iPhone does not connect to EA6500 2.4 GHz
I put it up as Capri (2.4 GHz) and CapriHD (5 GHz). CapriHD has been provided only for HD video traffic. IPhone 4S my wife can only use 2.4 GHz, and he left suddenly after 1-2 months of use. My iphone 5 may use either the band and it can connect only on 5 GHz. This problem COULD correspond to the recent update of the firmware? So I traveled a lot around this time can not be sure that it is a culprit.
Really thought that the problem was the material, so I replaced it with a new EA6500 and get the same result.
I suspect that the problem could be environmental. Maybe the neighbor something interfering, but I don't you assignment of channel info as we did in the past with older routers, so don't know how to go about trying other things here.
I found that, by limiting the width and assigning hard channel 11 that our iPhones can now connect 2.4 GHz. Apparently, something installed neighbors again, and the function of channel AUTO assign the router cannot resolve this conflict.
Tags: Linksys Routers
My UK 6s iPhone does not connect to the network in Germany?
'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?
I have recently taken delivery of a VW Tiguan MkII 2016 and could easily match my 6 s iPhone with it. Now, however, I created CarPlay Apple and VW car-net connect my iPhone via USB. Now my iPhone is no longer connect via bluetooth when not plugged into the USB port. It seems that I can now use only my phone by CarPlay which I do not plan to use whenever I drive the car. Is there a solution to this?
I understand that as you have activated the Carplay, your iPhone will not connect to your car stereo via bluetooth. You can try to disable the Carplay on the device, and then test the bluetooth connection. Because you are trying to connect via clips and wireless at the same time, this can cause some problems. Using one or the other should solve this problem.
Please use the Apple Support communities to post your question. Good day.
I have a 6 s iPhone and an iPad and a macbook pro. All my devices are visible if I login to iCloud on the Mac, but find my iPhone app does not work on the iPad or the iPhone. Devices are listed, but cannot be found. I am connected to iCloud on all devices, all with the same ID find that my iPhone is running for all devices. Location services are on. This problem occurs on the wifi and cell phone, and no matter what router, I connect with. Can anyone help?
Could you post a screenshot of the app, both on your iPhone / iPad?
Hello I bought a new Airport Extreme the other day and I'm having trouble linking my two iphones to her. My MBP connects no problem.
My internet allows a connection at a time, but can I use a router and wifi to share my connection. That said, Ive set up my wifi connection and reset the router probably 15 times now. My MBP connects every time without any problem. My previous router belkin had no problem doing that, but unfortunately, it took a shit.
My iPhone will not be connected. I try to connect them - 5s - iOS9 Iphone and 6-iOS8 and all two will be connect and send me to the login screen of my ISP. My previous router has never done this, and others with apple routers here have the same problem. Don't know what I can do, they simply will not connect to wifi and will stay on.
Ive set up my router on my MBP, configure my router on my iphone (iphone yet never will connect), tried different network names, closed in Bridge mode, reset all the network settings in the iphones, I forgot network and tried to join. Ive reset the router several times already. Ive spent about 4 hours of searching and trying different settings and options, but has zero chance.
Ive also added my iphones mac address to the router and allows connections all day and no luck. I also tried the two parameters of frequency for two and no luck. Im not sure what remains to be done.
Hi - my iPhone 6 s connected perfectly with my mac through iTunes and load. So I think I've hit the setting do not trust and now it won't connect.
* cable and iMac load ports work fine
the iPhone through a Plug and my MacBook Air costs
* In parameters (sync iTunes) it says the iMac is not available
* I have fed at the same time and restarted with the connected phone or not plugged
* I tried to reset all settings - nothing
* I tried to reset the network settings - it asked me if I wanted to trust the computer, he briefly loaded and then stopped.
What I can do.
Thanks in advance
Connect via USB? If this is not the case, do.
For the past few weeks, I noticed a strage problem. 6 Skype iphone app connects not when the phone is connected to the wireless network. As soon as I disable the wi - fi and move to 3G (or 4G) the application connects.
It's really strange. I tried at various locations of a WiFi connection (thinking that it must be something to do with my home wi - fi router).
There is no problem on Mac or PC connection. Not even on a samsung (android) phone. It's just iphone 6 that creates it.
Finally a Solution (after discussing with a helpful and patient person on Skype Chat support)
- First disconnect all devices connected (physically if possible)
- Connection of your iPhone on the network 3G / 4G (the one that connects)
- Select any contact and type /showplaces - this will show you all the places that you are connected
- type /remotelogout if you see more than one end point (one of the endpoint will be your iphone or phone)
- (Continue to do 3) and 4) until you see a single point endpoint
- Now, quit Skype on your phone and uninstall the application
- Hard Reboot the phone (power + "home" button)
- Re-install Skype on app store
- Now it should work on wi - fi as well - it worked for me and still works.
- Eventually reconnect to other devices if you have to.
This is a recent as problem it used to work fine.
My iphone connects to the WIFI in my house when I'm in the same room as the router but won't connect to nowhere elsewhere in the House.
