Iphone6 more does not illuminate

Similar Questions

• My iphone6s more does not give me the option to use live wallpaper and also direct mode for the camera application icon will not be displayed.

  IF I want to use my function Live Photos, but I noticed that the live photo icon does not appear. So I went to see if I could use the feature live wallpaper and it does give me a feature live wallpaper either. I have the IPhone 6 s more. I just want to know how activate it really want to use the feature live picture, thank you.

  IS your phone mode low power?

• Hi I have avg 2011 free add. Some components are on but the antivirus and a bit more does not illuminate. I click on update, this is the error I clicked fix says it all, but also failure update?

  I, m Bob a ball came saying that the firewall is disabled, I went in ave and tutned it then I am I at risk because the antvirous is disabled and I did everything I could do to try to turn it on but can't find anywhere that it says to turn under. all this happened when I turned on wall of fire and all the fix get faild. ???

  Hello Bobtopper,

  What is the error message when you try to market the AVG antivirus?
  You turn on the AVG firewall or Windows Firewall?

  If you are having problems with AVG antivirus and you want to uninstall, you can download the Microsoft Security Essentials, which is downloadable for free. Security Essentials provides anti-virus, anti-spyware, anti-malware, etc..
  You can activate the automatic updates if you do not have to worry about updating the software.
  Click here for a link to download Microsoft Security Essentials.
  http://www.Microsoft.com/security_essentials/

  It is not recommended to have more than one antivirus installed because it could cause conflicts in the operating system. If you decide to use Microsoft Security Essentials, you will need to uninstall AVG Antivirus and remove all previous AntiVirus software before installing Security Essentials.

  Please reply back and let us know if we can help you further.

  Thank you

  Marilyn

• iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

  iPhone 6 with iOS9.3.4.

  WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

  You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

  Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

• New Ipod Touch does not illuminate

  Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

  Try the following steps:

  1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
  2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
  3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
  4. Be sure to contact the Apple support if you need more help.

  Good luck!

• Help my extensa 4420 does not illuminate

  I have a laptop Acer Extensa 4420 2009, that does not illuminate.

  He sat for 4 months unused. Don't work on battery power (15 min max)

  Finally bought a new battery.

  When I press the button start is there no response.

  I checked the power supply: good 19.1 V dc

  I have a new battery.

  When I plug in the power supply, I get the fire A GREEN on the incicator of battery charge.

  I tried the static reset: remove the battery & power supply, press on & hold start for 30 seconds.

  I deleted & reset memory modules RAM (2 x 1 GB).

  I opened back and reinstall all connections of Ribbon & connectors, hard drive etc.

  Last fall it's intermittent start up, I replaced the cmos battery, that fixed.

  Could use some suggestions where to look next.

  Mike D

  Problem SOLVED:

  I did more reading. Find more on the reset procedure.

  (1) I unpluggged the battery & left overnight.

  (2) in a hurry & has held start button for 1 mniute.

  (3) to replace the battery (new) & start-pressed: the UNIT POWERED UP!

  I am trying to load updates.

  Microphones

• I need help, its frustrating me! network discovery does not illuminate.

  my network discovery does not illuminate. Whenever I try to turn it on I get an error message that says: (the specified service does not exsist as an installed service)! I need to elp, its frustrating me! I have windows vista.

  Hello

  Did you change your computer?

  Method 1:

  Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

  Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
  1. click on start, type firewall and then click Windows Firewall with advanced security.
  2. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP) - in the list.
  3. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
  4. apply the changes and check the result.

  For more information about network discovery, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discovery

  Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
  1. Click Start, type services.msc and press to enter.
  2. from the list of services, double-click the service computer browser and TCP/IP NetBios support.
  3. change the startup type to automatic and start the service.
  4. apply the changes.

  Method 2:

  Now we go ahead and try to enable the discovery of the network on your computer and check for the issue.

  Network discovery is disabled by default for public networks. Changing a network location type to home or work is the best way to turn on network discovery. To learn how to change a network location type, see Choosing a network location. To enable discovery manually, follow the steps below.

  To turn on network discovery

  1. open the network and sharing Center by clicking the Start button, clicking Control Panel, clicking Network and Internet, and then click Network and sharing Center.

  2. If network discovery is off, click the arrow button expand the section, click turn on network discovery, and then click on apply. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  I also suggest you turn on discovery of the network link and check.

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-network-discovery

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Windowns Defender does not illuminate

  Windows Defender does not illuminate

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• HP Mini 210-2070NR does not illuminate

  The computer was running and makes a funny noise - perhaps the disk is going bad?

  I watch yet, but when I looked, it was off and the led 'works '.

  has been turned off, and the computer does not illuminate.

  How can I determine if the drive is bad and if so, how to replace the drive (and the operating system 7)?

  Any other ideas why it doesn't turn?

  Hello RayVoith,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop does not light, and I'd be happy to help you in this case!

