IPhone on the pricing policy disabled USB ports in Windows

Hello

For safety, we stopped ports USB one our business using Group policies in a Windows environment. USB keys, USB, camera hard drives, phones, all are not allowed to install and use when connected to a computer. Capablities charge are still working on the iPhone, Android devices, but are not charged if the driver is or cannot be installed. Can someone tell me why this is and, perhaps more importantly, if there is a way to make iPhones load and always disable their data connectivity capabilities. Internet research and these forums have not made clear things for me on this subject.

Kind regards

Michiel

I don't know if it will work, but there are some not Apple cables that are pricing only, not charging and synchronization. It can be difficult to find one who has certified the IFM and these types of cables are generally good cheap and of poor quality, so this may damage your phone if you're not careful which one you buy.

Tags: iPhone

Similar Questions

  • DISABLED USB ports

    I have a gateway HARD drive 320, memmory 4 G laptop i3, I lost connection in all 4 of my USB ports.  I tried to uninstall them and reboot, I tried disabling and then enabling USB ports and nothing works.  Help, please!

    Hello

    Check with Support technique Gateway, their documentation and online drivers.

    Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

    For a laptop, using a real computer store (not the leeks and the glances at a Best Buy or other stores)
    or the manufacturer of the support system.

    ------------------

    References to Vista also apply to Windows 7. (Vista is similar - to use XP RUN instead of start - search)

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -----------------------------------------------

    Then lets refresh the USB stack

    Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
    Devices disabled - look around (with the exception of USB controllers) for your devices (can have
    zero or more than one) and top - right click UNINSTALL.

    Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
    UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

    This KB shows XP how to and methods of Vista and Windows 7 are the same
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer.
    as well as all USB devices that you previously used. Run Options and tick three 1
    are there choices to see if any.

    http://www.NirSoft.NET/utils/usb_devices_view.html

    You must remove all instances of the devices and restart.

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    I hope this helps.

  • Closing lid on my CQ61 disables USB ports...

    I try to use my Compaq CQ61Z as a HTPC.  I connected via HDMI to my stereo receiver and use a keyboard and mouse with Receiver USB wireless to fight against it from across the room.

    Everything works fine, except when I close the lid.  I found the power setting to do not have the laptop to standby automatically when the lid is closed, but the keyboard and mouse stop working when the lid is closed.  This pretty much kills the idea to use this laptop as a HTPC.

    As soon as I open the cover, the KB & mouse start working again.  I can't find anything in the power settings that would have an impact on the USB ports.

    Any suggestions?

    If you go into the advanced power options there is a setting for USB devices, you can change to disable selective suspend

  • Re: Satellite C650 - problem with the devices connected to USB ports

    Hello

    Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

    The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

    The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
    Thanks in advance

    Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

    Post edited by: leahhw123

    Hello

    What happens with plug n play like USB mouse device?
    You are able to use an external USB mouse correctly?

    > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
    I guess this could be a problem with the software or drivers installed.

    I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

    In addition, you can try to install this software once more, check whether this USB problem appears again.

  • On the Satellite P300-172 USB port failure

    I bought this laptop in August 2008, I had no problems with it until last week when the USB port I plug the mouse in stopped working.
    I changed to the following, it also wasn't work, but one of the other side worked ok. Use the computer laptop all that evening, the next day it would not start, just got a whole screen, that came out and it turns off, back on, power lights all came, but just a blank screen. I noticed that the area round the s defective USB was really hot in a few minutes.

    According to me, the failure of USB caused a significant fault, motherboard maybe.
    I paid a lot of money for this laptop and I expected to last more than 13 months. I tried to call Toshiba but I can t live without it repeat press this button for the Department you want, but whatever the button that you press it back to the original message.

    If he had an idea of what could be the problem with the laptop and he thinks that too much power going to him, asked a computer engineer.

    Someone at - it an idea what could be causing this, I am housebound and rely on the internet.

    Hello

    His pity to hear that your laptop has started to malfunction, but a hardware malfunction can always happen. Generally, you should contact the ASP (certified partner) in your country for assistance.

    I put t know where you are but I found this page from Toshiba Europe ASP database:
    http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

    Regarding your question.
    In most cases, the higher internal temperature might be the reason for this closure downs.
    Portable media some sensors that would power the laptop off to prevent material damage the temperature can increase because the cooling modules are blocked because of the dust and debris also use of non-Toshiba graphics card driver can cause problems of graphics so it s always advisable to use the graphics drivers from Toshiba.

    In any case it seems that your laptop needs expert help then get in touch with ASP in your country and ask for more details.

