iPod Shuffle 2nd generation

Similar Questions

• iPod shuffle 2nd generation will not be a link with itunes

  I just brought a used ipod shuffle 2nd generation and I can't seem to associate with my itunes account dosnt see toward the top in the list of devices? It binds with laptop and with the car but can't put mt on her music and her full load of expensive! and bon Jovi show!

  any advice will be welcome tried alternative lead? Potty

  Cheap and good jovi...  That IS indeed a serious problem.    But at least the iPod still plays music, so its battery is OK.

  You use the USB cable supplied with 2nd gen iPod?  It is long with a cradle at the end of the shuffle.  The replacement of home cable shuffle Apple sells currently is to shuffle 3rd and 4th generation and does not work with 2nd gen shuffle (connector is different).

  There are third party replacement cables, but they must be described as 2nd gen shuffle.  And they tend to be cheap and of poor quality, then this might be the problem here.

  If you have the right type of cable, when you connect it to the USB of your computer, look at the little light the shuffle.  Blink initially when it is connected?  It turn on, but remain solid (not flashing)?  There is No light at all when connected?

  Also, are you using a Mac or a Windows PC?  If Windows, which free?

• I have ipod shuffle 2nd generation and need new charger (dock) can still buy these?

  I have ipod shuffle 2nd generation and need new charger (dock) can still buy these?

  Apple no longer sells the official replacement of the USB cable with the "cradle".  Do not buy the replacement USB docking cable for the current 4th gen (3rd generation) iPod shuffle, because it does not work with 2nd gen shuffle (the connector is different).

  There are 3 replacements of party, for example

  http://www.Amazon.com/eForCity-Sync-Charger-cradle-shuffle/DP/B0042EB270/

  There are other products similar, including some who do not have the cradle, and some who do not even have a cable (like this one)

  http://www.eBay.com/ITM/USB-data-sync-charger-cable-for-Apple-iPod-shuffle-2nd-G balances - / 221546931454

  Ensure that the product is described as being the shuffle gen 2  I'd go with one that has a docking station, because it maintains the shuffle at a constant specific position compared to the socket, which can be important for a shuffle gen 2.

• Windows Vista Service Pack 2 Basic /iTunes and iPod Shuffle (2nd generation)

  Does anyone know how or if it is even possible to get my computer to recognize my iPod?  I made each available update, my usb ports work, the computer is new, my iPod works in my friends computer with XP and connects very well.  When I plug my iPod the computer does not see it, I can ' find any device driver to install online, they all said that they should auto install when I plug.  I tried the online help but he keeps telling me to manage add ons and click to install ActiveX controls, but there is nothing there that says that.  I'm fighting it all day and am willing to say that Microsoft is the worst company ever.  I hate their OS, I hate their support (what there is of it without having to pay even more money), and I hate myself for buying a pc and not a mac.

  rmvisme,
  Thank you for visiting the Microsoft Answers community forum.

  The only way to get your iPod to work with any computer, be it a PC or a Mac is by downloading and installing iTunes.  You can download on the Apple support site: http://support.apple.com.  Once you have installed, you should be able to sync your iPod, manage your library, burn CDs, etc.

  Let us know if you need more information.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IPod Shuffle 2nd Gen not recognised in Win 7 64 bit

  My iPod Shuffle 2nd generation is not recognised in Win 7 64 bit.
  It does not appear in iTunes or my computer.
  It does not work in my other PC Win XP 32 bit, I even restored it on my other computer, but when I connect it to my PC Win 7 is not.
  I also have the latest version of iTunes for 64-bit installed
  Error #43 appears also in devices when I connect it.

  Hi Antonio,.

  1 is. the computer able to recognize any other USB device?

  2 is the issue limited to Ipod Shuffle 2nd Gen?

  3. don't you make changes to the computer before this problem?

  Follow these methods.

  Method 1.

  Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  You can disconnect all USB devices and then perform the following steps:
  1. click on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Method 3.

  If the question is limited to iPod, you can view this issue in Apple Support communities: https://discussions.apple.com/index.jspa

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• My iPod nano 2nd generation gets disk errors after installing iTunes?

  I use my iPod nano 2nd generation for... Wow little almost 10 years now and of course is not as sensitive, a little laggy sometimes, battery life isn't as good but still never had real problems with it that can be repaired by a reset. Well not until now and I have not really money to spend to get a new, in particular the fact that practically it still works fine on his own, just that I can not add or remove pieces of her more.

