iPod nano 7 will not recognize Bluetooth devices

Similar Questions

• After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support

• Printer not recognize bluetooth devices

  When I perform a search for bluetooth devices with my printer Photosmart Premium C309 printer will not find devices.  I have associated my Samsung Galaxy Tab 3 the printer.  The Samsung recognizes the printer, but the printer wiil not found the tablet.  What is going on?

  Unfortunately, you have the older version. Looks like the buit - in Bluetooth is not happy with android. It coucd be an android version installed in the tab.  Chances of firmware updated with a printer this old are almost nil.

• Satellite L855 - 10 p will not see Bluetooth devices

  HELP PLEASE!

  I'm not very tech of mind. I've had my toshiba laptop hardrive replaced someone had already managed to get the laptop to work for me that I had the same problem with the connection. It says Bluetooth is not ready when I right click on the Bluetooth icon at the bottom of my screen and go to settings and click on new connection. If I left click the icon Bluetooth at the bottom of my screen it only says not connected.

  What is the solution and be very explicit as I am not Gil upward on anything. I did things that I found on youtube and other sites using google, but usually I get halfway and find there instructions to go until then I don't see what they are doing then we can say then click it Bluetooth then blah blah, but either the icon is not there or anything else, they say click isn't here...

  Thanks in advance for anyone who can help me lol. Carol

  My son got the laptop to update the drivers by clicking on the symbols of bluetooth in my laptop control thing so now it allows the Assistant to shown and will now search for the devices BUT it appears with no thought even detected devices that phones are visible

  Please HELP, I need a simple step by step guide because I'm not a snack very tech PC and I am always scared to change whatever it is I'm doing something wrong lol

• Win 8 laptop does not not, freezing and sometimes will not recognize boot device.

  Back story:
  A friend asked me to look at their laptop, because it was very slow and has frozen all the time. a quick inspection, I noticed a few things. After starting windows 8 (not 8.1) the processor turned to 99% of the max. Which may explain the slow down and freezing. She was loaded with adware.

  I backed up his photos and important files used then option factory reset to win 8. After the reset, I have named his computer, gave him a user name and password, then came to mean something in the sense of "configure user settings do not turn off computer. This screen has taken a lot of time and would sometimes change color. I let him do his thing at night. Morning came, and he seemed to have frozen on this screen. I turned it works.

  Current problem:

  Usually when it is powered on it will say there is no bootable media.

  Sometimes, when his engine, windows starts and I can enter a username and pass and sign... However, as the mouse moves, I can click on anything whatsoever. The touchscreen does not work. Its more of a shell of a BONE.

  One of my tech friends think that the hard drive is running out. I don't think that this is the case and wanted a second opinion. IM thinking the error over the whole upward is the problem. I don't have a recovery disk. Is there a file I can put on a flash drive and use it to repair or reinstall Win 8?

  Related issue:

  Its battery is completely shot (don't hold a charge at all) and I can't seem to find a new replacement battery

  I put a repair of windows on a USB tool. Pluged that it active on the computer. He acknowledged the corruption of files, fixed and allowed me to put back correctly.

  Thanks for trying, even if I felt that my question was not being read correctly.

  2 of my tech friends says he can be the hard drive failure. This was not the case either.

  The laptop has a corrupt windows file that was causing problems. zero second release fixed this problem. Now the laptop worked well without any problems for 24 hours.

  This case is closed.

• Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Kev2012 wrote:

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  It would depend on what you're trying to link to?

  Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support

• Satellite Pro L10 - USB port will not recognize devices

  Hello

  I got a L10 for 18 months. Under the guarantee, I got a replacement motherboard mounted. Everything has been ok so far. A USB port will not recognize devices, a port is ok, but randomly turns off a device attached to it and comes up with the message "USB device not recognized". The third port is ok all the time.

  Any solutions or suggestions?

  Post edited by: caddy

  I guess there is not enough power on the USB ports and external devices may not work correctly. It is not easy to say why this happens, but there may be a problem of welding.

  I recommend you contact the service again as soon as possible.

• Optiarc cd - rw crx880a ata device will not recognize any cd

  I have an acer laptop. It is an Optiarc cd - rw crx880a ata device. It will not recognize any cd / dvd... He appears with insert the cd. I open and close the cd drawer and always the same pop-up.

  My operating system is windows vista.

  Then you know that the drive is bad. You will need to buy a compatible optical drive, Acer or an after-market reputable dealer. Since it is a laptop, you can buy the disc just for her. Yes, it's probably easy to replace. Refer to the manual of your computer or search for a manual on the Acer tech support site. MS - MVP - Elephant Boy computers - don't panic!

• Windows 7 will not recognize my iPad

  Windows 7 will not recognize my iPad when it's connected via USB port

  Hi Richard,

  1 have you tried the steps in the post above?
  2. the problem occurs only with the ipod?

  Method 1
  I suggest you run the hardware and devices Troubleshooter and see if that helps.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  Try the steps from the following link (applies to Windows 7)

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!

• I just bought itunes game. New songs THAT SINCE won'y sync, I bought with my ipod Nano. Will they or is an incompatible Nano ipod?

  I just bought itunes game. New songs THAT SINCE won'y sync, I bought with my ipod Nano. Will they or is an incompatible Nano ipod?

  Hello

  I hope the music in your iTunes library and is not in the cloud, you should be able to sync with the iPod nano, which remains compatible with iTunes iOS.

  Jim

• File Manager XP PRO SP3 will not recognize USB floppy A: drive

  File Manager XP PRO SP3 will not recognize USB floppy A: drive

  The system tray alerts "new hardware found" and "installed".

  In the system. material | Device Manager | floppy drives, the disk is present, activated and works

  If I pay BACK the drive is located and can be read and written.

  The drive is not the case in (windows explorerer file manager.

  The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.

  In the removable storage service is started.

  If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.

  This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.

  Any ideas?

  It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.

• Fuze 4 GB will not recognize the change of information tracking

  Right then, I had some problems with my Fuze MP3 player. When I download the new music on the device, the ID3 tags all come out the way they are supposed to. However, if I remove the music that is on the drive and replace it with the same tracks with ID3s update, it will not recognize the change of title, album, or artist, if the song file will be updated. I know because I had problems with the songs with the same name or accidentally given songs the name of another song, which resulted in incorrectly labeled music.

  I tried to format the drive, I tried to remove the music manually in the file system, I tried to change the USB mode and delete the file that I said holds the ID3 data, and I tried all the possible permutations of disconnection and let the Player recognizes the changes. This includes the removal of all the music in the player, disconnection of the latter, confirming that there is no music on the system, to change the USB mode, deleting the file with the ID3 information, turning the rear USB mode, reconnect, put my music on the device, and the problems have not been resolved.

  It is likely, it is just to be fickety, and there is something I'm don't is not right, but it's the second "rocket" I've owned - I love the model and went up to return a Fuze + in favour of the former model - and one has never had this problem. I'm willing to try anything within reason to solve the problem, so I hope someone can point me in the right direction.

  In fact, the problem was not as expected at all. I think it turns the problem is Windows Media Player, which I only use to sync my music on my MP3 player, had a library with outdated information. So after the Player update multimedia, I refreshed my library recordings and everything worked as you wish. I just to make sure that if I make changes to existing songs in my library.

  Thanks for all the help, guys, guess it was on my end.

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.