  • Import photos from the iPhone to the iMac with cable USB not working not

    I can't import pictures from two iPhones different (a 4 and a 5 times in the course of running iOS 9.1) in Photos on two different accounts on our iMac cable connection using the USB.  The entire section of the pictures tool bar containing the import photos button does not appear in the attached Photos help page.  How to make part of the convening of a tool bar?

    Have you confirmed that you trust the computer to the phone? Otherwise, start iTunes, unlock iPhone, then confirm that you trust the computer on the iPhone.

    You use Dropbox?  Then ensure that the preferences in Dropbox are set in a way that Dropbox is unable to access photos on your iPhone when the iPhone is connected.

  • Passport Mass Storage Device does not appear to the top, when I plugged in the USB Port on Windows XP

    I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.

    Hello

    1. what happens when you plug the device to your computer, you get an error message?

    2. don't you make changes to the computer until the problem occurred?

    I suggest you try the steps mentioned below and check if it helps.

    Method 1:

     Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.

    Method 2: Try running the Fixit tool from the link below.

    Hardware devices do not work or are not detected in Windows:
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 3: Also try to follow the steps from the link below.

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

    Hope this information is useful.

  • Sansa Fuze: Play through the car stereo with USB port

    I bought a fuse to play through my new car stereo using the USB port in the car.  It works fine if the the "rocket" plays internal memory, but does not work when I insert the micro-SD card [even tho SD card works fine in rocket not connected to the USB auto]. Any ideas? Sansa says lack of his car, but car people say no, and highlight car cannot distinguish which comes through the USB. On the same topic, someone tried to use a "USB" port USB auto?

    I can't speak for the part of SD card of your question, because I have not yet tried my rocket in my car.

    When you connect a rocket to a computer, however, the SD card appears as a separate drive. Maybe the radio cannot deal with the way in which the "rocket" offers access to the SD card. There is (cheap) USB key in the form of micro-SD card readers. Maybe that would fit your purpose here. Simply put the micro SD card in the drive of the USB and put the USB in your car stereo.

    USB USB keys should work properly in car radio with a USB port. I tried several disks to different USB memory and they are all worked well.

  • the drivers of my usb ports do not work

    I have purchaced new hp sleekbook os-win8, but after only a few days the usb drivers do not work what shoud I do

    What you plug into the usb port.

    Have your tried several devices?

    When was the last time they worked?

    Try to remove the drivers in Device Manager.

    Then restart and let them reinstall

    In the event of failure of the test a system restore to earlier date when they work.

    Here's how to do a system restore

    http://www.YouTube.com/watch?v=CsY_FnyJzdo

    ___________________________________________
    * Click on the star of CONGRATULATIONS on the left say "thank you."
    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  • Since the L7680 installation my usb ports are not detected...

    It seems that something in the registry has been changed.  My Western Digital Passport (mass storage device) is not detected is not my SanDisk Micro (2G).  Western Digital will work in the USB from the printer, but don't the SanDisk.  I've lost the use of all of my USB ports on my computer processor and montor.  They used to work before installation.  I uninstalled and reinstalled, I check startup items in MSCONFIG.

    I read on the Microsoft support page which the hkey_local_machine\system\currentControlSet\Control...

    should be set to activate, but I do not have this folder in XP.

    Western Digital does not know what is happening, or not SanDisk.  HP really gave me the run around way to uninstall and reinstall, but I didn't get an answer that solves the problem.

    It seems to me that since it was drivers from HP which caused my other unit to pass unnoticed, HP should be able to tell me how to solve this problem.  I do too much research for a new product.  I know I'm very frustrated, and since this is a new printer I still have time to take it for something that's going to work.  I had a Dell that has worked well, I wanted to just an upgrade.  I guess I could have updated by Dell.

    Just about the evacuation, someone has an idea what the fix is for my USB not detected ports that have been replaced by the reader on this printer?

    I added a new HP printer to my set all my ports no longer works. None of my flash drives or removable hard disks worked. I tried everything and then read "ports must be updated". My computer is older than three years and the ports of origin are 1.1 and are of most new USB 2.0 devices. Long story short, I went to microcenter and bought new ports ($11.00) and add them to my computer. All ports are now functional.

  • What is the function of my USB ports?

    I bought the HP Pavilion 14 t. I have two USB ports on the left with "SS" on this subject and a USB port on the right. When I plug stuff in the side "SS", nothing does not appear. When I plug in the right, that's fine. Why the left doesn't work? Why can I not have my printer and flash drive show when I plug?... What is the purpose of port USB "SS"?

