IPhone not detected, but it was earlier

Earlier, it has been detected sometimes. I don't know the main issue. I had a damaged cable, but a previous version of itunes. I had the intention of iOS 8.4 update to the latest version as some tech of a store person said he could help the battery drain issue.

iTunes doesn't detect it easily, but once he did, I saved everything. However, itunes says that update, I have to update itunes. soon, updating (or after synchronization), my phone is more able to be detected. I read an article online that said to uninstall the driver in order to to refresh. It replaced the pilot apparently by a new, but windows doesn't detect the phone easily (but), and yet he sometimes showed the phone in 'my computer '.  Sometimes only from my computer.

He was not in the Device Manager. I tried this trick to remove the lockdown folder when itunes has been closed. However, itunes has always not show it, but the phone was showing in 'my computer '. Now, it is difficult to know what is happening. I want to have the unit recognized in itunes.

I also bought a new cable since I had some mistakes with other one in any case. But when my iPhone 5 is shown, it now appears as a portable device, it seems that I can access it through "my computer".   After watching closely in the Device Manager, it seems that he went from one category, I think to portable devices. but it is not recognized by itunes. I think he was previously in the storage controllers.

How should I do? ITunes thinks that's not on my system.

https://discussions.Apple.com/message/27675319#27675319 found the solution myself.

Tags: iTunes

Similar Questions

  • Satellite U840 - battery not detected but is able to load

    I'm on a Toshiba satellite u840, now that its battery is not able to detect, but it can be loaded and also after a while amount after charging, it can be used without the main cable. But the main problem is that my laptop is unable to detect the battery, I don't see how much battery power is :/

    Need help please, I don't really know what to do

    > But the main problem is that my laptop is unable to detect the battery, I don't see how much battery power is

    You mean the icon does not appear in the taskbar or what exactly do you mean by + I don't see how much battery power is +?

    What Windows system do you use?

    If you are using Win 8 try run and use the command: sfc/scannow
    Here is the description: http://support.microsoft.com/kb/929833

    The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  • Skype detects microphone does not detect but no sound through it

    Hello

    I have my headset connected to my card his and my card its connected to my PC via the USB cable. I tested with two cables different and three different ports.

    When I connect my headphone directly on the PC, everything works.

    When I connect it to the sound card, the microphone is detected but when I talk to Skype levels will not upwards, unless I'm talking really loud or put the microphone almost inside my mouth. The thing is, he works outside of Skype. I put the setting on windows to hear what the microphone picks up and I hear what I say, but it does not appear on the levels of Skype.

    Any solution to this?

    Thank you

    And apparently, the sound card has an option "noise gate" turned to 100% which, for some reason, did not allow programs capture levels. I put it completely, and even though the quality seems a bit tipsy, it works now.

  • Computer laptop 15-f211wm Mod #L0T32UA: USB external HARD disk and laptops not detected but used to be

    My USB ports do not seem to work properly.  I used to be able to plug in my external hard drive and mobile phone to transfer files, but now I can't.  In the DEVICE MANAGER of the laptop, nothing seems to be wrong, no red or yellow warning.  However, the USB ports DO not seem to power the devices, my cell phone goes into charge mode and my HDD Seagate you can feel it vibrate slightly.  There are two USB ports on the left side and one on the right, and all three can not detect devices.  Help, please.

    HERE IS a GUIDEto solving the problems of USB such as described in the post.  See if any of these help.  As you have posted in the notebook section, when you do that a single step to cripple, also remove the battery after the computer shuts down, unplug charger, too.  Then hold the power button for at least 30 seconds before feeding back.

    BTW: have you tried to delete all things under the rubric of the USB in the Device Manager, then reboot to allow Windows to reinstall the USB ports?

