iPod 5, screen lights

I was using my iPod and then I turned it off to go do something. When I came back my iPod turns on. The power button does nothing and the home screen button does nothing no more. When I hold the start tho, the Siri noise plays and I can talk to him, but still nothing will happen. When to charge my iPod it does nothing. Please help me.

Post edited by: caleb163
Grammar mistakes

Press the sleep/wake and home buttons and keep them for at least 10 seconds.

If this is not enough, take a look at these articles Support from Apple:

If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

More info here:https://support.apple.com/en-us/HT201263

If these steps do not work, contact Apple and ask for help.

https://www.Apple.com/support/iPhone/contact/

Tags: iPod

Similar Questions

  • iPad Pro screen light leaks

    I just got my new iPad Pro 9.7 128 GB. After unpacking and open the unit, I found a white spot on my screen near the front camera. It will appear only when my background is white and will not appear when the background is black. I think that my device screen light leaks. I fear it has become worse as more big white point? Help, please! What can I do?

    The United States, you can return it to Apple "without question" within 14 days of the purchase.

  • Satellite Pro M70 - stopped screen lights

    Hello

    My Toshiba Satellite PRO M70 screen lights.
    I don't know why, but sometimes when the screen is broken and I put it up it turns on, but after a few seconds it stops.

    It started a few days without something strange in my pc like hitting or something like that.
    I tried to connect an external display and it works weell.

    Anyone know why it cant pass or how fix it?

    Thank you

    Greetings

    Toni.

    Hello

    The Fn keys work?
    You can increase the display button narrowly by using the FN + F7 combination?

    Please also check the energy saving profile.
    Maybe the display brightness is set to a lower value in the power saver profile.

    But if you will not find anything unusual in the settings of the software, so I guess that the brightness display problem is related to the failure of inverter FL.
    The FL inverter controls the brightness of the screen, and this part needs to be replaced.

  • Why my screen light up only charging the battery

    WHEN IM CHARGING MY BATTERY OF MY LAPTOP, MY SCREEN LIGHTS UP BUT WHEN I UNPLUG IT, DEMS IT... HOW CAN I GET 2 STAY BRIGHT

    Hello

    You should ask this in the responses - forums for your version Windows
    Windows.

    Answers - Windows Forums
    http://answers.Microsoft.com/en-us/Windows

    ------------------------------------------------------------------------------------------------

    Control Panel - Power Options - change Plan settings - to all plans.
    Also check the 'change advanced power settings' - display.

    Keep in mind the more brilliant the screen less battery time you have.

    I hope this helps.

  • files will not open or close when I open in Vista, try opening a shortcut .exe, the screen lights

    This just startedudden there are no restore file. Files will not open or close when I open in Vista, try opening a shortcut of .exe, that the screen lights up. It really confuses me

    I would say to uninstall Norton AV software using the Norton Uninstall program.

    https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&LG=English&CT=United+States&product=home&version=1&PVID=f-home&entsrc=redirect_pubweb

    Go to Mode safe mode with networking

    Download the following tool and run a scan full to eliminate malicious software hidden in files.

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  • The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and sparkles in a pink/purple color

    I use Internet Explorer as my search engine and internet as my default msn.ca. The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and flashes in a pink/purple one color recovers to normal in 30 seconds approximately. I had an attempt of technician paid for help but couldn't. Can anyone help? Thank you

    Go to start / Control Panel / Internet Options / Advanced section then check the top box rendered = software use instead of gpu rendering / apply then OK.

    Restart all open windows ie11.

    For memory, Bing is a search engine ie11 is a browser and msn... is a home page.

    Any other number symbol use Gear and manage add-ons and toolbars and extensions and disable Adobe Shockwave element

  • BlackBerry smartphones to screen light upward for incoming

    Can you tell me why my screen lights up when I have a caller ID incoming call showing type info but it only lights up to see the incoming text or msg info.  Is - this usual?  Can I do light for both?

    Thank you

    Nick

    This is the default setting for the screen light up when you receive a call. He normally only would light up not for other notifications. However, he is there, a program called 'Aerize alerts Email' that creates small pop up alerts when you receive messages. You can check it out here: http://software.crackberry.com/product.asp?id=21671&n=Aerize-Email-Alerts---Email-/-SMS-Popup-Notifi...

  • 3rd generation ipod white screen

    I know it's old, but working well... so far.  White screen.  It is recognized by itunes when plugged into the computer.  Restored successfully on the itunes screen, always white.  Tried the fix with holding home and power button.  Tried to hold the House, volume and power.  Screen remains white.

    My question - is all hope gone and I must finally remove this ipod?  It's been great and it's a sudden death - hard to see it go.

    Thanks for any help...

    The 3rd gen iPod "classic" has a great sound.  If you tried to do a restore already, its likely to be a hardware problem, unfortunately.

