necessarily adds a < permission > element for telephony.  In general, approval will be "implies" that phone is a "requirement of functionality of the material" unless we also add an element of <>uses feature corresponding with android: required = "false".  However, ADF Mobile not set the < uses > function in the AndroidManifest.xml.

  Does anyone know a good solution for this?  (I searched for a way to configure this in ADF Mobile and in the docs, but it found nothing. "And I can't manually change the AndroidManifest.xml because ADF Mobile it creates in the middle of the deployment process).

  3. take advantage of the extra screen available on shelf area

  I have no start troubleshooting this in detail yet, but I'm curious to know how the Google game store, determines exactly?

  Anyway, if anyone can help me with #2, I would be grateful.  Thank you!

  Patrick

  Edit: Title changed this message, because I believe it is a more serious current problem.  Will respond with more information soon.

  Hi, Patrick, recently Google game made a number of changes, so it is much stricter in terms of supported Android.  Successfully, we applied workarounds and found the combination that seems to work for Google play.  Here are the details based on your questions:

  (1) the level of the API should not matter as long as it's 9 or above - 9 is the current default value.  Nothing specific in ADF Mobile that requires the level more high API.  However, if you are interested you should limit your application to 4.x devices, you can set the minimum and target API level accordingly to assert that.

  (2) by default, ADF Mobile says all the permissions of the device which may potentially be required by the framework.  This is why, for example, even if the application accesses a camera, the AndroidManifest.xml file will still contain references to the permissions of the camera.  Possibility to choose the correct hardware permissions selectively is planned for the next version of Mobile of the ADF.  In the meantime, you can change the AndroidManifest.xml file template in an extension of the ADF Mobile as the workaround.

  (3) Google game uses the element of "Supports the screen" in the file AndroidManifest.xml to determine what factors shape/devices are supported.  Summary of form factors supported and densities are described here: supporting multiple screens | Android developers.  ADF Mobile supports the display of different density already.  In what concerns the size of the screen, you must add the element "supports the screen" in the model of manifest file xml for the size of the screen that you want to support.  For example, if you want to add in support of all devices:

  Android: normalScreens = 'true '.

  Android: largeScreens = "true".

  Android: xlargeScreens = "true" / >

  The Android site would give you definitions of what mean these sizes.

  Finally, here are the instructions on changing the template AndroidManifest.xml:

  -Access file /JDeveloper/JDev/Extensions/oracle.adf.mobile/Android/Oracle_ADFmf_Framework.zip

  -Make a backup copy of the zip file

  -Unzip the file, which would be to extract all files in a directory of 'framework '.

  -Navigate to the framework/template/AndroidManifest.template.xml file

  -Use a text editor to change the permissions of the device, as well as the addition of the screen element supports as indicated above.

  -Zip up the framework directory and name the file zip as Oracle_ADFmf_Framework.zip, replacing the old.  Please make sure that the zip file has the same directory structure exactly as before.

  -In JDeveloper, before you deploy the application, please do a "Clean All" to clean up all the old objects deployment.

  -Deploy the application - the application should now be visible for tablets, as well as with adequate permissions.

  -Download the application on Google game - no further action is necessary in the game of Google around form factors supported and the permissions of the device.

  Now the Android deployment process does not additional validation for the device permissions are actually necessary, therefore, to ensure that these are properly defined.

  I'll also cross post this on the blog of the ADF Mobile team.

  Thank you

  Joe Huang

• Connecting laptop wireless card which does not accept the 16-character passphrase for WRT 54 G Linksys

  Under Win XP (without service pack), WPA Personal.  Two other computers connect correctly. On an old laptop on Win XP network card can see the router but when I enter the correct password (16 characters) I get a message saying that the code must be 13 characters.  How can we plug this computer without turning off other wireless devices two running through the router?

  It turns out that the update of Win xp service packs 2 and 3 original solved the problem.

• update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  Hey lasdj,

  Thanks for posting in the Microsoft answers site!

  If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.

  To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.

  Therefore, remove the compression of the DATA directory and run together to the top again.

  Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.

  See the links below for more details:
  
  Windows Update error 6d9e
  http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9E 

  Install SQL Server 2005 and 2008 failures (compressed DATA directory)
  http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspx

  I hope this helps!
  Gokul T - Microsoft Support

• the new Win7 disc replacement does not accept the case key

  Our dv6 - 2173cl end is more the boot, the "freeze" while showing the wallpaper with the taskbar 'framework' as well as the Start button, the HP logo button and the Date/time.  Defective hard drives the check HP tools with 90772-50e656-xd0021(7? wrote down in a bit of a hurry, sorry)-6ou103 error code.  Since the reader would also not 'take' the restoration attepmts (so the HP tools) we thought that a new disc has been a given.  Fast forward...  Now with the new drive in and a new Win7 install (no recovery disk, yes we know) the facility does not accept the key from the sticker on the bottom of the case and Yes Win7 is Home Premium on old and new.  So now, what do we do to get active Windows?

