iPod Classic takes a long time to Sync

Similar Questions

• desktop computer takes a long time to load after uninstall of netware

  Dear Pascal, recently, by chance, I installed the client service for Netware on my PC. He asked to restart the computer, and after reboot, logon screens became classic. I uninstalled netware by accessing the properties of LAN. I managed to restore logon screens using Microsoft resources available on the net. However, my PC now takes * for long time for the desktop icons and toolbar are displayed. I use Microsoft Windows XP Version 2002 SP3, Intel Core2Duo processor P8600 @2.40 Ghz with 2 GB of RAM on Lenovo Thinkpad R400. I understand that it is after uninstalling the netware client that my office is very very slow. Help me for a faster loading of the desktop computer. Best regards, Reba Shankar

  Hey Reba,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem.

  If I understand correctly, you have some performance issues on windows XP computer.

   

  Let us try the following steps:

   

  Method 1: Any installed program must be uninstalled from Add and remove programs. You can just remove shortcuts from other places like LAN properties.

  Run the following fix - it to uninstall client services for Netware.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/program_install_and_uninstall

   

  Method 2: See the following article:

   

  How to make a computer faster: 6 ways to speed up your PC:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=uQRRD6ZPxkC

   

  Important notes:

  ·         Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  ·         The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Firefox takes a long time to close since a recent update and memory of pigs.

  Since the recent updates that have begun to use containers of plugin, Firefox takes a long time to close. If I try to go back there, he said that it is still running. I have liik in the Manager of tasks and about seven containers plugin. exe is running, and I turned off or disabled mostplugins and addons, same Quicktime. Firefox uses an obscene amount of RAM on my XP machine and rendered sluggish. I use XP SP3. This started after you added the plugin container in one of the recent updates earlier in the year. For the features it offers me or does not offer me, instead, it uses far too much RAM and is too slow. And takes a long time to close when I close the browser. It uses about twice as much RAM as it was.

  Upgrade your Firefox 9 browser and check

  • getfirefox.com

• Pages take a long time to load in versions 6,7 and 8, version 5 works fine.

  Version 5 works fine, when I updated to 6.7, and now 8, pages take a long time to load. It's on 2 different computers, one with Vista, Windows 7 other. If I restart Firefox it helps, but the problem comes back. Does not happen with IE or Opera.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections 256-30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• The system preference takes a long time to load

  As the title suggests, end of 2013 (10.11.4) System Preferences on my iMac takes a long time to load, even after a fresh reinstall and/or reboot (tried both). It takes about 20 seconds to one minute each time to open (except when I close it and immediately open it once again, as it is always loaded in memory). This problem existed only after the upgrade to El Capitan, and I saw many other people with iMacs with the same problem. I tried to remove cache for before system preferences files, but that did not help at all. I don't have a FileVault if it makes a difference, even if I did before reinstall, but never turned back (persistent question anyway). Any recommendations would be useful. Thank you!

  Data sheet:

  iMac (end 2013)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  1 TB 5400 RPM HARD DRIVE

  Intel Pro Iris 1536 MB

  I found it is the State of affairs in 10.11 if running a HD spinning.  Don't feel alone.

  I suspect that it is a function of low priority in the memory compressed algorithm.

  Upgrading to an SSD and it will rise to attention.

• Satellite M300 PSMDCA takes a long time to start

  I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

  First of all, when you start the computer, it takes a long time to start and activate Outlook.
  I am running Windows 7Home Premium.
  Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

  Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

  Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

  Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
  Quite often when scrolling on the websites of the page I'm going to freeze?

  I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

  Any thoughts? Thanks, Shirl51

  > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  This nonsense!
  The system should boot up quickly my laptop needs 30 seconds to start.
  In my opinion, the system is screwed

  In your case, I recommend to reinstall the system.
  Did you create the recovery disk?
  If this isn't the case, I think that detailed instructions should be placed in the user's manual.

  After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!

• I have more than music in itunes my ipod can hold, the last time I synced, there was a box to synchronize playlists only, now it's over so how can I now sync playlists only, you can see?

  I have more than music in itunes my ipod can hold, the last time I synced, there was a box to synchronize playlists only, now it's over so how can I now sync playlists only, you can see?

  Select the iPod in iTunes (click on its button on the device on the horizontal bar) to show its settings screen in the iTunes window.  The side left (in the sidebar), under settings, click music.  To the right, the settings screen of music from iPod, where you tell iTunes how to sync songs to the iPod.

  NOTE: All of the songs on the iPod that are not in your iTunes library (on the computer) will be lost.