    These older iPods are easier to repair because they are assembled from items separated and not so integrated and miniaturized.  My work 3rd generation iPod was reassembled broken iPods that I bought on eBay, by swapping pieces.  The screen is not the thing that is broken, most of the time.  If you are somewhat technically inclined, you can remedy.  You can post back for more information.

  • End of 2015 iMac 27 inches 5K screen lights up when the "sleep mode"

    When the iMac is in "standby", sometimes the display lights for a while and then turns back off the coast. Screen does not completely, simply turn the backlight (it's like when you see a black image with the high brightness level).

    I know the iMac turns once in while when the "sleep mode" to access the internet and such things, but I don't like the screen turn on like that.

    Is there a question?

    Thank you for your collaboration.

    Probably not a problem, but to be sure that you can post a report EtreCheckon your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

    If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

  • Black iPod touch screen, won't charge

    Hey guys,.

    So last night my iPod (5th generation) has been in charge. I pressed the home button to turn on the screen and the screen remains black, I pressed the power button as well as anything does not. I tried to do a hard reboot (hold power and the button "home" for more than 30 seconds) and the screen remains black. Now, it's hot when I try to load it. Help please.

    Have you tried to restore through iTunes? Sometimes, it's what suits him. If this job down, I think you should talk to a representative from Apple online or a Genius Bar appointment at the Apple Store.

  • Compaq CQ62 screen lights with caps lock stuck.

    Hello

    My computer compaq laptop is a month old. When I turn it on, I hear the fan, but that's all. No beeps and the only visible light is the caps lock key, which does not turn off. The screen is completely blank. No cursor blinking, no music windows, nothing. I tried to turn it on using only the stored battery power - no luck. I turned on and off several times - no luck.

    Thank you very much in advance for any advice for helping me fix this very premature!

    Kate

    Hi Kate,.

    Try the following.

    With the laptop off, remove the AC adapter and then remove the battery.  Press and hold the power button for a minute.  Plug the power adapter (leave the battery) and see if the laptop boots.

    Kind regards

    DP - K

  • Screen light sensor

    Hello, I have a problem with the Z5 perhaps compact cause automatic light, the sensor, cause sometimes the screen is quite dark same Sun and other times she keep changing the lighting... and that make it difficult to see the content. How can you trouble? Is this normal? Thank you

    Hello!! I watched the Adaptive brightness Meanwhile and I must say that it works really well, but it is so sensitive that any movement in a different direction where is the difrent brightness changes, so if I'm in a place with a few different intensities of light I need to put the mobile in the direction it's better (as I am I have a place with the light above me) (, but behind it is less the sensor takes a bit less, I hope it's a good explanation). The problem may be known as resolted on my part at this time Cheers

  • computer stuck on screen-light windows mobile bars but is not anywhere - safe mode feezes when loading drivers-system restore did not work

    Dell ionsipion 1525-VISTA OS - computer when asking to start the normallyor launch startup repair... .errors will not fix, go to the windows... page only the microsoft corporation and bar shows - lights on the bars are moving.  If I hit f8 and try to start in safe mode-sfe mode freezes while it loads the drivers - if I try the system restore, it says I have a corupt file and when I run disc chk it says all files are OK but then it asks me for another disc that i have not... any ideas

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

    And it means Dell back to factory settings if you have a recovery partition on your hard drive.

    See you soon

    Mick Murphy - Microsoft partner

  • T61 screen light screen T61P much dimmer what's happening here?

    Have a T61 with resolution max 1920 X 1200, Nvidia GPU of 140.  OS is Vista Ultimate...  The screen is very bright

    Also have a T61P with resolution of 1920 X 1200 Nvidia FX 570 M GPU max.  Operating system is Windows 7 Ultimate.  The screen is much lower.

    1. the fact that I have a higher resolution on the T61P account for the screen inverter?

    2. a dimmer screen means the backlight is bad on the T61P. ?

    Have seen the ads on Ebay for new lighting.   It looks like a real pleasure time to install a.

    Screen is not as dark as I can't read but it is much less bright than the T61 with a lower resolution.

    Also if I change the resolution on the T61P actual screen size shrinks vertically and/or horizontally.

    What gives?

    New settings BIOS display normal high and the screen on the T61P became much brighter.

    A lot of things is not easily visible on these Thinkpads.

    Wish Lenovo would publish a comprehensive guide to all parameters and pitfalls.  Would be a help to many questions.

  • Screen light

    I'm usually sitting in a room with soft light, and during the night, I keep the light of laptop screen at low setting or almost and 1 single step above to update. So I thought you could do it fix itself, if you took a quick picture with the webcam and analyzed the brightness of the room...

    This idea has been bouncing around for centuries now. I'm not sure, how far the research connected with it came or where the limitation of...

Maybe you are looking for