  I found that if you enter the key during installation and enter the key during activation of this always accepts it. Always works for me when I do a clean install of Windows 7 on client computers.

• MS Office does not accept the product key and does not leave my type anything on Word documents

  I have windows 2007 edition vista Home premium and I neglected to enter my product key every time I opened a word document. I discovered that after 25 hours of opening ms Office it will not let type you anything on the document. I entered the 25-digit product key, that she had asked because I found on the label on the back of my lap top and every time I entered the code, he said that it was not valid. I double checked to make sure that I typed the numbers in the right order several times and it still does not accept it! I'm in the product key? I also tried the product ID and that no longer works. Help, please! Thank you!

  • Home Premium Windows Vista 2007
  • MS Word does not accept the product key
  • When you open MS Word, impossible to type anything

  You enter the incorrect product key. The product key on the back of your laptop is for the Vista operating system, no office. The office, which is preinstalled on your computer has a trial version. You can buy Office in order to continue using it. Then, you will get the Office product key.

  FAQ on MS Office trial versions - http://buy20.trymicrosoftoffice.com/buyus/faq.aspx?culture=en-US
  How to determine if you have an evaluation of a program or a suite edition Office 2007 installed - http://support.microsoft.com/kb/927920/en-us
  How to convert a trial version of a program or suite Office 2007 to a full retail perpetual license version - http://support.microsoft.com/kb/927756/en-us
  MS - MVP - Elephant Boy computers - don't panic!

• Windows 8 does not accept the product key

  About 3 years ago I bought Windows 8 Pro (64-bit). In the meantime, I reinstalled the system a good several times because of some strange accidents (see my other question). Now, I tried to reinstall it again, until Windows 10 comes out, but activation does not accept the key. I read on other forums that this is probably beyond the limit of activations.

  Is there a way to reset the key or am I forced to buy a second?

  Thank you

  Mario

  Hello Mario,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you made any hardware or software changes to the Surface before the show?
  2. do you receive a code or a message when you say, 'activation does not accept the key?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because corrupt Windows activation files or parameters.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  To activate the phone and check.
  Refer to this article:
  Get help from Microsoft Windows activation
  https://support.Microsoft.com/en-us/KB/950929

  If this does not help, use method 2.

  Method 2:
  Please refer to the suggestions of nobody611 responded on 4 December 2012 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-activation-after-clean-install-does-not/01047349-516A-485f-b88d-68c1c9ac0e9c

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Flight Simulator FS9.cfg file does not accept the changes

  I am running Msft FltSim2004 under Windows 7 Professional. I had to make additions to the FS9.cfg file (it takes changes in txt in Notepad). It is a hidden file located in C:\Users\{my name} \AppData\Roaming\Microsoft\FS9. After that I have to make the changes and close the file, and restart FltSim, I still get the error that the change was supposed to eliminate FltSim. When I check FS9.cfg, the change I've made is no longer there.

  I changed all the c:\ folder permissions down to FS9, as well as the permissions in the FS9.cfg file. But it still does not accept the changes. Everything else works fine under Win7. Any suggestions? Thanks in advance for your help.

  Art

  Art,
  Try to copy the file to your desktop (or another folder), and then delete one located in the FS9 folder.  Make the changes to the copied file and simply save it to the new location.  Reopen the case to check the changes remained, and then copy it in the FS9 folder and test.  Let us know the results.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html

• Security updates have blocked incoming messages in Windows Mail - security popup does not accept the password, error number: 0x800CCC92

  Original title: updates blocked mail in Windows Mail - security popup does not accept the password

  Hello - three updates installed security today (KB2691442, 2718523, 2596744).

  Now Windows mail will no longer accept mail entering into my pop3 account.  Security pop - up demand for a/c of the user and the password - I've checked tools > accounts > properties, reset the password, but it does not accept pop-up.  Here is the error message:

  .... POP3, server response: '-ERR [AUTH] username and password not accepted.', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Help please! John

  Hello

   
  See the steps in the links.
  Troubleshoot Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Windows Mail: Setting up an account of end-to-end

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  Hope the information is useful.

• Reinstalling an OEM of Windows XP version and it does not accept the PK

  Reinstalling an OEM version of Windows XP, but it does not accept the PK and no hardware changes were made.

  Check the letters and numbers carefully, do not confuse the letter B for number 8, letter O for the number 0, letter Q for the letter O.