Any other apple device I have works fine, so this would suggest that there is a problem with the phone?
Is it possible to fix this?
If your iPhone is in a case, first thing I would try is to remove the case and see if that fixes it. Other that that, I can't imagine any easy fixes. This article may help:
My next step would be to take it to a nearby Apple store and see if they can diagnose and help you.
I searched the problem as well I can I
to not eval, I can't have the Intel 5300 on a Lenovo T400 to connect to N or Radio
I tried every combination possible parameter on the E4200
and on the 5300
That was a lot of combinations
I can't get a G-connection on 2.45 ghz and only one on the 5 GHz range
To make things worse, try to call Lenovo is useless without a warranty
they wont even answer simple questions without it, crazy!
Have you disabled WMM on the E4200? If you have, then no card Intel and many will fail to connect to any frequency N. For 5 GHz specification requires it to be enabled, but don't really care about many adapters, unfortunately the Intel cards and fail to connect.
I recently updated my iTunes and now my iPhone does not connect to my iTunes. The computer asks me if I want to enable Apple Mobile Device Service to make changes to my computer. If I say 'No', iTunes responds so that this unusable iPhone because Apple's MDS is not started. If I say 'Yes', iTunes does not show that the phone is connected. Note: the phone will still charge. When I go to Services and find the MDS Apple and attempt to start it, it tells me that "the Apple Mobile Device Service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. »
I went to the Apple Store and called Apple Care. The problem is with the computer definentally. My phone connects to iTunes on other fine computers and my power cord works fine as well. Apple Care think that something in my computer blocks iTunes for some reason that I can't share my screen with Apple Support and "updates of Windows cannot currently check for updates, because the service is not running." You may have to restart your computer. »
I have rebooted both my computer and phone several times. I have uninstalled and reinstalled iTunes.
I don't know what to do at this point. I would like to avoid having to buy a new computer...
Thank you for your comments. My roommate eventually find me a partial solution. We uninstalled iTunes and reinstalled an iTunes earlier. He thinks that my computer isn't compatible with the latest version of iTunes. So I have the version iTunes 12.1.1 for Windows (64-bit for older video cards), rather than the 12.1.2. We are still not certain why my computer did not have the latest version (it's probably just old) but I can find my iPhone on iTunes now so I'll just ti let to the old version.
I did no update. This morning all of a sudden my iPhone does not connect to my wifi. As there is a block or? on this subject. Weird
Tap Settings > general > reset > reset network settings
You will need to re enter your Wi - Fi password in settings > Wi - Fi.
If this does not help, try here > If your iPhone, iPad or iPod touch connects to a Wi-Fi network
My 5s Bluetooth iphone works fine one day, the next day it does not connect to my Boise, helmet or Fitbit. My Bluetooth is on, I have it enabled or disabled and you have rebooted my phone. I have updated to IOS 10.0.2.
I was able to pair with my ipad.
Try the procedure described in this article to support > get help to connect a Bluetooth device accessory with your iPhone, iPad or iPod touch - Apple Support
iPhone does not appear as a device in my iTunes window, although it connects and works perfectly with the IMAGE CAPTURE. IAM using an iPhone 6 with a Mac running OS 10.8 and iTunes 12.2.2
Hope this helps, good luck to you.
Hello my iphone 6plus does not connect with the network on the upper left side of the screen it say research
Have you ever tried troubleshooting mentioned in this article?
I updated my phone and itunes for recent versions, and when I try to connect my device with itunes, it does not connect. My computer says that my phone is connected but my itunes doesn't work. When I connect my phone, a notification appears saying "allow this device to access the photos and videos? Nothing appears saying "approve this computer? I restarted my computer several times and my phone but it still does not connect. I tried the update of the driver portion, but he says it's updated, but when I go to view the file "Apple Mobile Device USB Driver" it does not appear on my computer.
Have you tried the following steps:
If so, you may also want to see excellent iTunes to turingtest2 for troubleshooting Windows guide to:
especially the chapters containing Apple Mobile Device Support.
Maybe you are looking for
Hellofirst I install Windows XP MCE, but a few days ago, I have install Windows XP Professional Edition and lost sound in my laptop.What was happen?How can I fix it?Someone say that's because Qosmio F30 can support Profesional edition. Truth?
Ok. I've seen other messages with this error. But I think mine is a little different. The problem: Prnter will not print anything at all, even a test page. It will not copy anything either. Low memory - cancelled job message comes up / have worke
I had this router for over a year and it's been perfect. I came home yesterday and the power was out. I have this router on a protective power and battery if I don't think it's a problem. None of my laptops can find a signal... it's like the 'radio'
Video clips can be grouped together still maintain their individual properties?Here's what I want to do. Let's say I want A clip from movie and video clip B. On the stage I draw a shape, convert it to a symbol > Movie clip and give it an instance nam
I try to include a picture in the beginning of my video, but as I put the photo in the timeline it becomes big, and so he only discovers a zoom in a part of the image.The size of the image is 5312 x 2988. File size 4.37 MBHowe do?