iPod 4th generation not recognized when connected to a USB port.

Similar Questions

• External 2.5 "HDD cannot be recognized when connected to the USB port

  I have a Toshiba drive aluminum 2.5 external hard "which is not quite 1 years old yet and my pc is no longer picking up as a hard drive, I tried it on several other PCs then it goes blue after about 30 seconds, but still nothing happens

  Can you let me know what I need to do?

  Kenney

  Hmm, looks like a HARD disk crash
  Eventually it s a HARD hard drive work if the HARD disk access is not possible
  This damage of s and I doubt this is repairable ;(

  In my option, you will need a new HARD drive

• Devices not recognized when connected to itunes from a PC. Recently upgraded to windows 10 and appears there is no driver

  I'm sure that this request has jumped several times. I've recently upgraded hardware and software being windows 10. All devices being Ipads, Ipods and Iphones are not recognized in iTunes once connected to your PC. The PC is to recognize that a device has been plugged in with the usual beeps. I've seen drivers and it seems that usb iTunes etc is not listed. How this can be fixed. Thank you inadvance for advice

  Hello, Aubin Grove,.

  Thank you for using communities Support from Apple!

  I understand that your iOS devices are not recognized by iTunes when you plug it into your computer. There may be two different causes for this type of situation, but we have some great troubleshooting to help you resolve this situation.

  To begin the process of diagnosis, I would suggest reading over and working through the information mentioned in the following article.

  iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  See you soon!

• USB device not recognized when connected to the computer

  original title: USB port problems

  When I plug a usb device, I get a message not recognized usb device (one of the usb devices attached to this computer has malfunctioned and windows does not recognize)

  Hello

  ·         Since when are you facing this problem? Were you able to use this USB device on the system before?

  ·         Remember to make changes to the system?

  ·         It happens with all USB devices that try you to plugin for the system?

  I suggest running the fix which is present in the article below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Also, I suggest you return the item mentioned below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• USB device not recognized when connecting to printer

  Hello Microsoft,

  Hear I have problem in my PC. I connect to my new printer (RIOCH SP 100), but in my Winodws7, they show me that your usb device is not recognized. I try to use the resolution of problems. but it was a failure of dem, so now what is the way to solve my query.

  Hello Dhruv,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the complete model of your printer RICOH SP 100 number?

  Thank you for details on the issue.

  This problem may occur because of settings and corrupt device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Please also run the printer Troubleshooter and check.
  Reference:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  If this does not help, use method 2.

  Method 2:
  Controllers USB reinstall and check the issue. Please follow these steps:

  a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

  (b) in Device Manager, expand 'USB Bus controllers'.

  c. right-click any device under "Controllers of Bus USB" and click Uninstall.

  d. repeat the same steps for other devices.

  e. Once completed, restart the computer.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• My keyboard is not recognized by windows when connected to the USB ports.

  My keyboard is not recognized by windows because that is malfuncioned or something else, that's what I get a message when I insert the keyboard to the usb port that could do because the ports are fine.

  Original title: keyboard problem

  Hi Caragata,

  Perform the steps from the link below and see if it works.

  Tips for solving problems of USB devices

  Note: This article also applies to Windows 7. If the fix it does not work, you can then run the built-in utility.

  Good day!

• Mobile gamepad XBOX 360 not recognized when connected to a Windows 7 64 bit Home Premium computer USB ports

  Very well - so a few days ago (Saturday ~ 2) (25. 2012) I connected to my XBOX 360 (Wired) controller on my Toshiba Satellite L655 computer laptop with Windows 7 ~ Home Premium 64-Bit. To my surprise, a Notification bubble popped up from the taskbar, saying that the "unrecognized USB device. It has malfunctioned. "

