iPhone will not be displayed in the finder

I'm trying to move some of the photos from my phone to a file on my computer and my phone will not be displayed in the tab "currencies" in the finder. It's an iPhone 6 and it is connected through the USB port. I know this isn't an error connection because when I plug it in it costs and is trying to import my photos in the section 'photos' from my computer. I went into the settings in the finder and all turned on and it will not always be displayed. Why is this?

Because Apple has decided that OS X is smarter than you and me. They removed this option on the latest versions of Mac OS X (my devices do not appear more, grrrr...). Try instead to use Image Capture and import or remove photos from there.

Tags: iPhone

Similar Questions

  • My hard drive will not be displayed in the Finder, please help!

    I tried several options to try to solve my problem, but it is not good. I have an external hard drive Seagate 2 to. I used it for about 6 months, but one day it just does not appear in the Finder more. I checked in disk utility and it shows up there, but it is labeled as "Uninitialized 2 TB Windows NT specifien". It seems strange, that it now says Windows when I used it fine on my Mac in the past. It won't let me hit mount either. Please help me.

    Thank you.

    Did you have the Seagate utilities or any installed third-party NTFS software? The drive has never been formatted to support OS X?

    Connect the external drive and OS X Terminal, after the release of

    diskutil list

  • Western Digital external hard will not be displayed in the Finder or disk utility

    So I am certainly not the most tech-savvy person ever, but I'm not completely helpless on a computer, and I'm trying to help a friend with pulling content on an old external hard drive Western Digital (product No: WDBABW0010BSL-00;) ( http://www.amazon.com/Western-Digital-Passport-Portable-External/dp/B003DC8D8I).

    Initially, I looked in the Finder for the hard disk appears, but nothing has ever, even after 15 minutes to be connected. After that, I went my utility application of disc to see if something has shown there, but again, no luck. I made sure that the micro-usb cable works, who he was and the hard drive itself did a light which is turn on, plus you can feel physically the disc rotates inside the hull to the touch on the case itself, so I know there is be able to get on the external hard drive.

    From this point, however, I am at a loss for what to do next. I read some of the other help topics, but I have not found anything like that, but that works for me.

    Thanks in advance for your suggestions and help!

    Have you tried this WD drive in another Mac with the same results?

    How old is the drive?

    I know that I had a problem once with a WD drive that had this type of behavior, and I could not use any utility software disc 3rd party on it to retrieve files or disk to repartition/format utility there. The drive is running but not visible anywhere on any Mac. My situation is that the drive had nothing of value to this topic, I used a top hammer so that nobody else could get something on it when I threw it in the trash.

  • iPhone will not be displayed on the new itunes

    After doing an update itunes is more rechaussaient my iphone when it is plugged in, anyone else having this problem?

    Note you posted in iTunes for Mac forum.

    You have restarted your computer?

    If iTunes does not recognize your iPhone and iPad, or iPod - https://support.apple.com/HT204095 - https://discussions.apple.com/message/29983567#29983567

    Restart the Apple Mobile Device (AMDS) on Windows Service - Apple-Support - https://support.apple.com/HT203188

    Troubleshooting problems with iTunes for Windows updates - https://discussions.apple.com/docs/DOC-6562

  • Distiller 4.0 will not be displayed in the topic of my printer (XP)

    Hello

    This isn't the right forum, but I couldn't find one that applied because I use XP and my system and SW is old but still works fine.

    I was deleting unnecessary files and deleted adobe pagemaker 6.5 which unbeknowst me deleted Adobe Distiller 4.0 that came with it.

    I love Adobe Distiller 4.0 because I can make a .pdf of what either.  I often use it to make a PDF on a Word, Excel, and even Web pages.

    I reloaded it, but it will not be displayed in the printers section.  Basically, I go to print something and choose the option to distil instead of my printer and it would create the .pdf.

    I was wondering if someone could help.  I don't really like to download any free .pdf decision-makers because I really liked how distillation works.

    Thank you.

    Paula

    To clarify a bit for you (I don't know which Acrobat Distiller 4 was designed for, but probably 4 or 5). At that time, there were 2 distillers that caused confusion. One was the printer driver that you are talking about and the other was in the program. The print driver was actually Setup to run Distiller in the background, where the name of the driver. In current versions, the driver was renamed the Adobe PDF printer. This may have been distributed as part of package PM that you had, but I don't think he was probably part of the packaging itself, but an add on. You should seek an additional part of the distribution to install. In addition, you also probably have Acrobat Distiller installed program and be available in another program in your system.

