iPhone not charging when the Mac is in mode 'sleep'

Similar Questions

• Windows does not work when the computer starts in mode 'sleep'

  The computer is easily adjustable in standby mode when I press on the eve of my keyboard key. However, when I want to start the computer again via push any key, the screen never shows anything (just fill black and nothing can be seen). Indicators power will return to the pilot and solid seems also lit, but just nothing display on screen. I have to push the power to shut down the computer completely to restart again.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info in the link above and in the "related links", including this one:

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Dell Precision M6500: Reference DELL M6 500 computer laptop does not charge when the work and no start-up when which

  Laptop DELL M6 500, do not load when the work and no start-up when which

  just bettry lights blink when phone on Exchange when I plug laptop tap, on bettry

• iPhone not charging when connected to the USB power adapter

  Hello. I have a 5 s iPhone that I bought used a few months ago. It works very well.

  Normally I charge it by connecting it to my Mac via a USB cable. Last night, I tried to recharge by connecting Apple USB power (also called a power outlet) adapter, which plugs into the wall, supplied with the phone. (Here's a link to the adapter if you are not sure what I'm talking about:.) When I connect the iPhone to the power adapter, I saw that the phone is charging - there was the small icon representing a lightning bolt near the battery of the iPhone.

  However, when I woke up in the morning, the iPhone has been charged only 47%. I don't remember what the percentage was when I plugged into the power supply last night, but I don't think that the phone at that time was much less.

  So I wonder: nobody knows what went wrong? Is there a way to make sure that the phone is loaded with the adapter?

  Thank you!

  M

  If there is a symbol of bolt of lightning next to the battery icon, then the phone should be in charge.  If it is charging a single source, but not another, then the problem is with the unpaid source.  Try another adapter to confirm.

• iPhone not charging when connected to the computer via USB

  Original title:

  I use windows 7, when I connect my iphone to laptop, it does not load .i don't know it's because of device drivers not installed.when I connect my phone to another laptop its load.  Thank you

  Hello

  1. are you facing problems with USB devices?

  2. that you get an error? If Yes, what is the exact error message?

  3. is your phone detected in iTunes?

  4. doesn't Windows detect the iPhone as storage medium?

  5. are you aware of any changes made to the computer, before the show?

  Method 1:

  Run the hardware troubleshooter and check the issue.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to plug it into a different USB port and verification.

  Method 3:

  Check out the following link.

  iOS: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/TS1538

  I hope this helps.

• Airport Express do not work when the mac has been turned off

  I plugged our mac mini and the Airport express separately to the internet via a network hub. When I turn off the green light on the airport Mac Orange and blinks. The internet connection disappeared.

  Is anyone know how I can configure the network, so I can turn off the mac without cutting off the internet at the Airport express?

  Post a screenshot of the express installation of airport utility.

  I plugged our mac mini and the Airport express separately to the internet via a network hub.

  This seems odd... What is a network hub? They went to fashion 20 years ago. Do you mean a switch? Real model number please.

  What model is the express?

  Is anyone know how I can configure the network, so I can turn off the mac without cutting off the internet at the Airport express?

  Plug the Express directly on the main router... and implemented in Bridge mode and create a wireless network. That's the way it should be installed now... but this 'hub' could be a problem.

• Lose my ethernet internet connection when the computer goes into mode 'sleep '.

  I have a desktop with Windows Vista.  I have my internet through a cable company.  I've never had problems of connectivity for 2 years and then out of no where he would pass the signal after mode 'sleep'.  I had the cable company come out and check on all equipment and it's good that now, I'm still clueless and confused.  The connection icon have an exclamation point in a yellow triangle and say "limited connectivity" and «identify...» "and then I click on Local area connection status and make a diagnostic test that will get me connected to"network 2 "until it goes into sleep mode and then the process repeats.  It's boring say the least.  When I login and go to the LAKE State he says;

  IPv4 connectivity: Internet

  IPv6 connectivity: limited

  Media state: enabled

  Duration:

  Speed: 100.0 Mbps

  He said that the issue is resolved after each diagnostic test, but then it happens again.  I need some help pleaseeee!

  > I need some help pleaseeee!