  Naturally, I took, waited a few seconds, and then reconnect the USB key. The same message has popped up. Now, I was angry. Repeatedly, I took and reconnected it all a few seconds until that FINALLY the 4 green lights around the button Guide everything illuminated and then back except the one on the upper left, which was the way it should have been.
  I went to the control panel and clicked on the 360 controller to see if he had any input. Nope.
  I pulled out once more, has waited a while and plugged in. No, lucky. The same thing happened again. The Notification bubble came, all 4 green lights on and then all four of them died. I don't know what happened.
  When I plugged the controller to the laptop the FIRST FULL TIME, he installed all necessary drivers in less than a minute and I was on my way. Every time after that, I have taken the controller into the USB Port and began to play. Now all the time, that is to say that it cannot recognize the controller?
  I've tried everything, even a system restore. Nothing did. I've uninstalled and reinstalled the drivers for a few minutes, there was an entry of the controller, then he went just blank.
  I need this controller in order to play my racing games, seeing the keyboard control just aren't the best. I don't know what the problem is, but I wish I had a solution A.S.A.P. Please, Microsoft, please. Help me!
                                                                                                                          
  
  
  
  

  I had the same problem, cannot find a solution that worked everywhere, including Microsoft support forums.

  About to give up, I remembered the old cure NDA, shaped, "why not?"  I've tried everything else. "So I've disconnected everything on the gamepad, blew in every connection and reconnected everything, by ensuring that the connections were tight.

  It has worked perfectly since then.

• By getting Unattended.XML file not recognized when booting from the USB key dvd

  I have prepared without supervision. XML file and put it in the root of the USB stick and kept Windows 7 OEM DVD player. Mentioned the path of the file catalog in unattended mode. XML. active all USB ports in the BIOS settings. But without surveillance. XML file is not acknowledged at the start. What could be the possible problem here? Can someone help out me?

  Hello

  Please contact the Microsoft community.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/Windows/en-us/82410df7-2e70-47C7-a9dc-7dba7c17fbf8/autounattendxml-will-not-load-from-USB-HDD?Forum=w7itproinstall

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Not able to connect to Wifi, USB ports, bluetooth

  Hello team

  I bought the new HP laptop today. I have installed Windows 7 OS. I am not able to connect to Wifi, not be able to use the blue tooth, not be connected to the USB. I downloaded the drivers from the website of the other computer. But how can I install it with one of them works. Please help us on the question mentioned.

  Product number: G8D85PA #ACJ

  Thank you

  Sunil

  Hi Sunil_motukuri,

  Thank you for visiting the Forums HP's Support and Welcome.I would be happy to help you. I read your thread on your computer laptop 15-g030au HP and who need wireless for Windows 7 drivers. Here is a link to the drivers.

  Hope this helps you.

  Thank you.

• USB device not recognized when connected to Toshiba Port Replicator II

  I recently bought the Replicator above, loaded the software, restarted my computer and only then connected the device according to the instructions.

  I get the error message "unrecognized usb device".
  When I go in my gear and check for driver for this device 'unknown' told me that no drivers have been shipped for her

  So my Replicator does not.
  I deleted the software and reloaded with the same result

  I have a laptop Tecra A8 running Windows XP Service Pack 2
  Any help or suggestion would be appreciated

  As much I know PortReplicator II only is not supported for Tecra A8. According to the sustained specification is Port Replicator III + only.

  If you try to use the option not supported, it is not easy to give any help.

• error code 43 usb not recognized when connecting usb (sd card) with asus X55C laptop.

  Hi, I'm 43 error code while the plugin my usb card with asus computer laptop X55C. I tried several methods indicated on the window on the error code 43 site but I have not any solution even took me out of my laptop battery usb recognize, but it did not work. I uninstalled the Device Manager usb driver, but it also does not work please help me.

  Hi Daman,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur is because of corrupted USB drivers or incorrect settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  If this does not help, use method 2.

  Method 2:
  Download and update the chipset and drivers USB of your computer from these links and check the issue.

  Driver Chipset
  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=117&m=X55C&OS=30&ft=23&F_NAME=Chipset_Intel_Win7_64_Z9301020.zip#Chipset_Intel_Win7_64_Z9301020.zip

  USB driver
  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=117&m=X55C&OS=30&ft=22&F_NAME=USB3_Intel_Win7_64_Z103214.zip#USB3_Intel_Win7_64_Z103214.zip

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• iPhone not charging when connected to the USB power adapter

  Hello. I have a 5 s iPhone that I bought used a few months ago. It works very well.

  Normally I charge it by connecting it to my Mac via a USB cable. Last night, I tried to recharge by connecting Apple USB power (also called a power outlet) adapter, which plugs into the wall, supplied with the phone. (Here's a link to the adapter if you are not sure what I'm talking about:.) When I connect the iPhone to the power adapter, I saw that the phone is charging - there was the small icon representing a lightning bolt near the battery of the iPhone.