  To turn on your computer again, I recommend the rest of this paper on computer won't start (Windows 7, Vista, XP). This should help to turn on the laptop.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Color Laserjet 3500 does not illuminate

  Hello, I have a HP Color Laserjet 3500, that does not illuminate. I replaced the power supply and the DC controller, but still nothing. When I hit the power button blinks the led on the Board of trainer, but that's all. The fan does not illuminate. Any suggestions?

  Hi oodletoodle,

  Welcome to the HP Forums!

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/

  I hope this helps!

• Photosmart C309a does not illuminate and its power adapter 0957-2259 LED flashes.

  I have a Photosmart all-in-in-one C309a.  A few days ago I started to receive messages from the ink system dailure, with the 0xc19a003e code.  I followed it to corresponding to a unit of printhead failed, so I ordered a replacement parts HP UK store on Friday, October 14, and it came today, Monday the 17th. Great rotation of the order of HP UK - thank you.

  When I came to adapt to the new print head today, the printer does not illuminate.  No sign of the power of the power button, the buttons command or display.  The power adapter (model number 0957-2259) has a green LED which was (and still is) very quickly - flashing several times per second.  After that the power had been in the power adapter for a while (several tens of minutes I think, I wasn't timing it) noise started coming from the inside of the printer.  It is a kind of regular knocking and seems to echo the led blinks - but there was still no sign of power - including no movement of the ink/printhead assembly.

  I tried to find suggestions online and I've seen a few posts on some websites that suggest that the adapter can be unloaded in some way - but they are almost exclusively on the PC.  Posts read as if there is some kind of capacitor which accumulates (too) charge and discharge it restores the adapter to the operating state.

  I just reconnected the power again to see if there is no change.  After about 10 minutes, hit him coming back for a few moments then stopped.  I noticed that the LED on the AC Adpater was green fixed so I tried the power switch on the printer and it began to start.  But then hit him came back, the display panel started flashing white light and then complete disappearance of signs of life (other than sound knocking, which became intermittent, maybe 5-15 seconds each time).  The LEDs returned to.

  And then after maybe 20-30 minutes with the power, the printer finally tried to start, the light of the AC adapter / CC has been stable and my computer thought that the printer was (briefly) online.

  But the adapter light started blinking and now the printer behaves as if it has no power.

  It seems to me that the symptoms is due to a problem with the AC adapter.  Then

  (A) that seems reasonable?

  (B) is there a way to release or otherwise 'fixing' the adapter?

  or (C) is it better/more safe to replace the adapter?

  TIA,

  Chris

  The adapter can be reset as described here.

• Interruption due to the light wireless wireless connection does not illuminate

  I have a 4330 s HP's Probook

  I can't connect wireless in reason, wireless led light does not activate, I don't know if I need a driver, but I guess that all drivers are real.

  hope someone can support me in this case.

  Thanks in advance for your support

  Original title: wireless connection

  Hello Ruka,

  Thanks for choosing the Microsoft forums.

  I understand that you can not connect to the internet using the Wi - Fi connection on the computer.

  I would like to know some information about the problem so that we can help you further.

  You did it all change hardware or software before this problem?

  Try the following and see if they work for you.

  Make sure the wireless, as the function key switch for the wireless is turned on. Please refer to the user manual that came with the computer.

  Method 1.

  Try to use the network for Windows 7 troubleshooting:

  http://Windows.Microsoft.com/en-AU/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2.

  Please try to look in the Device Manager for any exclamation point in Device Manager.

  Check the network card

  1. click the Start button picture of the Start button, type "device manager" in the search box and then in the list of results, click on Device Manager. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2 expand adapter option and then check for any point of exclamation.

  Is there an exclamation point on found network adapter, then we troubleshoot the missing or corrupt wireless drivers. And we must also update the latest driver wireless from the manufacturer's Web site.

  To install the latest drivers for network adapter from the computer manufacturer Web site:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_bd9b6997fbc7fc515f4cf4626f5c8d01=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.tpst=bd9b6997fbc7fc515f4cf4626f5c8d01&sp4ts.oid=5045451&ac.admitted=1393314132234.876444892.492883150#Driver

  Method 3

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 4.

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-7

  Additional information:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows/cant-connect-Internet#1TC=Windows-7

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/wireless-networking-FAQ#1TC=Windows-7

  Wireless light does not illuminate

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/wireless-light-does-not-turn-on/TD-p/894811

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

  Thank you.

• Z22 does not illuminate

  First time here.

  I have a Palm Z22, that does not illuminate. I was playing solitaire on a full battery, a minute. Turned it off. Came back to it no more than 10 minutes later and can't get an answer at all. I tried to load it with a wall charger - even though I know that the battery was full - but still no answer. I'll try to plug it in to my computer then, but I don't have a lot of hope here. In the meantime, I hope that someone here has a great idea.

  first try restarting hot if it will feed.

  Push the reset hole at the back using a paper clip.

  Message is about: Treo 680 (unlocked GSM)

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• My MacBook Air does not illuminate

  MY MacBook Air does not illuminate?

  Nothing happens when you try?

  Power light?

  Tones? Startup chime?

  If you connect to the charger, which is LED color on the card?