  The problem

  It seems that the computer has trouble reading the device. Whenever I plug my iPod nano 2nd generation USB in my laptop (Windows 10), which has some sort of interaction with it freezes. For the moment I plug in, programs such as Winamp, iTunes, File Explorer (if I click my computer-> try to right click on the drive, that says all F: drive instead of the usual name recognized as "My iPod."), the Device Manager when I try to turn Apple iPod USB Driver and the small icon in the system tray when you try to eject the drop-down list no longer appears, all these programs themselves just freeze and unresponsive until I unplug the device. In Event Viewer, the moment where I plug it, it gets spammed by looping errors to:

  Error: The device, \Device\Harddisk1\DR21, has a bad block.

  ATTENTION: An error was detected on device \Device\Harddisk1\DR21 during a paging operation.

  So, basically, it seems that the computer is blocked just not try to read and recognize the device, which means that I can't really do anything with it. The iPod itself seems to work fine, I can hear songs, recharge the battery and other things, earlier I can't add or remove pieces of her.

  Stuff leading up to it

  A year or two before, I used to manage the ipod via itunes (a relatively old version of time too I guess since I almost never update) until I formatted my laptop some time ago and never bored computer reinstall itunes. Since then, I really didn't need to change anything to my iPod and just use Winamp (my default music player) to the add/remove songs when I needed to. Today, I decided to install iTunes because there are some things that winamp cannot do as add embedded lyrics and also winamp blurs the sorted list of the song. Since then, after you have installed the new iTunes, start freezing and program I get the problems described above. There might be a chance that iTunes was not the real culprit and the disc was already beginning to get corrupted or something somehow, but I can't think of anything that's happened before this problem started.

  I tried many things

  • Uninstalled iTunes and all the other stuff related to the installation as pie, Apple Mobile Device Support... .etc
  • Reinstall the device driver USB Apple iPod. When I turn it off (Plug in iPod-> iPod poster 'do not disconnect'-->--> Device Manager driver right click-> disable-> Device Manager freezes up-> unplug ipod-> Device Manager-> thaws plug ipod in) ipod becomes simply the State of charge. Steps to reinstall is the same (need to plug and unplug).
  • Reset iPod in now the Center button + menu button.
  • Will then resetting operation rewind + Centre button iPod diagnostic mode. It is not a test disc hard because I guess nano doesn't have a disc hard just flash ram. Anyway, when I select SDRAM QScan he only says: "SDRAM OK." NAND_SPEC gives "NandLBA = 1982464". Flash gives Checksum "Checksum is 0x26AF".
  • Wanted to try as described here to check for disk errors, but cannot because the computer cannot correctly recognize and explore freezes if I right click. I tried using 'chkdsk f:' in the command prompt, but that seems to hang as well.
  • Switches mode disc reset ipod then now Center + play button. Then connect the laptop... etc, same problem.

  It's a pretty old device, so it seems that support because it is very rare. I didn't install iTunes could screw up the device that it is intended to support and do anything as permanent as this one.

  You must exclude a faulty USB, cable anchorage, try another, or using your power with another Apple device cable, to confirm that it works correctly.

  Otherwise, your troubleshooting seems complete.  If that's what you've done for disc Mode

  How to put your iPod in disc - Apple Support mode

  and connection to your computer causes this issue General 'freeze' with multiple processes, the iPod has possibly a hardware problem.  Flash storage eventually.  Or it can be a problem on the logic board of the iPod.

  I suggest try to reformat the iPod using Windows, as if it were a USB flash drive.  But you can only do if the system hangs when you connect iPod.

  NOTE: If you find a way to reformat iPod using Windows, use FAT32 as the disc format.  If there is an option to do a quick format, do a full format instead.  Once the process is complete, the iPod is totally blank.  You do restore using iTunes (if you are prompted or not), to the embedded iPod software.

• Unable to sync iPod Touch 2nd generation

  My father has an iPod Touch 2nd generation he is used to synchronize the contents of iTunes.

  It is OS x 10.11.6 and iPod has the latest iOS available (4.2.1). I tried to reset the iPod, but it won't always sync to iTunes (12.4.3). This generation is too old to synchronize with iTunes? I do not understand because my old 7th generation iPod classic allows you to synchronize perfectly well.

  What exactly happens when you try to synchronize?