  • new sansa clip more 8 GB not detected but charge

    I got a sansa clip more 8 GB as a gift. new but old stock. everything works fine. except this is not detected by the pc. It will load.  I installed the drive, but I think that it isn't installed rhapsody. can I completely ignore the part of the Rhapsody? total newbie to mp3 sansa. I'm using windows media player 11, vista ultimate 64-bit version

    Miikerman wrote:
    As ends in General, no matter what Generic USB cable with straight plug should be fine with your drive. My hunch is that there may be some problems with the USB cable you have tried (something that you might want to check, by the way). Sometimes I use the USB cable that came with my Clips, sometimes I use one of my many generic not cheap-o cables; six of one and half a dozen of others - they all work very well.

    There is there the cables that don't transfer data, only the fee...

  • Headphones not detected, but playing the speaker and headphones.

    I have a hp laptop Pavilion g6-2231tx with windows 8. My speaker works fine, but every time I plug in my headset it detects not she but the audio comes from speaker and headphone.

    I have already uninstall the driver and re-installed but it does not work for me.

    I'd appreciate really any notice about it.

    I have to return my laptop to hp (still under warranty). HP said is it a hardware problem and replace equipment.

    It's corrected now.

  • Image have not download but I was charged

    On 16 June, I reported a problem with an image that did not download on my computer.

    I was asked by the representative of cat to wait 2-3 hours because Adobe and related services were the maintenance of the system and IT / Web team worked on that.  I have a transcript of the chat conversation.

    I waited until late at night, but I needed the image in any case to illustrate a message that was to be posted the same evening.

    So I connected to my history of account/license and tried to redownload the image.  I tried 4 times, until I finally got.

    But now I was charged for 3 licenses above that I needed.

    How can I get a refund, since it was not my fault

    Hi Vera,

    I see you the #100144932 image license three times. I gave you 2 credits for your account picture. Next time you sign in Stock, you will see the additional appropriations in the navigation bar.

    EBQ

  • I can't acess the ethernet. Adapter is not detected but not internet access.

    Hi, I have acer 5740 laptop. Last week, I tried to connect to ethernet, but there is no internet access

    Hello

    I suggest you to refer to this link and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    It will be useful.

  • Just bought an album & download, a track that has been 'Album' only has not downloaded, but it has been purchased?

    Just bought an album & download, a track that has been 'Album' only has not downloaded, but it was purchased?

    Ive tried everything I can think off, but cannot get loaded. Tried all the usual verification, for available downloads etc. both my Mac and iphone but its does not work.

    When I view the album on Itunes, her show songs that downloaded, except this last song, which only says: 'bought', but no option to download.

    So, ive got 7/8 of an album! which is a rip off and very frustrating?

    Anyone have any ideas?

    Steve

    You and I can have a similar problem. Has been the "Skeleton Tree" album by Nick Cave and the Bad Seeds?

    I am facing the same issue. I can get the song 'Album Only' to appear in my music library by clicking on the album and then clicking on "See the complete Album." However, I still cannot sync with my iPod/iPhone, and unless I click on "Show full Album", I can't do my music library to interact with it at all (that is, if I play the full album, it ignores the song 'Album Only'). And even if I do this, I can't move it to a playlist or something like that.

    I would really like to have an answer to that as well.

  • Satellite L650 does not detect wifi networks

    My laptop Toshiba Satellite L650 ceased to detect wireless networks.
    It shows only Dáil and vpn...

    The wireless network is not detected.
    I was able to connect to the network using my phone, so something was wrong with the laptop.

    I also checked if the broadcom 802.11n works or not and it appears as works perfectly.
    But don't detect is not wifi networks.

    Could someone help me with this?

    Wireless network card is enabled?
    Is WLAN led on when you use the FN + F8 key combination?

  • SIM is not detected...

    I brought a flipkart x motorcycle and went up to my normal size SIM minced in a sim of nano. The SIM card is not detected on 3rd day morning. I reinserted the sim card and it was beautiful once again. 4th day, Sim become again detected and even after reinserting the sim card and the phone restarted, he remained unnoticed. Therefore, I used my old phone HTC Explorer with the same SIM card and it worked very well. In the evening, when I inserted the SIM in Moto X, it worked fine again. On the morning of 5th (which is today), returned SIM not detected, it's now evening and always the SIM card is not detected but same sim works fine in my other phone?