  But you're in the wrong group! It is a problem with your network driver
  or your Windows installation. You have this repost to a suitable for Windows Vista
  Forum. It is possible that a newer driver from the network has a problem with sleep
  mode, you should try another pilot (older or newer).
  From your description, there is a problem to renew the lease of your
  DHCP server (which must be running on your router), it does not use the
  IP address assigned earlier or he does not do / IP address (which
  should be the same) we get the router. It is also possible that the
  problem is with the router or a new firmware on this subject. You should study
  These two avenues, including a replacement of the router and firmware.
  Another very simple solution is to configure your PC for a static IP number and
  leave it like that. In the forum, I mentioned, people will be able to talk to you
  through this option if you don't know how to do this.

  --
  Kai

  IEFAQ: http://iefaq.info Newsgroup: microsoft.public.de.internetexplorer

• windows program will rearange themselves when the monitors are in mode 'sleep' - how to stop windows switching screens

  IV has 3 screens on a map via display port adapter and a 4th on a second card in order to have a 1 on top of three parameters.

  the computer itself does not sleep because I have servers running but I put screens on standby after 10 minutes.

  for a long time, all screens would go to sleep and wake up without any problems... in the course of the last months, 2 questions.

  1. once the monitors to sleep and no consistent time 1 monitor wakes up enough to show the backlight, but no display... wake up ok and sometimes screens dislocated.

  and

  2 when the monitors have the power save / standby mode, some of the Windows I had open will have been moved to different monitor as monitors have been disconnected or "detected" numbers have changed and I saw the change number several times as well, but not always.

  I say some because I have 4 windows open on my left most monitor and 2 of them end up on my right monitor after the glitch.

  Sometimes things on my low Center {main} will end up on the top of the single monitor page.

  no rhyme or reason... a few days no problem at all don't wake up and everything is where it should be and all the screens have slept through the night

  for all the tech info

  ATI 5750 and 5770 in mode xfire w / 1displayport/DVI / HDMI/DVI 1 / 1 DVI.

  and ATI 5450 to the top of the monitor page

  Windows 7 x 64 / 8 core AMD8320 / 16 gig mem.

  latest video drivers...

  any info?

  I'm a tech and iv been scratching my head for a while on this one

  thnx in advance for reading even to see my problem

  thnx even more for an answer... lol

  Hello

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• BlackBerry Smartphones Blackberry 8520 does not charge when the battery is empty

  I use my blackberry curve 8520 for 5 months before selling it to a friend. He forgot to charge the battery, and now my Blackberry is empty and does not load. I tried to load a full battery of half and it works. The phone is not responding to synchronize eather. Does anyone have a solution?

  Hi and welcome to the Forums!

  BBs will not work without minimum charge. I recommend to leave it on the charger for at least 2 hours before trying anything.

  In addition, these batteries do not like exhaust totally... is it possible to make the battery unusable if they are drained. So, if she will not accept a charge, then, is probably not good longer, and a spare battery must be obtained.

  FlorisvdP wrote:

  The phone is not responding to synchronize eather.

  You need to develop that little more... it's kinda a sparse description.

  Good luck and let us know!

• Adobe Muse does not start when the Mac OS SIERRA

  Muse (latest version) Adobe no longer starts

  -It has nothing to do with the fact that I've updated my Mac Mac OS SIERRA (Beta)?

  -Photoshop (latest version) launches successfully.

  FALSE ALARM:

  With the update of June 20, 2016, Adobe Muse works 'perfectly' with MacOS Sierra (Beta 1). Thanks be to God.

• 6 iPhone is not charging when pluged

  Hello

  My iphone 6 won't charge when plugged, I tried several Chargers and power outlets but it does not load. However it does not charge when I connect it to my computer. Anyone know how I can fix this problem?

  Any help appreciated, thanks.

  Get the phone by Apple or an Apple authorized service provider, this problem could be linked to the docking port.

  Launch a service request

  Find an Apple authorized service provider

  Make an appointment at the Apple Store

• My Ipad charger charge my iphone 5s only when the phone is turned off

  Hi guys. My Ipad charger charging my iphone 5s only when the phone is turned off. The phone does not recognize if it is on and I can't transfer files with it. Help, please?

  Hey Bigfootinyourface,

  I understand that you have a problem with your iPad charger or cable. Accessories and connectors uncertified can often result in the mentioned behavior. Article in the link below provides information that you may find useful.

  Identify the fakes or not certified lightning connector accessories
  https://support.Apple.com/en-us/HT204566

  See you soon!

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP