iPod Classic 80 GB is recognized in the library itunes, but will not be synchronized on my new windows laptop 10?
My iPod Classic 80 GB from 2009 is recognized on my iTunes library when I plug it in, but it does not sync? I have a new windows laptop 10. What can I do?
If you want to synchronize your iTunes music library (from computer, iPod) automatically when you connect the iPod, you need to implement that. By default, it is set up for manual loading. I can explain this process. However, if your iPod currently has all your songs and iTunes library to your new computer laptop does not work, you should not set up automatic synchronization because you will lose all the songs on the iPod. Your current situation is not clear. Please specify what you ask the subject.
Tags: iPod
Similar Questions
-
My firefox is the latest version, but will not update
My firefox is the latest version, but will not update
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
-
Icons wiggle and move in the home screen but will not go to the next page
Icons wiggle and move in the home screen but will not go to the next page
You need to move to the edge and hold the button for a few seconds so he can move to another screen.
-
Fix there work and corrected updates, but updates the load upwards and will not be installed. Error 'WindowsUpdate0000057A' 'Windows update_dt000' on control spent installs almost all office 2003, Excel, Word etc failed sine 5/12 2012.
See if this helps: http://support.microsoft.com/kb/906602
-
The title says it all really.
I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.Help, please.Thank you.original title: vista detection network but will not connectHi JulianBeach,
1. you have made no changes to the computer before the broadcast took place?
2. What is the exact error message you get?
3 is connected to the domain of the computer?
4. what happens when you try to connect to the network?Try the steps from the following link:
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsAdditional information:
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions -
Dell 1230c do not - print jobs go to the queue printing but will not come to buffer
Dell 1230c do not - print jobs go to the queue printing but will not come to buffer
Hey Joe,
Try duration to remove print jobs to remove Job feel stuck in the queue, and then restart your computer.
Also refer to:
Cancel printing
Maybe you have that impression break.
View, pause, or cancel printing
You can also see the troubleshooting steps in Dell for Dell printers.
Please post back with the State of the question.
-
Everything was going well until I refreshed Firefox. Since then, the address bar does not work. If I type in a website or attempt to use the drop-down menu to access a previous site, the site loads but does not "join the service or go the arrow." It is used to automatically load, now it won't load at all! I am running Windows XP
You are running Firefox in compatibility mode for Windows 98 (NT 4.10) according to the user agent.
- Mozilla/5.0 (Windows NT 4.10; rv:36.0) Gecko/20100101 Firefox/36.0
Make sure that you are not Firefox running in compatibility mode.
You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
Make sure that all items are disabled in the tab "Compatibility" in the Properties window. -
Bought a few songs on ITunes and add them to an existing selection. They appear on the computer and in the playlist, but will not be synced to an existing selection on the IPhone 6. Help, please.
This is the computer on which the phone is synchronized, and playlist is selected on the tab music from the phone to synchronize the phone? If the 'sync' button is not a copy the playlist update on you have tried to make a change on the screen of synchronization (for example in selecting/disable-selecting a playlist and sync and then get back on your original selection and re-sync)?
-
Gadget screen appears on the home page but will not move anything to the homepage
Original title: you had to send a solution to my problem of gadget #1194371707
gadget screen happens on my home page but will not move anything on the homepage, you said you would email me a solution, but you responded never please, my case is 1194371707
Delwyn salvation,
Thanks for choosing Windows and thank you for providing an opportunity to help you.
According to the description, you are having problems with gadgets.
1. which browser is installed on the computer?
2. have you visited a support Chat or call?
3. What do you mean by 'will not move not anything to the homepage'?
Since it's Forums Community Microsoft, unfortunately we have not information on case # 1194371707
Answer to us if you are having problems with gadgets or any other problem of Windows, and we would be happy to help you.
Good day!
-
My iPod Classic will not be synchronized with my new MacBook
I recently got a new MacBook Pro and uploaded on most of my old iTunes library to my new computer from my old computer (also a MacBook Pro, even though I had for almost 7 years). I plugged my iPod 160GB Classic (running on 2.0.5) I had bought on iTunes to sync music, but he's not going on the iPod even if the music is displayed on my iTunes. The iPod appears in iTunes and when I hit "sync" the screen of my iPod says that it is syncing, but nothing happens. Nothing has been removed from the iPod, but in nothing added. I still have the old MacBook, but I would stop using it, but of course, I want to be able to update my iPod with new content. What should I do?
If the iPod is currently sync with the old MacBook, it syncs automatically for the new MacBook, unless you change this association. iPods can use an automatic synchronization with iTunes at the same time the library, because sync ("synchronize") means iTunes prevents iPod identical to one iTunes library (or a portion of this library that you select).
You can set the iPod to automatically synchronize with the iTunes library on the new MacBook. In the process, the iPod is deleted and the content of the new MacBook iTunes library is synced to iPod.
OR, you can transfer your iTunes full of the old MacBook to the new MacBook. Then, iTunes on the new MacBook looks like iTunes on the old MacBook (with the exception of versions of iTunes-related changes) with ALL your songs (and other media) as well as supporting data, such as playlists, play count, ratings, date added, etc. Your iPod may be seen as the iTunes library (on the new MacBook) same (old MacBook) iTunes library, because it IS the same iTunes library.
I think that it is better to transfer the full iTunes library... This document describes how to back up your iTunes library on an external drive.