    Might need to get a new SIM from nano. It's funny how it works in one phone and not the other.

  • Hard drive (redirect) does not detect

    Hello

    I have dell inspiron1525 n but yhe, I was working on my laptop it suddenly turn off n when I try to start it, it does, ' t. dignosis test to make it display the n stop error. so I see the start menu where harddisk is detected but laptop was does not start. then I took out the internal hard drive of computer laptop n connect it to another pc take n hdd dignosis test n it spend the dst tedt but error in the short generic test.  so now I can do > I have very important data in my hard drive, and I have no back up, is there a solution to this problem? If it please lem in knowits of very important data to me... in the hope of a precious solution...

    As you have a laptop, better make this laptop in the computer Forum post here:

    http://en.community.Dell.com/support-forums/laptop/default.aspx

    Bev.

  • HP Probook 450 G1: Windows 8 HP recovery disks has not detected

    Hello

    In the hope of someone can help me. I recently had a problem due to what I have to perform a recovery using HP RECOVERY discs [I ordered it] I don't have the HP Recovery Manager or the recovery of microsoft. So I have to do only through HP recovery disks.

    If his sudden has not detected in my laptop. I hit the bottom of the hard drive, I can feel that it is rotating. When I double clicked on it. It appears that I have to insert the disc. [Although I have inserted]. I wiped also DVDs with a cloth dry go with stripes. I tested on my PC it detected [of course it won't work because it is not HP PC].

    I also diagonsised the hard drive [wide test] component, it has demonstrated that it meets the test. I tested both with other CD/DVD games. It works very well.

    I hope you got my problem.

    Product number: F6B14PA #ACJ

    Thank you

    Hello

    Thanks for posting in the HP Support forum.

    Please correct me if I'm wrong, but from your description, I understand that the HP Probook 450 G1 does not detect the recovery DVDs. However, the other CDs/DVDs work fine and the recovery (at least detected) on another PC media.

    I understand that you need to recover, but despite this, Windows starts correctly now? What is the problem you can get you to try to recover? In Winows, recovery disks are recognized?

    To be honest, I don't know why it is not detected, but there are some things you can try:

    -Boot in the BIOS and disable secure boot + turn on Legacy mode

    Details > > http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/The-selected-boot-device-failed-Press-enter-to-continue/m-p/5730515

    Details > > http://support.hp.com/us-en/document/c03653226

    -Try to boot from the media of recovery of the DVD (first is the one that is re. OS - I see, you should have 2 recovery DVDs - one for the OS, one for the drivers).

    keep hitting the Esc key (such as tap-tap-tap).

    This should open a HP Boot Menu. Choose F9 to open the boot options. Select the USB drive as boot option.

    I would like to know if it works for you.

  • External hard drive not detected

    I have an external hard drive of 4 Marine to... .and a Macbook pro with the latest El Capitan... When I connect the external hard drive for Mac pro, an external hard drive can not detect, but there is a light flashing on the external hard drive. It worked well until last night after I used iTunes and went to another Mac. I still eject properly.

    Any ideas on how to solve this problem

    Try using disk utility to repair the disk. If the drive does not appear in the disk utility list, then he dies. Contact the manufacturer or supplier.

    Shut down the computer, disconnect the drive. Wait five minutes and then reboot and reconnect the drive.

  • Satellite P755 - Bios is not accessible, but Windows works

    Hi all

    I have a big problem with my computer. My Bios does not appear...
    At the exit of Windows 8, I did a full format on my computer to accommodate this new OS with beauty. Some time later, I installed Ubuntu 12.04 in Dual-Boot.
    One of the two facilities are doing? lost me the BIOS, let me explain:

    Knowing that my computer is a Toshiba, normally, when I start, the first image that appears on the screen is the Toshiba logo and down ' press F * to access the BIOS. " But I have no more of this logo, instead, I Dual-Boot option appears asking me to choose one of the two BONES (I think it's the GRUB, I'm not sure, but he was purple, so...). After selecting one of the two BONES, I go straight to the page load of the chosen one.