• cannot change the playlist on the ipod shuffle 4th generation - the computer sees it but I can't do anything with it

  I have 3 ipod Shuffle (4th generation).  Two connect to iTunes without problem.  1 can be seen by iTunes but I can't edit the playlist and I don't get any options by clicking on the icon in the upper left corner to be able to restore it.  Any suggestions please?

  Thank you

  Try to reset the device, and then try again. Reset the iPod shuffle - Apple Support.

  TT2

• Get the 1415 error message when you try to restore the iPod shuffle 4th generation

  Cannot restore the iPod shuffle 4th generation - to get the error 1415

  Have you tried the suggestions in the linked document?

  If you see the error 1415, 1417, 1418, 1428, 1429, 1430, 1436 or 1439 during restore or update iPod in iTunes - Apple...

  Is your computer running iTunes on a Mac or Windows PC?  If Windows, what version?

• How can I copy music to a new computer from my iPod nano 2nd generation

  How can I copy music to a new computer from my iPod nano 2nd generation

  You will need to use 3rd party software to do.

• My iPod shuffle 4th generation yellow light flashes. What does that mean?

  My iPod shuffle 4th generation yellow light flashes and I can't find this in the manual that comes with it, or in the manual online more great.  What it means when the yellow light flashes. ??

  May be the battery > iPod shuffle (4th generation): check the status of the battery

• My iPod Shuffle 2nd Gen the same song just rehearsals

  I have an Ipod 2nd generation shuffle, and he will never play the song I put on, he would usually play about 6 of the continuously, despite having lots of songs on this subject. I recently restored to factory settings and got 64 songs on it, but he will play only one of them, which she repeats,

  The shuffle uses flash storage.  Flash storage ends by wears.  Thus, the cause may be a hardware problem on your shuffle, especially since a 2nd gen shuffle is about 10 years at this point.

  One thing you can try is to reformat the shuffle outside iTunes store.  This must be done in a particular way.  Are you using a Mac or a Windows PC?

• IPod touch 2nd generation, cannot start the dfu mode

  Hello!

  I have a 2nd generation Ipod which is is disabled because of lost password. So I know no more iOS type.

  The problem is that I can't open the dfu mode even if I tried "all" solutions that the web has to offer.

  Whenever I have connect the ipod to the pc, Itunes response is "Itunes can not connect to the device because it is locked. "You need to type the code before it can connect to iTunes."

  I tried the approach that Apple recommended but it does not work. The final solution, I tried was to download recboot and see if I could activate this way dfu mode, but only has not to be helped.

  Turn off the iPod Touch. Press in and hold the home button while connecting to iTunes, make sure that you press and hold the home button before you connect and keep holding until you see the recovery screen, must look like the one below. Once to this iTunes screen should warn you that it detects an iPod in recovery mode and needs to restore. Now, just click on restore and iTunes will restore the iPod touch, no code necessary. I hope this has helped!

  

• iPod Shuffle (4th generation 2012) bad songs deleted

  Recently, my father gave me his iPod Shuffle, and I wanted to change a part of the music on it. I connected the connected device to iTunes, has given the permissions of my laptop, and well as the device and his music appears, I cannot change anything and can not find the file on my computer. I've seen other issues similar to this and tried their responses, but so far nothing has worked. Any advice?

  Hey Copperdog555,

  Looks like you are having problems with your iPod shuffle syncing newly received with your iTunes library. Please make sure that you are running the latest version of iTunes by checking the updates in your App store. If you don't have any music in your iTunes library, try to add the music to the library first, and then try to sync with the iPod shuffle. Once the synchronization was successful, it will erase all songs currently on the device and replace it with what you have added to the iTunes library. The links below will help you get this done.

  Get the latest version of iTunes

  Search and organize your iTunes media files

  iPod shuffle support

  Sync your iPhone, iPad or iPod touch with iTunes on your computer through a USB port

  Please use the Apple Support communities for help. The above steps will have you listen to your favorite songs in no time at all!

  Have a great day.

• How to record music from a cd to the ipod shuffle (4th generation) with wondows vista?

  IAM trying to record to a new ipod shuffle using windows media plyr. on windows vista on a cd that I own

  The following items may be worth a visit:

  Guide to the new user Shuffle iPod
  http://support.Apple.com/kb/ht1654#section3

  Adding music and other content on iTunes
  http://support.Apple.com/kb/HT1473
  (see: add songs to an audio CD)

  Syncing music to iPod or iPhone
  http://support.Apple.com/kb/HT1351?viewlocale=en_US