Back up your iTunes library by copying to an external drive - Apple Support
The first step "consolidating" your iTunes data in the iTunes folder, which is located in your folder music user account. Mac, if you use the default settings in iTunes, all your iTunes data should already be in the iTunes folder to a user, but it does not hurt to do this step. The second step copies the folder iTunes on an external drive. The third step restores the backup of the iTunes of the external drive folder. in your case, "restore you" (copy) for the new Mac to replace the iTunes folder that is there. To do this with iTunes does NOT. As you add new songs for the new iTunes folder, you must delete it not; Move it to a new location, such as the desktop. Then copy the folder iTunes of the external drive instead. When you run iTunes on the new MacBook, it uses this iTunes folder, which has your old MacBook iTunes data.
NOTE: You don't have to use an external drive, if you can set up file sharing between two MacBooks. You can do the second and third steps in one fell swoop by copying the folder iTunes directly from old MacBook MacBook again.
After you confirm that all seems right in your iTunes library (restored), you can manually add everything that isn't there in the folder iTunes that you moved to the desktop.
-
uunlocked iphone6 works on all networks 4uk but does not work on mobile thegy delight use EE network it shows 3 bars of signal, but no name even sim card works fine in my 4S but bearer of 6 sows not found mobile delight just advise manual setting of the bu AFN will still not be enabled?
any help appreciated MikeC
Contact the carrier. In all cases the pleasure is not a carrier official iPhone.
-
If I just powerdown (overnight), leaving a/c, connected, the cursor appears and moves, as my mouse moves. HOWEVER, if I powerdown and completely disconnect the PC, 110V, to keep safe from one close shot of lightning, THEN the problem appears. After the storm passed, I plug the PC into the 110 outlet, turn on the computer and restart it. The cursor appears in the center of the screen, but it will not move when I move my mouse. THE ONLY THING I can do is hit briefly, the power button to turn off the back and then click New to reboot (twice now)... then the cursor appears in the center of the screen and moves when I move my mouse.
Yes, I still think it's the battery. If the computer is turned off but still plugged into the wall, food always provides a small amount of power to the motherboard to keep a ready"" State. In fact, if you stop it, but keep it is plugged, you can send a packet to 'Wake-on-LAN' through the Ethernet that would then turn on your computer so you don't have to press any button at all. This requires that some things are always under tension even when the rest of your computer is turned off. Remove the plug from the wall removes this standby power and now the BIOS of your motherboard must hold his memory by falling back on the battery.
HTH,
JW -
I can't get rid of this pop up asking to restart or online solutions. I chose these two options in the last days and even managed to get into the restoration of the system (not easy without windows), but nothing works and I'm about to throw this pop up window with my laptop.
'
Hello
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
-
I have flashed my BIOS, the PC POSITIONS, but will not install Vista (or XP)
I could use some help. Update the BIOS on my ASUS M4A78T-E to the version current (1302 to 3406) I hope to solve a weird problem with the system loss of the year in the CMOS. And now VISTA will not load.
Fine finished BIOS (cleared the CMOS memory (pulled the battery, moved rider th 20 minutes), the start-up of the PC will be, going by a screen start, completed POST with no problems, but do not load the o/s.) I get the screen of boot F8 options, it seems to have detected the BIOS change, but the selection of safe mode, through normal startup.
I tried all the boot options, and none will. So, I grabbed my Vista Ultimate 64 bit CD and planned boot from that and run a repair. It does not - files all seem to copy, and then it crashes. Sometimes I can get to the initial screen (much colorful screen), but it still crashes.
I tried with the 32-bit disk with no luck.
I tried with my old Windows Xp disk and files copy them all, but when he seems to want to start Windows, it crashes.
Options?
Thank you!
Lose the date system is usually down to a cmos battery failure, unless its companies specifically named in the bios update information.
If its either that or a motherboard problem, none would be fixed by an update of the bios
-
I had some problems with my computer and everything seems to work ok except when I use the resolution of problems. I get error code 0 x 80070490. When I search in Microsoft.com it suggests that I run Mr. Fix It but when I click to run it nothing happens. I am running Windows 7 Professional, Service Pack 1, 64-bit. Thank you.
Hey Dallas Fontenot,
You can view this issue in Microsoft Fix it Center - NOT for general support questions: http://social.microsoft.com/Forums/en-US/fixitcenter/threads
Additional information.
Windows Update, error 80070490: http://windows.microsoft.com/en-in/windows7/windows-update-error-80070490
Repair installation WARNING: performing a repair installation will restore you the current installation of Windows for the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD. Run a repair installation will not damage files and applications that are currently installed on your computer.
Thank you.
Maybe you are looking for
-
Runtime error! R6034. App does try to load the wrong C runtime library
The best to uninstall and start again?
-
How to check that I use the latest version of firefox?
I received a message that I don't have the latest version of firefox installed but when I hit the button install a threat warning screen appeared. I chose to get out of there and did not receive the screen setup again.
-
. Lost exe file association: need a permanent solution
About 5-6 months, I had a problem with a .exe file association. I could not open any programs (gadgets sidebar, Skype, msn, etc.). I searched through many solutions which work.I downloaded Microsoft Fix It ( http://support.microsoft.com/kb/950505Micr
-
Windows defender 0x800106ba failure to use
This will make my computer not be able to get online?
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to