    When properly installed, you should have, the pilot program of printing and AcroTray.exe running in the background. (Listed under Acrobat Assistant a few announcements at the beginning of the program) is a program that runs in the background to allow the print driver send print file (.ps file) to send to distill the PDF creation to complete. All three should be there. You can check if you have an Acro... or such driver in the System32 folder. That would be your printer driver is needed.

  • Before and after Image Slider widget will not be displayed in the lightbox display composition

    So my project involves a major project gallery page containing several compositions display lightbox that trigger when click.

    For some reason any when I add the widget before/after Image Slider Muse - Themes in the lightbox, the widget will not be displayed on the preview or Chrome.
    Please help me and thank you.

    You will need to contact the Support of the Muse-themes to see if it is compatible for this purpose or if it is possible.

  • Themes from browser will not be displayed in the iPhone app

    I created a few themes for a project in color.adobe.com (signed on my account) and went in my iPhone application (also signed on the same account) and attempted to access topics in the tapped app sign, creative cloud, 'my library '. "My library" has old themes, but the new will not be displayed even after dragging down to update. I tried to 'release' themes, but that does not work.

    In fact, now I notice only three of the seven themes of the mobile library are appearing in the browser. Y at - it a setting to synchronize? I am very confused.

    EDIT:

    OK, so apparently they were saved in "my themes. Which begs the question, what is 'my library'? Is it a vestige of the front changed spelling of Kuler Color and deleted everything? How can I save my themes just in folders and not to attempt to navigate the labyrinth of libraries, topics, files and some other subsections of the themes repeated I have? I'd like to organize all my themes and sync between all my devices, but... I am so baffled by all this.

    The color.adobe.com undergoes a lot of changes to manage the themes of color in a more meaningful way.

    Once this is done, the themes in the web and mobile applications will be synchronized.

    HTH,

    Vivek

  • My programs on the creative cloud will not be displayed in the extensions Manager.

    Hi I am trying to install an extension for Flash, but it will not be displayed in my extensions Manager and will be one of my other programs.

    I try to install the image key Caddy Pro extension and it says to go to Windows-> Extensions-> keyframe Caddy, but I couldn't find where it says to install it manually with the extensions Manager.

    Here is a picture of my extensions Manager:

    Extension Manager photo.PNG

    And this is a picture of my creative cloud:

    Creative cloud photo.PNG

    Is there a way to make my programs appear?

    Thank you, Christian

    Dear Christian

    It should not be used today. Please see this link: Adobe Exchange

  • My newly created model swatch will not be displayed in the swatch Panel

    I created a model of plaid and dragged to the swatch group. When I tested, I realized there is some error so I deleted the swatch in the swatch Panel, then edited my original (created a bounding box with no fill, no stroke and sent to the rear). When I try to drag the new model highlight in the swatch Panel, this time that it will not be displayed; But if I create a new shade of single color it will be. Help!

    I had the same problem, but the answer by Monika helped me to understand the problem: I divorced from all elements in the model, then checked each one in the appearance Panel. I discovered that I had inadvertently forms filled with a pattern. When I deleted all those unwanted models of each shape and banded everything, I could record the reason as a sample.

  • iPhone will not stay connected to the internet?

    * Posted on MacRumors forums but no answers *.

    So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

    Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

    I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

    Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

    I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

    I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

    I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

    One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

    Hi pinkdolphins0400,

    Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

    The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

    If your iPhone, iPad or iPod touch connects to a Wi - Fi network

    Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

    Recommended settings for the WiFi routers and access points

    For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

    The backup of your iPhone, iPad and iPod touch

    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

    Restore your iPhone, iPad or iPod touch from a backup

    See you soon!

  • My big Hard Drive Partition will not be displayed in the Defragmenter

    So, it's weird, but when I start my derangementer disc, it will not show my 'c' drive  I have 2 drives, a 'C' drive and a drive to "D".  D is just for backup, while C is for all program/system files.  Then, of course, C must defraged for the computer normally elapse.  Does anyone know a good work around or if I can re - install disk from somewhere Defragmenter (please include the link to all sites if you have a method of re-installation). Also, I tried planning as a task and C will not always be displayed.