  Check the box to Sync music (if it isn't already).  Below, choose the option synchronize playlists, artists, albums, and genres.  Below, under playlists, select (check) the playlists you want on the iPod.  You can also select other articles on other lists, as you wish.  Click Apply to sync your selection to iPod.

  Further, iTunes automatically updated the iPod with the changes made to the selected part of the iTunes music library.  For example, if you update a list of selected reading (add/remove songs), updates iTunes, the iPod with the same changes the next time you connect (or click Sync if already connected).

• My 3rd generation takes avery long time to load, is this normal?

  My 3rd generation I - pad takes a long time (hours) to load.  Is this normal, or should I consider service?

  Hello

  Make an appointment at apple store for a battery check

  They can offer an out of warranty repair / replacement

  But you have to pay part of the cost.

  See you soon

  Brian

• Visual Studio 2008 Pro takes a long time to start after the installation of measurement Studio 2009

  After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.

  I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out.  I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).

  Just curious if anyone has encountered this kind of slow startup time and found a solution.

  Thank you!

  I found an article referring to a question similar to MS 8.1.  I don't know if the problem has simply not been corrected or why I am still having this problem.  Workaround "per computer" listed in the article solved my problem.

  http://digital.NI.com/public.nsf/allkb/18E25101F0839C6286256F960061B282 I have

• XY graph sometimes takes a long time to update legend

  Hello

  I wrote a small piece of code that highlights (changes line width) the plot on the graph when we click a mouse on its name in the legend of the plot. The code works well except when I the legend scroll bar is visible and its position is not 0, then when I click on the name of the parcel, the chart takes a long time(>4s) to change the width of the plot on the legend. The plot on the graph is updated instantly. Its only the legend of the plot that takes a long time to get updated.

  I enclose the code here... Please, run it and see if you also see the same behavior.

  Thank you

  Ritesh

  Hi Ritesh,

  The patch of f2 is already released. http://www.NI.com/download/LabVIEW-development-system-2015/5656/en/

  We will inform you of the R & D of your first question, but unfoturnately we cannot provide information on future products releases.

  Kind regards

• videos take a long time to buffer

  There are a few dat I could watch fine Inc. and now it will take a long time for the buffer viedo and still have problems

  Hello

  1. what operating system is installed on the computer?

  2. what version of web browser work?

  3. do the same thing happens with all the videos that you try to play?

  4. I think you are referring to the videos online?

  5. How do you try to play the video?

  If you use Internet Explorer and facing problems, watch videos online, then you can check out the link below:

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note:

  There is no option within the operating system to increase the speed of buffering. Only way to increase the speed of buffering in some measure is to have a connection with a higher bandwidth. But note that as does you not an option of continuous play in CD or DVD.

  Another work around that I do personally is to pause the video to complete the buffering and watch the video once the buffering completed.

  I hope this helps!

• Can any1 help me why my newly purchased Aspire e5-573 takes a long time to gt began

  Hi all

  I bought a new Acer laptop (Aspire E5 - 573) just 20 days ago, and it takes a long time to start (almost 8-10 minutes), although it works fine once it is started.

  Can someone please help me understand who is there any problem with my laptop, or it's just the way it works.

  I'm not a very irritable kind of guy and first use on laptop (per person).

  Help, please

  Best regards

  Ashish

  [edited for the protection of personal information - please do post any personal or unique information such as but not limited to names, email addresses, telephone numbers, serial numbers, etc..]

  Windows 8 and more, it is built in antivirus called Windows defender, it's enough.

• Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Hello C Johnston,

  Did experience you these issues when streaming video from any other website?
  It is possible that the servers of YouTube we perform slowly at this time here. This is the problem?
  You might try to optimize Internet Explorer to see if it helps at all:
  http://support.Microsoft.com/kb/936213

• My CPU runs at 100% without no reason and programs take a long time to open.

  A FEW TIMES WHEN I TRYING TO OPEN A PROGRAM FOR EXPLORER MOMENT HE TAKES A LOT OF TIME IT OPENS

  original title: RUN MY CPU to 100% BY MOMENTS AND PROGRAM TAKES a long TIME TO LOAD what COULD BE WRONG

  Hello

   
  You can try the steps in the following link and check if it solves the problem:
  http://www.Microsoft.com/athome/Setup/optimize.aspx
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  I hope this helps!

• My computer is very slow and takes a long time to connect and disconnect

  Original title: sign out of questions

  My computer is very slow and takes a long time to connect and disconnect. Sometimes I hit Logoff button and do not forget I have more work to do... is it possible to cancel the newspaper once it starts, or should I just wait what he log out completely and then reconnect? (It takes just forever)

  Install the background file. See if it suits it