iPhone ran out of battery, now wont start black screen after the apple logo

Hey not last night, but the night before, I forgot to plug my phone so it died while I was sleeping. When I woke up, I plugged and went a little. When I came back I noticed that the phones screen was on, but black. I tried to restart with the buttons and everything that I do not understand what could be wrong. The battery is not cause fried, it continues to display the apple logo then a black screen. I would prefer not to have my phone back and to lose everything, and I can't really afford to pay someone more than 200 to tell my my phone is broken, please help.

Have you tried that?

Try a forced reboot. No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

Tags: iPhone

Similar Questions

  • I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

    I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

    Try the following. It seems yo may have to let the battery drain is completely:

    - iOS: do not respond or does not light

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    Shop Apple Store - Genius Bar

  • iPhone 6 alternating between the black screen and the Apple logo and nothing else

    my iPhone 6 alternates between a black screen and the Apple logo, what do I do?

    Hi Nathanielfromwa,

    If your iPhone 6 alternates between black screens and the Apple logo, this could be a problem that can be fixed by wiping your iPhone to factory settings. If this is the case, save your iPhone first. I've included links if you need help with backing up your iPhone, but also to reset to the factory settings.

    How to back up your device using iCloud or iTunes - Apple Support

    Erase content and settings on your iPhone, iPad, iPod touch or Apple Watch - Apple Support

    I hope this helps, and if you have more questions, do not hesitate to ask!

  • My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

    Hi Apple/community,

    I need a help.

    What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

    Any help will be greatly appreciated. Thank you!

    Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

    Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

    If it works, try to repair the disk with this command:

    fsck -fy

    (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

  • IPod touch 6 generation is passed in brick mode and I restored with put it in dfu mode and restored factory via itunes and it says that it has completed the restoration. And it the ipod starts up and has the apple logo and a loading bar which is st

    IPod touch 6 generation happened in brick mode and I restored it by the he output in dfu mode and restore to the factory via itunes settings and it says it has finished restoring. And the ipod starts up and has the apple logo and a loading bar that do not move and it's stuck and it's been a week and I've done this process over and over

    Hi, Slkdogg1.

    Please visit Apple support communities.

    I understand that you cannot restore your iPod touch, and it looks like it is stuck on the Apple logo with progress bar.  I would like to start by going through the steps outlined in the article below.

    The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch

    If this does not resolve the problem, try to go through the troubleshooting steps in the articles below.

    Solve the iOS update and restore error in iTunes

    Resolve alerts related to USB in iTunes

    See you soon

  • My Dell Vostro 1310 won't start. I turn it on and the black screen with the Dell logo appears and nothing more

    It was working fine and accidentally my phone fell on the keyboard and the computer froze. There was a part of the image of what was on the screen before that happened and blue and red lines/markings or whatever it is. I unplugged and took out the battery. When I turned on it again, the black screen with the Dell logo comes up and just stays there. What should I do?


    If under warranty contact Dell


    or ask in the forums Support of Dell


    If it is under warranty, contact a reputable repairman, local computer

  • MacBook (2010) starts with black screen with flashing Apple logo

    I recently got ahold of a Macbook Pro 2010 running very slow so I did a reinstall of the operating system (which was a living nightmare, Macintosh is not as easy to manage as it was at the time of PowerPC) once I got to the top and running, I decided to upgrade to the latest version of El Capitan (an update (not an upgrade I already had a version out there) once I rebooted and let the computer do its thing he began to start up normally, but after finishing the progress bar, he went to a black screen (with the screen still on) that flashed the boot from time to time Apple logo. I forced shut down the computer and start in safe mode with success (that's how I'm typing this post now).

    Thanks in advance.

    When you reinstalled, did you remove any third-party system before reinstalling.

    A Mac that runs in Mode without failure, but are generally not normally indicates some incompatible system changes.

    Software common problems are things that are intended to clean, protect, optimize, accelerate, or otherwise maintain your Mac.

  • Start the computer to a black screen after the improperly installed display driver

    original title: display driver

    I installed the wrong display driver and now black screen when the computer starts


    Start mode safe mode with networking.

    Go to the website and get the correct - driver download but don't install it yet.

    Control Panel - device - graphics cards - right click on the adapter Manager - UNINSTALL-
    Check the box - DRIVER to REMOVE when complete reboot safe mode.

    Now, install the appropriate driver.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • 2013 end Macbook pro is not start after the apple logo appears

    After the last update for mac OS, the laptop is not initialized. It shows the apple logo and the startup chime and stays there. Only I can enter without a problem for running the diagnostics by using Option d. diagnosis

    Try to start in safe mode by pressing SHIFT held your computer starts, if this fails, reinstall the system with recovery.

    On OS X Recovery - Apple Support

  • Why my iphone 6 more stuck with the apple logo and the black screen after the factory reset?

    I'm selling my iphone 6 Plus I did a factory reset, but it has stuck on a black screen with the white apple journal for more than an hour, why what is happening?

    Force the restart: press the lock and home buttons until the Apple logo appears again.

  • HP M9000: Black screen after the "Starting Windows" logo and the windows on the screen

    I just gave me a m9040n HP Pavilion Elite with a Q6600 CPU, graphics card ge force and two 500 GB HARD drives in.