  If it does not then help following XP forum post: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install?page=1&tab=all

  J W Stuart: http://www.pagestart.com

• remote device does not accept the connection___

  Windows 7 does not accept the connection for my site, but Xp will be, what is different about 7?

  Hello alanep,

  ·         Could you please tell us what is the remote device you are trying to access?

  ·         What version of Windows 7 is installed on your computer?

  ·         You try to connect to a remote device with Internet Explorer?

  ·         What happens when you try to connect to the remote device, you get errors?

  You can check if you have the same behavior in mode no. Add-on.

  1. click on tools on the toolbar Internet Explorer and then click on Manage Add-ons.

  2. click the name of the add-on at the top of the list of the toolbars and Extensions, and then click on disable.

  3. click on close and then test Internet Explorer.

  4. If the problem persists, open Manage Add-ons, enable the add-on that you disabled in step 2 and repeat the steps 1 to 3 for the next add-on in the list toolbars and Extensions.

  5. Repeat steps 1 through 3 until the problem is resolved or until all modules have been tested.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• OfficeJet Pro 8500 does not accept the new cartridge

  My OfficeJet Pro 8500 has 910g does not accept the new magenta cartridge. It displays replace following used cartridge in the order of printing continues (translated from Swedish). I've done various resets and now to restore the alos an OOB (out of the box), does not help. My weighs 40g 940XL cartridge so I know what it it not empty. I have read a lot about the problems of cartridge maggenta but found no solution. The printer is fine, but this problem is driving me crazy! I have always recommended HP printers and have owned quite a few over the years,

  No problem, I understand.

  I think that could happen is that the oval pin mechanism comes into contact with food has become defective over time. Its supposed to sink to bottom when feeding is complete (on inserting). Over time as the ink level runs the mechanism will expand gradually until you reach full extension on what an ink level alert is triggered. What might happen in your case, is that the mechanism is not entirely depressing even when the new full provision is inserted. This would explain why to apply the tape inside the oval window on the supply allows the new offer be detected. Unfortunately, the fix for this would be to have the machine. If you think it's something you want to do here is a link where you can check the warranty status of the printer and based on this status, you will be presented with relevant options

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&DLC=en&docName=c01321436&LC=en&product=4116838

  With regard to the branch point the device directly into the wall socket, sometimes for some questions (usually power up/on) the resolution can be plug directly into the wall in the routing through a power bar or surge protector can induce weak variations of the voltage applied to the unit. However, this should not be a factor in the problem you are experiencing, so there should not be any need for you to change your current configuration.

  More sorry that you are having a problem with ink level detection on your device. Please post back with other questions.

  Best.

• I can't update to of things - like iTunes, flashplayer or any error games resource or the remote device does not accept the connection

  Hi as I said in the title, whenever I have troubleshoot my connection says the remote device or resource does not accept the connection. I have a race a portable CAREB on windows 7. I can internet eyebrows and watch videos online and things like that, but I can't update things like iTunes, flashplayer or any what games that I run on my laptop. everytime I try I get a message of program control connection what ever I am updating. I checked the other computers in my house and they are all very well, as well as in home game consoles have no problem connecting to the internet and update. someone help me please

  Original title: Troubleshooting my my wireless conecction and it say the remote device or resource does not accept the connection

  Hello

  Thanks for posting in the Microsoft Community. This problem can occur because of incorrect settings of Internet Explorer. Initially, make sure you have Internet Explorer as web browser by default on the computer, refer to this link: http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7

  Research I found that this problem can be solved by resetting the Internet Explorer settings. Try the following steps:

  1. Press the logo Windows + R to open the Run dialog box.

  2. Type inetcpl.cpl in the Run dialog box, press enter.

  3. Now click on the Advanced tab , and then click reset.

  4. Click apply , then ok.

   

  Note: Resetting Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  Please refer to this same thread http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connection-problem-troubleshooting-the-remote/24bfdbf3-4914-45a8-ae45-38243b59be1c?page=1, he is older but he helped a lot of users.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• the remote device or resource does not accept the connection - CIMC

  Hello

  I tried access MMIC remotely via web browser, but get the error message "the connection was refused by the target device.

  I was able to access a device similar to the same place but will not be for this particular device.

  Another diagnosis with internet explore came with reason "the remote device or resource does not accept the connection.

  Any idea please?

  Thank you

  Hi Mike,.

  Is the host this time online? Are you able to ping the server MMIC? If you are able to ping the server of CIMC, but unable to connect via SSH or the graphical user interface you can hit the following bug;

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCun88303/?reffering_site...

  I hope this helps. Please check all the useful answers as correct while others can find answers faster.

  Qiese Sa'di