    Hello

    A port with SS is for Super Sdone wet or USB 3.0 port. He must accept a normal flash drive, it cannot accept all printers. Looks like your machine doesn't have a good USB 3.0 driver. What is the product/model of your machine? It's a "HP Pavilion 14 t' which means very hard for complete details and what operating system? Please check device manager for USB hardware id:

    http://www.WikiHow.com/find-hardware-ID

    Kind regards.

  • change the printer to a usb port 7520 wireless

    My network is not available.  My HP7520 is defined as the wireless.  How can I connect it to my computer?  There are a small USB port on the back of the printer.  but regular size one on computer.   Thank you!

    Hello

    You should get a USB 2.0 High Speed for a printer cable, this is a standard cable and can come from any store.

    It should look as follows:

  • I have a Kyocera FS-820, but I could not able to install the USB Port in windows 7

    I need to install my old printer is the Kyocera FS-820 printer which works properly on Windows XP, but when I bought a new laptop which has Windows 7 Home printing USB no longer works. I tried to install the driver, but unfortunately I could not able to find the USB port.

    When I plug the usb PRINTER cable gives me an error of USB DEVICE NOT RECOGNIZE.

    Can someone help me what are the installation step by step in my printer thank you

    It seems that Kyocera has a driver for Windows 7 which you can download from their support site (download file - make sure the file name and where it is being recorded and then search for and double-click on the downloaded file to install it): http://usa.kyoceramita.com/americas/jsp/Kyocera/resource_details.jsp?pid=13988&rid=22655

  • Problem with ZTE MF190 Dongle ("USB mass storage) with the group policy restricted USB storage.

    Please

    I have windows 7, Member of the domain, we created the policy in the domain controller to restrict any USB storage device and it works well.

    My problem is: when I install ZTE MF190 Dongle (USB Modem Stick) first time as administrator it work well, but when restart windows and switch the usb modem, connect as user limited to work, it has not detected (Modem USB Stick) in windows and I found in the "USB mass storage" Device Manager with yellow mark and tied to the usb modem.

    My question is: how except "USB mass storage" which associated (Modem USB Stick) of limited strategy of USB storage for the usb modem work.

    Note: I've updated "USB mass storage" windows with compatible driver (USB composite device), the modem worked, but when restart it windows that the same problem with "USB mass storage" brand yellow and usb modem not detected again in windows.

    Help, please.

    Hi Yahia,

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  • Windows 7 on the right of my usb ports now do not work all of a sudden?

    Today everything to plug my mouse as usual, both of my USB ports on the right side of my laptop on the right side, all of a sudden didn't work, I tried to restart my computer 4 times but nothing has changed, I need help as soon as POSSIBLE because I ethier can't use my mouse and I can't use my keyboard and it is incredibly annoying to have to switch between the two , I also play fast games at the pace where I am not even able to play these games.

    Hello

    I'd like you try to uninstall the USB drivers.

    See the steps-

    (a) click on 'Start' and right-click on "computer".

    (b) now, select 'manage '. Choose "Device Manager".

    (c) expand "USB controllers" and right-click on the USB drivers one by one and select "Uninstall".

    (d) restart the computer and check.

    In addition, I would like that you download and install the latest drivers for chipset for the computer from the manufacturer's website. You can ask the manufacturer for assistance.

    Note: Install the chipset drivers are at your own risk.

    We know if that helps.

Maybe you are looking for

  • Cannot search with the address bar of firefox

    COR - el and another person suggested bugs. None worked. As suggested by Cor - el, I now get keyword enabled as TRUE. Research still does not work. It changes search word to a URL, however - a step in the right direction perhaps.Sorry, I could not pu

  • What is the green line in the address bar and how do I get rid of him?

    Not more happy with Firefox 5 that I was with Firefox 4, but I at least 1 new problem. There is an irritating, ugly green line that appears in the address bar. What is this and how do I get rid of him?

  • Windows Server 2003 - Error Codes: 0X800706BE & 0X800706BA

    I have a server with Windows Server 2003 Enterprise Edition custom which is made of multiple system errors of Windows Update Agent with ID 20. Here are some examples: Installation failure: Windows failed to install the following update with error 0x8

  • Does not, how I update BITS?

    I reinstalled IE8, after which the Windows updates did not work and I got error 0 x 80070424. (XP SP3) I have re installed SP3, but this does not solve it. I tried the FIXIT suggested by David Vinod (http://answers.microsoft.com/en-us/windows/forum/w

  • upgrade to windows 8 pro

    Hi I'm trying to upgrade from windows vista to windows 8 pro. Is this possible? Help, please.