    Hi DanSiroky,

    Windows that reports using its built-in algorithms and these standards, drives
    do not defragment. However, there are other commands to change how the Defragmenter
    reorganizes the files on the disk. 3rd party tools can also be used for added functionality and/or
    different methods for the arrangement of the file.

    Take a look at the links with a similar question.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Disk-Deframenter-not-working-opening-in-Windows-7/90ff4b35-8086-4A80-bc48-0d8e4fc6d758

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-defrag-system-shows-5-fragmented/7101a9ee-F163-4176-8F19-85b7d6e48ce4

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/defragment-program-does-not-show-my-c-drive/304a2323-5771-4545-94c4-18982bd0f81e

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/how-to-defragment-disks-in-Windows-7/949c847b-b1fb-445C-8445-8734ef91f17f

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/c-drive-does-not-appear-in-Disk-Defragmenter-after/4a121b3e-530b-4f4a-a6d1-66235cb1301f

  • The effects will not be displayed on the Rectangle

    I work with Illustrator cs4. I'm doing a flyer to be printed and saved in PDF format. I drew two rectangles with the Rectangle tool in the context of the simple design. I have their color and then applied the effect water effect paper > Photoshop - Sketch effects. My boss would like rectangles of a different color. When I change the color, the effect is no visible solitaire, except on the edge of the forms. The effect still appears in the appearance, under Fill Panel, however. When I change the color on the back, the effect is once again visible. I can add the effect to all rectangles drawn in this color. All rectangles drawn in other colors will not display the effect more often at the edge of the form. What happens in the world, have I done to make this happen?

    In the options of paper water decrease the setting of the brightness to about 46.

    That should cure your problem with the Green object.

  • CDAQ-9139 StandAlone will not be displayed in the MAX Host computer using Ethernet cable

    cDAQ-9139 will not appear in computer Max Host. Portable time controller and host running NOR-DAQmx worm 9.6. Can test both directions and cDAQ-9139 appears in the browser on the host computer which is connected to the cDAQ-9139 via cable directly thru cable OR network Ethernet. Host a no anti-virus and firewall is set to off.

    Ah, thank you, sfrosty.  I think I understand your Setup now.  You are running Windows 7 on the computer laptop and WES7 on the cDAQ-9139.

    In this case, you must program your application on or deploy an executable compiled directly on the cDAQ-9139.  There is no way to use the laptop to program for and deploy a LabVIEW application to the cDAQ-9139 system.  Instead, you may want to use remote desktop to access the system of cDAQ-9139 directly, or you could fix a computer, keyboard and mouse for the cDAQ-9139 screen and use it as an onboard computer.

  • Aspire VN7 - 791G: SSD will not be displayed in the BIOS

    Hello

    I bought this SSD for my VN7 - 791G https://www.amazon.fr/gp/product/B016DR1MBE/

    But it does not appear in the BIOS.

    Could you tell me if I bought the right one?

    Thank you

    Mickael.

    Hello

    791G does not support the is or looks like. As other people have said on this forum that the SSD will not work because is a SSD is. You need to buy one that is compatible SATA like this for example: https://www.amazon.fr/Samsung-Evo-SATA-250GB-MZ-N5E250BW/dp/B00TGIVZTW/ref=sr_1_1?s=computers&ie=UTF...

  • Smartphone Ringtones blackBerry will not be displayed on the device, but are on my card.

    I put mp3 ringtones on my 9530 via Media Manager in Desktop Manager 5.  I did several battery grips and the tones I put on it will not show up in my ringtones.  I put them on the map of support and no device.  I tried a second time and two of each tone appear in the Media Manager, but not on the device.  I had this happen before, but usually a battery pull fixes the device.  Help please.

    Hello

    Go to the hidden file /ringtones show and remove the BBTHMBS. DAT file it as an index to theBlackberry file.

    Traction battery, let the device reindex and see if they appear.

    Thank you

    Bifocals

    No data will be lost when you do the following: remove the battery while the device is activated.
    Remplacer replace after one minute, let the device reboot 1-3 min, see if the problem is corrected.

Maybe you are looking for