  However, when I woke up in the morning, the iPhone has been charged only 47%. I don't remember what the percentage was when I plugged into the power supply last night, but I don't think that the phone at that time was much less.

  So I wonder: nobody knows what went wrong? Is there a way to make sure that the phone is loaded with the adapter?

  Thank you!

  M

  If there is a symbol of bolt of lightning next to the battery icon, then the phone should be in charge.  If it is charging a single source, but not another, then the problem is with the unpaid source.  Try another adapter to confirm.

• How will I know if my mini ipod 4th generation is in charge? The blinking not solid.

  How will I know if my Mini Ipod 4th generation is in charge.

  I plugged it in - the blinking not solid.

  It's an iPod shuffle, right?  Small place with design clip - on and no screen...

  Blinking light means DO NOT DISCONNECT, because the iPod disk is mounted by the system.  EJECT iPod (in iTunes) before physically disconnect the iPod.  If you eject , but leave it connected, the light becomes solid.  (Yellow or green) light means OK TO DISCONNECT.  When it is yellow, the battery charge.  When it is green, the battery is fully charged.

  NOTE: In the normal conditions of use, flashing light is always yellow; It's supposed to be a warning.  It does not indicate the State of the battery; never it flashes green.

• We get the popup "USB device not recognized", when nothing is connected.

  Original title: pop up message

  I connected the USB cord to transfer information from your old phone to new phone via Itunes.  Since that time that I keep getting a pop up message that says: device not recognized USB, the defective device, windows does not recognize.  Nothing is plugged in, but message appears every few seconds.  How can I get him to stop?

  Hello

  It seems that you are getting the popup "USB device not recognized", when nothing is connected.

  What is the brand and model of your computer?

  I suggest to uninstall the USB controllers and check if you get the context menu.

  
  

  Method 1: Remove and reinstall all USB controllers

  
  

  a. clickStart, type devmgmt.msc in the start search box and press ENTER.

  b. expandBus USB controllers.

  c. right-click on each device under theBus USB controllers node and then click Uninstall to remove them one at a time.

  d. restart the computer, and windows will install the rear USB drivers.

  If reinstalling USB host controllers fails to resolve the issue, go to method 2.

  Method 2: See the procedure suggested by johnkelly46 responded on October 26, 2009, from this link.

  If you have additional problems, please reply to this post and we will be happy to help you further.

• New Ipod nano is not recognized on laptop

  Bought a new Ipod Nano (my old one fell; broken screen).  I have the latest version of ITunes on my laptop HP Envy.  My sync iPhone without any problem. my old ipod nano also syncs.  A did the device synchronization Tests. Results: No Ipod Touch, IPhone or Ipad found.  I can also scroll to the clock and the parameters of the IPod Nano. I need help from the community before I call Apple.  Thank you

  Hello pamelafromsonora,

  Thank you for using communities of Apple Support.

  According to your post, I see that your new iPod nano is not recognized by iTunes on your Windows PC, and you cannot scroll through the settings of the clock on your iPod. I know how it is important to ensure that you can connect your iPod to your computer/iTunes and use all the features. I'll be more than happy to help you with this.

  Use the article If iTunes does not your iPad, iPhone or iPod and follow these steps to see if iTunes recognizes the device, specifically these sections:

  When iTunes on your computer doesn't recognize not the connected device, follow these steps. Try again after each step:

  1. Make sure that you have the latest version of iTunes that works with your computer.
  2. Check that you have the latest version of the software on your Mac or your Windows PC.
  3. Make sure that your device is turned on.
  4. If you see a trust this computer alert, unlock your device and press trust. If you still see the alert, you may need to reset your lockdown folder.
  5. Unplug all accessories USB from your computer except for your device. Try every USB port to see if it works. Then try another USB Apple cable.
  6. Restart your computer and your iPhone, iPad or iPod.
  7. To see if your device needs service, try another computer. If you have the same problem again, contact The Apple support.

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
     
  4. Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
  5. Click Next. You should see the disk button.
  6. Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
  7. Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
  8. In the disc window, click Open, and then click Next and then click Finish.
  9. Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
  10. Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

  Best regards.