    When I starts it up it seems to be ok the HP blue screen will lights up at the start of the BONE and displays "starting Windows" on the screen with the windows logo. and then it goes to black with just the cursor on the screen. (Vista) So I know WHAT BIOS is ok, the graphics are windows allowed from.

    I went to the HP system F11 recovery and he seems to think that all is well... Very confused ideas?

    Thank you, Glenn...


    It looks like one or more of the boot loader files has been corrupted.

    You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.

    You will need to create something called a CD-ROM of repair of Win7. This will repair the boot loader files, and if that is the problem, your PC will start OK after that.  Yes, it's for Win7, but Vista uses the same bootstrapper, so you can use Win7 to repair the Vista bootloader files.

    The file you need can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/

    When you download this file, it will be an ISO file.

    To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/

    Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.

    To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/

    Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.

    Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html

    You will probably need to run Startup Repair three times for him to fix all the boot loader.

    Once completed, your PC should start OK.

    If it isn't, then some files of the operating system has also been corrupted and the only way to fix it would be to perform a system recovery - which if F11 does not work, but a recovery from the PC to its original using recovery media state.

    Problem there is that HP no longer wears a recovery media for the Vista PC, so you should check to see if these sites still have it: http://www.computersurgeons.com/ and http://www.restoredisks.com/

    Good luck
    I'm a volunteer and I do not work for, or represent, HP.
    If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
    If my posts resolved your issue please click "accept as a Solution.

  • Cannot start. Reel and the Apple logo just hangs

    Thanks for reading.

    I have an iMac that is 2005 - according to me. 1 TB, 4Gb, upgraded to Core 2 Duo.

    By turning the Mac on the logo Apple appears and the wheel turns - and that's all.

    I tried all the boot options like shift, C, T, command-R + P, etc etc and get still everything is the same. (after the sound of ding). I also took the drive and connected to an external caddy and then my Macbook Pro via USB. I can see all the files fine. Only, it does not start within the Mac. I'm afraid I don't remember which version of Mac OS X, it is sorry, but that's all that the last date and maximum was for this computer with core 2 duo.

    Is it possible to reinstall the boot sector?  (I'm talking about PC jargon, no idea if this corresponds to the iMac)

    Any help / suggestions would be appreciated.

    Thank you

    A 2005 iMac can't run Mountain Lion, which is the community in which you posted your question. It could either be a Core 2 Duo because they were not established until 2006. So, please you get made lined up for use. What is your actual hardware and what version of Mac OS X is installed on it. Then we can get to help out you.

  • frozen computer and now it is black screen after Windows Update

    My computer automatically starts an update of Windows today and it has been locked or frozen for 2 hours. All I have now is a white screen. What should I do?

    (written on my iPad that works)

    Crashes Windows or freezes

  • Black screen after the start in HTML5 BB10 app screen

    Hi, Im having a second black screen 3 after the splash screen, is anyway to fix this?

    Thanks, astanley, I managed to work around it by allowing the second startup screen show all in charge of the first layout

  • Problem with the iPhone OS. Have to restore it several times and it now has white screen flashing with Apple logo

    Got my iPhone SE a little over a month since the Thailand of the Apple Store.

    First he couldn't restore entirely made from a backup so I had to delete all data and content then restored again. Then try to restore from a backup, still have problems (apps froze, failed to synchronize all of the apps, then tried to shutdown phone and glued on white background with the Apple logo).

    Try to third, I put my phone in recovery mode and restore as a new iPhone. All original content is now gone. Should it start again.

    Then small annoying problems occurred. For example, I could not find applications in the App Store, could not download new free applications, could not buy music on the iTunes Store app. It seems that Internet was frozen, when in fact it works always fine when try browsing on Safari. Facebook froze and could not push Home button to close App game graphics making static sound glitches but always disappear when him restart the application. Can't post photos on a social media application because my whole library of photos seems to be empty, when in fact he was always there. When I was taking pictures, the preview images were extremely blurry, and when checked in Photos app there is no trace of this photo that I took. I tried to close all the applications and open it again but the problem still persists. So I close the phone and restart it just to find that it stuck on the white screen with the Apple logo once more. Then, I took the phone to the Apple service provider. They restore the phone as a new iPhone for me and I had to start over once again. Only 4 days after this, my iPhone application suddenly found me a new unlock access code within 60 minutes without reason. I have to reset hard to solve the problem. And after that, the same day, my iPhone starts to blink on and outside and sometimes the white screen with the Apple logo appears.

    Whenever I said my problem of staff Support from Apple or the Apple service provider, they told me that it was a software problem. How can I when I do all these problems again and again from the beginning until now? Can anyone suggest me the right way to solve this problem? What problem do you think it's from? I can't take this anymore. I need a good show, not working iPhone undesirable. I can't keep it restore/reset/reboot over and over again like this. Please, help me.


    You can watch some of my problems here on Youtube > >

    1 screen kept flashing white background with the logo apple and restart and turn off by itself. Sometimes I can go past lock screens, but it only last a few minutes, then it starts all over again > > https://youtu.be/tfygV57NmmY

    2 message when my phone push me to reset my unblocking reason code > > https://youtu.be/a_AKPWxfAfs

    3 static glitch sound on the Sims Freeplay game > > https://youtu.be/qw12RZ4yMqc

    Take it to an Apple Store for the assessment of the guarantee.  If you have restored to factory settings, and these problems persist, there is a hardware problem, no matter what you' re said.

Maybe you are looking for