    I didn't get worse, so I left it because it wasn't bothering me... until last night.
    My computer was getting a bit slow, I decided to format it again, but as I said, I have no BIOS, so not boot via DVD at startup. I had to format by Windows, leaving behind the Windows.old folder on the hard disk. But I wanted to fix my famous problem at the same time, so I decided to uninstall Ubuntu and install Windows 7 instead of 8.

    Everything was going well with uninstall and install.

    Win7 is restarted, still no Toshiba logo, and I get the Dual-Boot option, as before, asking me to choose between Ubuntu and Win7 (I already uninstalled Ubuntu), but this time, the screen is not "purple", it is black...

    When I'm on the Dual-Boot, there are only two buttons that work, the F8 and F10.

    When I press F10, I have this:

    Change startup options: Windows 7
    path-windows-system32-winload.exe
    Score: 2
    hard drive: 97f097f0

    / Noexecute = optin

    When I press F8, I enter the menu of Windows repair, where there restore Windows, command prompt, repair Windows, etc...
    I tried a few things, typed on the command line like fixmbr, etc, but nothing worked

    I'm stuck on Windows 7 without Bios and a Dual - Boot does not work, I don't know what to do...
    I've looked everywhere where my problem comes from, but does not have the awnser.

    For more information, I have a Toshiba P755.

    Well, I hope someone answer, even though I know that this problem is a bit weird...

    Thanks in advance to all who will try ^^

    I think that the dual boot is always available in the Master Boot Record (MBR) and so this double menu boot appears to turn on/off the device.
    But this should not prevent the notebook to access the BIOS.
    Usually, you can access the BIOS by pressing F2 while turning on the laptop.
    I recommend that you press this several times in the line.

    However, I think that the reason why the Toshiba screen projection does not appear is simple: in my view the QuickStart has been enabled in the BIOS.

    You will find the option called startup speed in BIOS-> Advanced tab.
    Usually its normal value.

    If his play on Fast, the BIOS should start from disk built-in HARD (or SSD), the laptop would support only the LCD and keyboard internal and does not display Toshiba Startup logo. Therefore, put again to normal.

    In which case you would not be able to access the BIOS by pressing F2, I recommend to remove the portable computer HARD drive and turn on the unit without the HARD drive.
    Then press F2 to enter the BIOS

    Your comments and good luck would be appreciated,

Maybe you are looking for

  • Error in device IO after installing Vista on Satellite A105-S334

    Need help please!Recently, I did a full restore of my computer Toshiba Satellite laptop.My computer came pre-installed with Windows XP Media Center edition.I had upgraded to Windows Vista, which was one of the worst computer decisions I had made. Tha

  • I want to replace the DVD-RAM UJ-846 for Qosmio G20-127

    Hello I want to replace my carpet * a DVD-RAM UJ-846 of the G20-127.Someone knows his apare part # and any sugestion wich RAM is compactables for my machine and better plase to get?

  • File CSCur02861 UCCX COP

    Hi guys,. Can you clarify or explain how to apply the UCCX COP file dealing with CSCur02861 question? I downloaded the file from the Conference of the PARTIES and the Cisco downloads release notes. It is written in the note of the release, "for instr

  • Cannot install PEM/pkcs12 created by gnutls ASA

    I was pulling a few hair trying to figure why the cisco devices like my certificates. My primary need is to get a trustpoint put in place with CA, cert, key on the SAA for VPN systems, but I'm having the same issues on my IOS devices. I created a pkc

  • Adobe Captivate 7 - How to create a custom without the function table of contents table of contents?

    HelloI want to create a table of contents in my E-Learning-project because the automatically generated TOC of Adobe Captivate 7 includes all the features I need to check for example chapters which are the groups in the film strip.I use master slides